RFC4069: Definitions of Managed Object Extensions for Very High Speed Digital Subscriber Lines (VDSL) Using Single Carrier Modulation (SCM) Line Coding

Download in PDF format Download in text format






Network Working Group                                           M. Dodge
Request for Comments: 4069                                   ECI Telecom
Category: Standards Track                                         B. Ray
                                                  PESA Switching Systems
                                                                May 2005


                Definitions of Managed Object Extensions
       for Very High Speed Digital Subscriber Lines (VDSL) Using
              Single Carrier Modulation (SCM) Line Coding

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (C) The Internet Society (2005).

Abstract

   This document defines a portion of the Management Information Base
   (MIB) module for use with network management protocols in the
   Internet community.  In particular, it describes objects used for
   managing the Line Code Specific parameters of Very High Speed Digital
   Subscriber Line (VDSL) interfaces using Single Carrier Modulation
   (SCM) Line Coding.  It is an optional extension to the VDSL-LINE-MIB,
   RFC 3728, which handles line code independent objects.



















Dodge & Ray                 Standards Track                     [Page 1]

RFC 4069                 VDSL-LINE-EXT-SCM-MIB                  May 2005


Table of Contents

   1.  The Internet-Standard Management Framework .............. ....  2
   2.  Overview .....................................................  2
       2.1.  Relationship of this MIB Module to Other MIB Modules ...  3
       2.2.  Conventions Used in the MIB Module .....................  3
       2.3.  Structure ..........................  ..................  3
       2.4.  Persistence ............................................  4
   3.  Conformance and Compliance ...................................  5
   4.  Definitions ..................................................  5
   5.  Acknowledgements ............................................. 14
   6.  Security Considerations ...................................... 14
   7.  IANA Considerations .......................................... 16
   8.  References ................................................... 16
       8.1.  Normative References ................................... 16
       8.2.  Informative References ................................. 17

1.  The Internet-Standard Management Framework

   For a detailed overview of the documents that describe the current
   Internet-Standard Management Framework, please refer to section 7 of
   RFC 3410 [RFC3410].

   Managed objects are accessed via a virtual information store, termed
   the Management Information Base or MIB.  MIB objects are generally
   accessed through the Simple Network Management Protocol (SNMP).
   Objects in the MIB are defined using the mechanisms defined in the
   Structure of Management Information (SMI).  This memo specifies a MIB
   module that is compliant to the SMIv2, which is described in STD 58,
   RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
   [RFC2580].

2.  Overview

   This document describes an SNMP MIB module for managing the Line Code
   Dependent, Physical Medium Dependent (PMD) Layer of SCM VDSL Lines.
   These definitions are based upon the specifications for VDSL as
   defined in T1E1, European Telecommunications Standards Institute
   (ETSI), and International Telecommunication Union (ITU) documentation
   [T1E1311, T1E1011, T1E1013, ETSI2701, ETSI2702, ITU9931, ITU9971].
   Additionally the protocol-dependent (and line-code dependent)
   management framework for VDSL lines specified by the Digital
   Subscriber Line Forum (DSLF) has been taken into consideration
   [DSLFTR57] and [DSLFWT96].







Dodge & Ray                 Standards Track                     [Page 2]

RFC 4069                 VDSL-LINE-EXT-SCM-MIB                  May 2005


   The MIB module is located in the MIB tree under MIB-2 transmission.

   The key words "MUST", "MUST NOT", "RECOMMENDED", and "SHOULD" in this
   document are to be interpreted as described in [RFC2119].

2.1.  Relationship of this MIB Module to Other MIB Modules

   The relationship of the VDSL Line MIB module to other MIB modules, in
   particular to the IF-MIB presented in RFC 2863 [RFC2863], is
   discussed in the VDSL-LINE-MIB, RFC 3728 [RFC3728].  This section
   outlines the relationship of this VDSL Line Extension MIB to the
   VDSL-LINE-MIB, RFC 3728 [RFC3728].

2.2.  Conventions Used in the MIB Module

2.2.1.  Naming Conventions

   A.  Vtuc -- VDSL transceiver unit at near (Central) end of line
   B.  Vtur -- VDSL transceiver unit at Remote end of line
   C.  Vtu  -- One of either Vtuc or Vtur
   D.  Curr -- Current
   F.  Atn  -- Attenuation
   J.  LCS  -- Line Code Specific
   K.  Max  -- Maximum
   Q.  Mgn  -- Margin
   S.  PSD  -- Power Spectral Density
   T.  Rx   -- Receive
   T.  Snr  -- Signal to Noise Ratio
   U.  Tx   -- Transmit

2.3.  Structure

   The SCM VDSL Line Extension MIB contains the following MIB group:

   o   vdslSCMGroup :

   This group supports MIB objects for defining configuration profiles
   and for monitoring individual bands of Single Carrier Modulation
   (SCM) VDSL modems.  It contains the following tables:

      - vdslLineSCMConfProfileTxBandTable
      - vdslSCMPhysBandTable

   If the SCM VDSL Line Extension MIB is implemented then all objects in
   this group MUST be implemented.

   Figure 1 below displays the relationship of the tables in the
   vdslSCMGroup to the vdslGroup and to the ifEntry:



Dodge & Ray                 Standards Track                     [Page 3]

RFC 4069                 VDSL-LINE-EXT-SCM-MIB                  May 2005


      ifEntry(ifType=97)  ----> vdslLineTableEntry 1:(0..1)

       vdslLineTableEntry (vdslLineCoding=SCM)
             ----> vdslPhysTableEntry 1:(0..2)
                 ----> vdslSCMPhysBandTable 1:(0..5)

       vdslLineConfProfileEntry(vdslLineConfProfileName)
                     ----> vdslLineSCMConfProfileBandTable 1:(0..5)

                       Figure 1: Table Relationships

   When the object vdslLineCoding is set to SCM, vdslLineConfProfileName
   is used as the index to vdslLineSCMConfProfileBandTable.  The
   existence of an entry in any of the tables of the vdslSCMGroup is
   optional.

2.4.  Persistence

   All read-create objects defined in this MIB module SHOULD be stored
   persistently.  Following is an exhaustive list of these persistent
   objects:

      vdslLineSCMConfProfileBandId
      vdslLineSCMConfProfileBandUsage
      vdslLineSCMConfProfileBandCenterFrequency
      vdslLineSCMConfProfileBandSymbolRate
      vdslLineSCMConfProfileBandConstellationSize
      vdslLineSCMConfProfileBandTransmitPSDLevel
      vdslLineSCMConfProfileBandRowStatus
      vdslLineSCMPhysBandId
      vdslLineSCMPhysBandUsage
      vdslLineSCMPhysBandCurrPSDLevel
      vdslLineSCMPhysBandCurrSymbolRate
      vdslLineSCMPhysBandCurrConstellationSize
      vdslLineSCMPhysBandCurrCenterFrequency
      vdslLineSCMPhysBandPerformanceBandId
      vdslLineSCMPhysBandPerformanceBandUsage
      vdslLineSCMPhysBandPerformanceBandSnrMgn
      vdslLineSCMPhysBandPerformanceBandAtn

   Note also that the interface indices in this MIB are maintained
   persistently.  View-based Access Control Model (VACM) data relating
   to these SHOULD be stored persistently as well [RFC3415].








Dodge & Ray                 Standards Track                     [Page 4]

RFC 4069                 VDSL-LINE-EXT-SCM-MIB                  May 2005


3.  Conformance and Compliance

   An SCM based VDSL agent does not have to implement this MIB to be
   compliant with RFC 3728 [RFC3728].  If the SCM VDSL Line Extension
   MIB is implemented then the following group is mandatory:

      -  vdslSCMGroup

4.  Definitions

   VDSL-LINE-EXT-SCM-MIB DEFINITIONS ::= BEGIN

   IMPORTS

   MODULE-IDENTITY,
   OBJECT-TYPE,
   Integer32,
   transmission,
   Unsigned32                      FROM SNMPv2-SMI         -- [RFC2578]
   TEXTUAL-CONVENTION,
   TruthValue,
   RowStatus                       FROM SNMPv2-TC          -- [RFC2579]
   MODULE-COMPLIANCE,
   OBJECT-GROUP                    FROM SNMPv2-CONF        -- [RFC2580]
   ifIndex                         FROM IF-MIB             -- [RFC2863]
   vdslLineConfProfileName         FROM VDSL-LINE-MIB;     -- [RFC3728]

   vdslExtSCMMIB MODULE-IDENTITY
      LAST-UPDATED "200504280000Z" --     April 28, 2005
      ORGANIZATION "ADSLMIB Working Group"
      CONTACT-INFO "WG-email:  adslmib@ietf.org
            Info:      https://www1.ietf.org/mailman/listinfo/adslmib

            Chair:     Mike Sneed
                       Sand Channel Systems
            Postal:    P.O. Box 37324
                       Raleigh NC 27627-732
            Email:     sneedmike@hotmail.com
            Phone:     +1 206 600 7022

            Co-Chair/Co-editor:
                       Bob Ray
                       PESA Switching Systems, Inc.
            Postal:    330-A Wynn Drive
                       Huntsville, AL 35805
                       USA
            Email:     rray@pesa.com
            Phone:     +1 256 726 9200 ext.  142



Dodge & Ray                 Standards Track                     [Page 5]

RFC 4069                 VDSL-LINE-EXT-SCM-MIB                  May 2005


            Co-editor: Menachem Dodge
                       ECI Telecom Ltd.
            Postal:    30 Hasivim St.
                       Petach Tikva 49517,
                       Israel
            Email:     mbdodge@ieee.org
            Phone:     +972 3 926 8421
           "

   DESCRIPTION
      "The VDSL-LINE-MIB found in RFC 3728 defines objects for the
      management of a pair of VDSL transceivers at each end of the VDSL
      line.  The VDSL-LINE-MIB configures and monitors the line code
      independent parameters (TC layer) of the VDSL line.  This MIB
      module is an optional extension of the VDSL-LINE-MIB and defines
      objects for configuration and monitoring of the line code specific
      (LCS) elements (PMD layer) for VDSL lines using SCM coding.  The
      objects in this extension MIB MUST NOT be used for VDSL lines
      using Multiple Carrier Modulation (MCM) line coding.  If an object
      in this extension MIB is referenced by a line which does not use
      SCM, it has no effect on the operation of that line.

      Naming Conventions:

         Vtuc -- VDSL transceiver at near (Central) end of line
         Vtur -- VDSL transceiver at Remote end of line
         Vtu  -- One of either Vtuc or Vtur
         Curr -- Current
         Atn  -- Attenuation
         LCS  -- Line Code Specific
         Max  -- Maximum
         Mgn  -- Margin
         PSD  -- Power Spectral Density
         Rx   -- Receive
         Snr  -- Signal to Noise Ratio
         Tx   -- Transmit

      Copyright (C) The Internet Society (2005).  This version
      of this MIB module is part of RFC 4069: see the RFC
      itself for full legal notices."
              REVISION "200504280000Z" --     April 28, 2005
              DESCRIPTION "Initial version, published as RFC 4069."
          ::= { transmission 228 }

          vdslLineExtSCMMib    OBJECT IDENTIFIER ::= { vdslExtSCMMIB 1 }
          vdslLineExtSCMMibObjects OBJECT IDENTIFIER ::=
                                                 { vdslLineExtSCMMib 1 }
   --



Dodge & Ray                 Standards Track                     [Page 6]

RFC 4069                 VDSL-LINE-EXT-SCM-MIB                  May 2005


   -- textual conventions used in this MIB
   --

   VdslSCMBandId ::= TEXTUAL-CONVENTION
       STATUS       current
       DESCRIPTION
          "This data type is used as the syntax for the VDSL SCM Band
           Identity.  Attributes with this syntax identify the SCM Band
           referred to.  Specified as an INTEGER, the possible values
           are:

           optionalBand (1)  -- the optional Band range [25kHz - 138kHz]
           firstDownstreamBand (2)  -- first Downstream Band
           firstUpstreamBand (3)    -- first Upstream Band
           secondDownstreamBand (4) -- second Downstream Band
           secondUpstreamBand (5)   -- second Upstream Band
           thirdDownstreamBand (6)  -- third Downstream Band
           thirdUpstreamBand (7)    -- third Upstream Band"


       SYNTAX      INTEGER       {  optionalBand (1),
                                    firstDownstreamBand (2),
                                    firstUpstreamBand (3),
                                    secondDownstreamBand (4),
                                    secondUpstreamBand (5),
                                    thirdDownstreamBand (6),
                                    thirdUpstreamBand(7) }

   --
   -- Single carrier modulation (SCM) configuration profile tables
   --

   vdslLineSCMConfProfileBandTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF VdslLineSCMConfProfileBandEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "This table contains transmit band descriptor configuration
           information for a VDSL line.  Each entry in this table
           reflects the configuration for one of possibly many bands
           of a single carrier modulation (SCM) VDSL line.  For each
           profile which is associated with a VDSL line using SCM
           line coding, five entries in this table will exist, one for
           each of the five bands.  Bands which are not in use will be
           marked as unused.  These entries are defined by a manager
           and can be used to configure the VDSL line.  If an entry in





Dodge & Ray                 Standards Track                     [Page 7]

RFC 4069                 VDSL-LINE-EXT-SCM-MIB                  May 2005


           this table is referenced by a line which does not use SCM,
           it has no effect on the operation of that line."
       ::= { vdslLineExtSCMMibObjects 1 }

   vdslLineSCMConfProfileBandEntry OBJECT-TYPE
       SYNTAX       VdslLineSCMConfProfileBandEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "Each entry consists of a list of parameters that
           represents the configuration of a single carrier
           modulation VDSL modem transmit band.

           A default profile with an index of 'DEFVAL', will
           always exist and its parameters will be set to vendor
           specific values, unless otherwise specified in this
           document.

           All read-create objects defined in this MIB module SHOULD be
           stored persistently."

       INDEX { vdslLineConfProfileName,
        vdslLineSCMConfProfileBandId }
       ::= { vdslLineSCMConfProfileBandTable 1 }

   VdslLineSCMConfProfileBandEntry ::=
       SEQUENCE
          {
          vdslLineSCMConfProfileBandId                VdslSCMBandId,
          vdslLineSCMConfProfileBandInUse             TruthValue,
          vdslLineSCMConfProfileBandCenterFrequency   Unsigned32,
          vdslLineSCMConfProfileBandSymbolRate        Unsigned32,
          vdslLineSCMConfProfileBandConstellationSize Unsigned32,
          vdslLineSCMConfProfileBandTransmitPSDLevel  Unsigned32,
          vdslLineSCMConfProfileBandRowStatus         RowStatus
          }

   vdslLineSCMConfProfileBandId OBJECT-TYPE
       SYNTAX      VdslSCMBandId
       MAX-ACCESS  not-accessible
       STATUS  current
       DESCRIPTION
          "The BandId for this entry, which specifies which band
           is being referred to."
       ::= { vdslLineSCMConfProfileBandEntry 1 }






Dodge & Ray                 Standards Track                     [Page 8]

RFC 4069                 VDSL-LINE-EXT-SCM-MIB                  May 2005


   vdslLineSCMConfProfileBandInUse OBJECT-TYPE
       SYNTAX       TruthValue
       MAX-ACCESS   read-create
       STATUS  current
       DESCRIPTION
          "Indicates whether this band is in use.
           If set to True this band is in use."
       ::= { vdslLineSCMConfProfileBandEntry 2 }

   vdslLineSCMConfProfileBandCenterFrequency OBJECT-TYPE
       SYNTAX       Unsigned32
       UNITS        "Hz"
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "Specifies the center frequency in Hz"
       REFERENCE    "T1E1.4/2000-011R3"    -- Part 2, SCM
       ::= { vdslLineSCMConfProfileBandEntry 3 }

   vdslLineSCMConfProfileBandSymbolRate OBJECT-TYPE
       SYNTAX       Unsigned32
       UNITS        "baud"
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The requested symbol rate in baud."
       REFERENCE    "T1E1.4/2000-011R3"    -- Part 2, SCM
       ::= { vdslLineSCMConfProfileBandEntry 4 }

   vdslLineSCMConfProfileBandConstellationSize OBJECT-TYPE
       SYNTAX       Unsigned32 (0..16)
       UNITS        "log2"
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "Specifies the constellation size."
       REFERENCE    "T1E1.4/2000-011R3"    -- Part 2, SCM
       ::= { vdslLineSCMConfProfileBandEntry 5 }













Dodge & Ray                 Standards Track                     [Page 9]

RFC 4069                 VDSL-LINE-EXT-SCM-MIB                  May 2005


   vdslLineSCMConfProfileBandTransmitPSDLevel OBJECT-TYPE
       SYNTAX       Unsigned32
       UNITS        "-0.25 dBm/Hz"
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "The requested transmit power spectral density for the VDSL
           modem.  The Actual value in -0.25 dBm/Hz."
       REFERENCE    "T1E1.4/2000-011R3"    -- Part 2, SCM
       ::= { vdslLineSCMConfProfileBandEntry 6  }

   vdslLineSCMConfProfileBandRowStatus OBJECT-TYPE
       SYNTAX       RowStatus
       MAX-ACCESS   read-create
       STATUS       current
       DESCRIPTION
          "This object is used to create a new row or modify or
           delete an existing row in this table.

           A profile activated by setting this object to `active'.
           When `active' is set, the system will validate the profile.

           None of the columns in this row may be modified while the
           row is in the `active' state.

           Before a profile can be deleted or taken out of
           service, (by setting this object to `destroy' or
           `notInService') it must be first unreferenced
           from all associated lines."

       ::= { vdslLineSCMConfProfileBandEntry 7 }

   --
   -- SCM physical band
   --

   vdslLineSCMPhysBandTable OBJECT-TYPE
       SYNTAX       SEQUENCE OF VdslLineSCMPhysBandEntry
       MAX-ACCESS   not-accessible
       STATUS       current
       DESCRIPTION
          "This table provides one row for each SCM Vtu band.  This
           table is read only as it reflects the current physical
           parameters of each band.  For each ifIndex which is
           associated with a VDSL line using SCM line coding, five
           entries in this table will exist, one for each of the
           five bands.  Bands which are not in use will be marked
           as unused."



Dodge & Ray                 Standards Track                    [Page 10]

RFC 4069                 VDSL-LINE-EXT-SCM-MIB                  May 2005


       ::= { vdslLineExtSCMMibObjects 2 }

   vdslLineSCMPhysBandEntry OBJECT-TYPE
       SYNTAX        VdslLineSCMPhysBandEntry
       MAX-ACCESS    not-accessible
       STATUS        current
       DESCRIPTION
          "An entry in the vdslLineSCMPhysBandTable."
       INDEX { ifIndex,
               vdslLineSCMPhysBandId  }
       ::= { vdslLineSCMPhysBandTable 1 }

   VdslLineSCMPhysBandEntry ::=
       SEQUENCE
           {
           vdslLineSCMPhysBandId                    VdslSCMBandId,
           vdslLineSCMPhysBandInUse                 TruthValue,
           vdslLineSCMPhysBandCurrCenterFrequency   Unsigned32,
           vdslLineSCMPhysBandCurrSymbolRate        Unsigned32,
           vdslLineSCMPhysBandCurrConstellationSize Unsigned32,
           vdslLineSCMPhysBandCurrPSDLevel          Unsigned32,
           vdslLineSCMPhysBandCurrSnrMgn            Integer32,
           vdslLineSCMPhysBandCurrAtn               Unsigned32
           }

   vdslLineSCMPhysBandId OBJECT-TYPE
       SYNTAX      VdslSCMBandId
       MAX-ACCESS  not-accessible
       STATUS  current
       DESCRIPTION
           "The BandId for this entry, which specifies which band
            is being referred to."
       ::= { vdslLineSCMPhysBandEntry 1 }

   vdslLineSCMPhysBandInUse OBJECT-TYPE
       SYNTAX      TruthValue
       MAX-ACCESS  read-only
       STATUS  current
       DESCRIPTION
          "Indicates whether this band is in use.
           If set to True this band is in use."
       ::= { vdslLineSCMPhysBandEntry 2 }









Dodge & Ray                 Standards Track                    [Page 11]

RFC 4069                 VDSL-LINE-EXT-SCM-MIB                  May 2005


   vdslLineSCMPhysBandCurrCenterFrequency OBJECT-TYPE
       SYNTAX       Unsigned32
       UNITS        "Hz"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The current center frequency in Hz for this band."
       REFERENCE    "T1E1.4/2000-011R3"    -- Part 2, SCM
       ::= { vdslLineSCMPhysBandEntry 3 }

   vdslLineSCMPhysBandCurrSymbolRate    OBJECT-TYPE
       SYNTAX       Unsigned32
       UNITS        "baud"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The current value of the symbol rate in baud for this
           band."
      REFERENCE    "T1E1.4/2000-011R3"    -- Part 2, SCM
      ::= { vdslLineSCMPhysBandEntry 4 }

   vdslLineSCMPhysBandCurrConstellationSize OBJECT-TYPE
       SYNTAX       Unsigned32 (0..16)
       UNITS        "log2"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The current constellation size on this band."
       REFERENCE    "T1E1.4/2000-011R3"    -- Part 2, SCM
       ::= { vdslLineSCMPhysBandEntry 5 }

   vdslLineSCMPhysBandCurrPSDLevel    OBJECT-TYPE
       SYNTAX       Unsigned32
       UNITS        "- 0.25 dBm/Hz"
       MAX-ACCESS   read-only
       STATUS       current
       DESCRIPTION
          "The transmit power spectral density for the
           VDSL modem."
       REFERENCE    "T1E1.4/2000-011R3"    -- Part 2, SCM
       ::= { vdslLineSCMPhysBandEntry 6 }










Dodge & Ray                 Standards Track                    [Page 12]

RFC 4069                 VDSL-LINE-EXT-SCM-MIB                  May 2005


   vdslLineSCMPhysBandCurrSnrMgn OBJECT-TYPE
       SYNTAX        Integer32
       UNITS         "0.25 dB"
       MAX-ACCESS    read-only
       STATUS        current
       DESCRIPTION
          "Noise margin as seen by this Vtu and band with respect
           to its received signal in 0.25 dB."
       ::= { vdslLineSCMPhysBandEntry 7 }

   vdslLineSCMPhysBandCurrAtn OBJECT-TYPE
       SYNTAX        Unsigned32 (0..255)
       UNITS         "0.25 dB"
       MAX-ACCESS    read-only
       STATUS        current
       DESCRIPTION
          "Measured difference in the total power transmitted by
           the peer Vtu on this band and the total power received
           by this Vtu on this band in 0.25 dB."
       ::= { vdslLineSCMPhysBandEntry 8 }

   -- conformance information

   vdslLineExtSCMConformance OBJECT IDENTIFIER ::=
                                               { vdslLineExtSCMMib 2 }
   vdslLineExtSCMGroups OBJECT IDENTIFIER ::=
                                       { vdslLineExtSCMConformance 1 }
   vdslLineExtSCMCompliances OBJECT IDENTIFIER ::=
                                       { vdslLineExtSCMConformance 2 }

   vdslLineExtSCMMibCompliance MODULE-COMPLIANCE
       STATUS  current
       DESCRIPTION
          "The compliance statement for SNMP entities which
           manage VDSL interfaces."

       MODULE  -- this module

       MANDATORY-GROUPS
       {
         vdslLineExtSCMGroup
       }

       ::= { vdslLineExtSCMCompliances 1 }







Dodge & Ray                 Standards Track                    [Page 13]

RFC 4069                 VDSL-LINE-EXT-SCM-MIB                  May 2005


   -- units of conformance

   vdslLineExtSCMGroup    OBJECT-GROUP
       OBJECTS
           {
           vdslLineSCMConfProfileBandInUse,
           vdslLineSCMConfProfileBandTransmitPSDLevel,
           vdslLineSCMConfProfileBandSymbolRate,
           vdslLineSCMConfProfileBandConstellationSize,
           vdslLineSCMConfProfileBandCenterFrequency,
           vdslLineSCMConfProfileBandRowStatus,
           vdslLineSCMPhysBandInUse,
           vdslLineSCMPhysBandCurrPSDLevel,
           vdslLineSCMPhysBandCurrSymbolRate,
           vdslLineSCMPhysBandCurrConstellationSize,
           vdslLineSCMPhysBandCurrCenterFrequency,
           vdslLineSCMPhysBandCurrSnrMgn,
           vdslLineSCMPhysBandCurrAtn

           }
       STATUS      current
       DESCRIPTION
          "A collection of objects providing configuration
           information for a VDSL line based upon single carrier
           modulation modem."
       ::= { vdslLineExtSCMGroups 1 }

   END

5.  Acknowledgments

   This document contains many definitions taken from an early version
   of the VDSL MIB [RFC3728].  As such, any credit for the text found
   within should be fully attributed to the authors of that document.

6.  Security Considerations

   There are a number of management objects defined in this MIB module
   with a MAX-ACCESS clause of read-create.  Such objects may be
   considered sensitive or vulnerable in some network environments.  The
   support for SET operations in a non-secure environment without proper
   protection can have a negative effect on network operations.  These
   are the tables and objects and their sensitivity/vulnerability:

      vdslLineSCMConfProfileBandTable
      vdslLineSCMConfProfileBandInUse,
      vdslLineSCMConfProfileBandTransmitPSDLevel,
      vdslLineSCMConfProfileBandSymbolRate,



Dodge & Ray                 Standards Track                    [Page 14]

RFC 4069                 VDSL-LINE-EXT-SCM-MIB                  May 2005


      vdslLineSCMConfProfileBandConstellationSize,
      vdslLineSCMConfProfileBandCenterFrequency,
      vdslLineSCMConfProfileBandRowStatus

   VDSL layer connectivity from the Vtur will permit the subscriber to
   manipulate both the VDSL link directly and the VDSL embedded
   operations channel (EOC) for their own loop.  For example, unchecked
   or unfiltered fluctuations initiated by the subscriber could generate
   sufficient notifications to potentially overwhelm either the
   management interface to the network or the element manager.

   Additionally, allowing write access to configuration data may allow
   an end-user to increase their service levels or affect other end-
   users in either a positive or negative manner.  For this reason, the
   tables and objects listed above should be considered to contain
   sensitive information.

   Some of the readable objects in this MIB module (i.e., objects with a
   MAX-ACCESS other than not-accessible) may be considered sensitive or
   vulnerable in some network environments.  It is thus important to
   control even GET and/or NOTIFY access to these objects and possibly
   to even encrypt the values of these objects when sending them over
   the network via SNMP.  These are the tables and objects and their
   sensitivity/vulnerability:

      vdslLineSCMPhysBandInUse,
      vdslLineSCMPhysBandCurrPSDLevel,
      vdslLineSCMPhysBandCurrSymbolRate,
      vdslLineSCMPhysBandCurrConstellationSize,
      vdslLineSCMPhysBandCurrCenterFrequency,
      vdslLineSCMPhysBandCurrSnrMgn,
      vdslLineSCMPhysBandCurrAtn

   Read access of the physical band parameters may provide knowledge to
   an end-user that would allow malicious behavior, for example the
   application of an intentional interference on one or all of the
   physical bands in use.

   SNMP versions prior to SNMPv3 did not include adequate security.
   Even if the network itself is secure (for example by using IPSec),
   even then, there is no control as to who on the secure network is
   allowed to access and GET/SET (read/change/create/delete) the objects
   in this MIB module.

   It is RECOMMENDED that implementers consider the security features as
   provided by the SNMPv3 framework (see [RFC3410], section 8),
   including full support for the SNMPv3 cryptographic mechanisms (for
   authentication and privacy).



Dodge & Ray                 Standards Track                    [Page 15]

RFC 4069                 VDSL-LINE-EXT-SCM-MIB                  May 2005


   Further, deployment of SNMP versions prior to SNMPv3 is NOT
   RECOMMENDED.  Instead, it is RECOMMENDED to deploy SNMPv3 and to
   enable cryptographic security.  It is then a customer/operator
   responsibility to ensure that the SNMP entity giving access to an
   instance of a MIB module is properly configured to give access to the
   objects only to those principals (users) that have legitimate rights
   to indeed GET or SET (change/create/delete) them.

7.  IANA Considerations

   The IANA has assigned the transmission value 228 to VDSL-LINE-EXT-
   SCM-MIB.

8.  References

8.1.  Normative References

   [DSLFTR57] DSL Forum TR-057, "VDSL Network Element Management",
              February 2003.

   [DSLFWT96] DSL Forum WT-096, "SCM Specific Managed Objects In VDSL
              Network Elements".

   [ETSI2701] ETSI TS 101 270-1 V1.2.1, "Transmission and Multiplexing
              (TM); Access transmission systems on metallic access
              cables; Very high speed Digital Subscriber Line (VDSL);
              Part 1: Functional requirements", October 1999.

   [ETSI2702] ETSI TS 101 270-2 V1.1.1, "Transmission and Multiplexing
              (TM); Access transmission systems on metallic access
              cables; Very high speed Digital Subscriber Line (VDSL);
              Part 1: Transceiver specification", February 2001.

   [ITU9931]  ITU-T G.993.1, "Very-high-speed digital subscriber line
              foundation", November 2001.

   [ITU9971]  ITU-T G.997.1, "Physical layer management for Digital
              Subscriber Line (DSL) Transceivers", July 1999.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2578]  McCloghrie, K., Perkins, D., and J. Schoenwaelder,
              "Structure of Management Information Version 2 (SMIv2)",
              STD 58, RFC 2578, April 1999.






Dodge & Ray                 Standards Track                    [Page 16]

RFC 4069                 VDSL-LINE-EXT-SCM-MIB                  May 2005


   [RFC2579]  McCloghrie, K., Perkins, D., and J. Schoenwaelder,
              "Textual Conventions for SMIv2", STD 58, RFC 2579, April
              1999.

   [RFC2580]  McCloghrie, K., Perkins, D., and J. Schoenwaelder,
              "Conformance Statements for SMIv2", STD 58, RFC 2580,
              April 1999.

   [RFC2863]  McCloghrie, K. and F. Kastenholz, "The Interfaces Group
              MIB", RFC 2863, June 2000.

   [RFC3728]  Ray, B. and R. Abbi, "Definitions of Managed Objects for
              Very High Speed Digital Subscriber Lines (VDSL)", RFC
              3728, February 2004.

   [T1E1311]  ANSI T1E1.4/2001-311, "Very-high-bit-rate Digital
              Subscriber Line (VDSL) Metallic Interface, Part 1:
              Functional Requirements and Common Specification",
              February 2001.

   [T1E1011]  ANSI T1E1.4/2001-011R3, "VDSL Metallic Interface, Part 2:
              Technical Specification for a Single-Carrier Modulation
              (SCM) Transceiver", November 2001.

   [T1E1013]  ANSI T1E1.4/2001-013R4, "VDSL Metallic Interface, Part 3:
              Technical Specification for a Multi-Carrier Modulation
              (MCM) Transceiver", November 2000.

8.2.  Informative References

   [RFC3415]  Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based
              Access Control Model (VACM) for the Simple Network
              Management Protocol (SNMP)", STD 62, RFC 3415, December
              2002.

   [RFC3410]  Case, J., Mundy, R., Partain, D., and B. Stewart,
              "Introduction and Applicability Statements for Internet-
              Standard Management Framework", RFC 3410, December 2002.













Dodge & Ray                 Standards Track                    [Page 17]

RFC 4069                 VDSL-LINE-EXT-SCM-MIB                  May 2005


Authors' Addresses

   Menachem Dodge
   ECI Telecom Ltd.
   30 Hasivim St.
   Petach Tikva 49517,
   Israel

   Phone: +972 3 926 8421
   Fax:   +972 3 928 7342
   EMail: mbdodge@ieee.org


   Bob Ray
   PESA Switching Systems, Inc.
   330-A Wynn Drive
   Huntsville, AL 35805
   USA

   Phone: +1 256 726 9200 ext.  142
   Fax:   +1 256 726 9271
   EMail: rray@pesa.com





























Dodge & Ray                 Standards Track                    [Page 18]

RFC 4069                 VDSL-LINE-EXT-SCM-MIB                  May 2005


Full Copyright Statement

   Copyright (C) The Internet Society (2005).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
   ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
   INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
   INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at ietf-
   ipr@ietf.org.

Acknowledgement

   Funding for the RFC Editor function is currently provided by the
   Internet Society.







Dodge & Ray                 Standards Track                    [Page 19]