RFC6076: Basic Telephony SIP End-to-End Performance Metrics

Download in PDF format Download in text format






Internet Engineering Task Force (IETF)                          D. Malas
Request for Comments: 6076                                     CableLabs
Category: Standards Track                                      A. Morton
ISSN: 2070-1721                                                AT&T Labs
                                                            January 2011


           Basic Telephony SIP End-to-End Performance Metrics

Abstract

   This document defines a set of metrics and their usage to evaluate
   the performance of end-to-end Session Initiation Protocol (SIP) for
   telephony services in both production and testing environments.  The
   purpose of this document is to combine a standard set of common
   metrics, allowing interoperable performance measurements, easing the
   comparison of industry implementations.

Status of This Memo

   This is an Internet Standards Track document.

   This document is a product of the Internet Engineering Task Force
   (IETF).  It represents the consensus of the IETF community.  It has
   received public review and has been approved for publication by the
   Internet Engineering Steering Group (IESG).  Further information on
   Internet Standards is available in Section 2 of RFC 5741.

   Information about the current status of this document, any errata,
   and how to provide feedback on it may be obtained at
   http://www.rfc-editor.org/info/rfc6076.




















Malas & Morton               Standards Track                    [Page 1]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


Copyright Notice

   Copyright (c) 2011 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

   This document may contain material from IETF Documents or IETF
   Contributions published or made publicly available before November
   10, 2008.  The person(s) controlling the copyright in some of this
   material may not have granted the IETF Trust the right to allow
   modifications of such material outside the IETF Standards Process.
   Without obtaining an adequate license from the person(s) controlling
   the copyright in such materials, this document may not be modified
   outside the IETF Standards Process, and derivative works of it may
   not be created outside the IETF Standards Process, except to format
   it for publication as an RFC or to translate it into languages other
   than English.

























Malas & Morton               Standards Track                    [Page 2]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


Table of Contents

   1. Introduction and Scope ..........................................3
   2. Terminology .....................................................4
   3. Time Interval Measurement and Reporting .........................5
   4. SIP Performance Metrics .........................................7
      4.1. Registration Request Delay (RRD) ...........................8
      4.2. Ineffective Registration Attempts (IRAs) ...................9
      4.3. Session Request Delay (SRD) ...............................10
           4.3.1. Successful Session Setup SRD .......................11
           4.3.2. Failed Session Setup SRD ...........................12
      4.4. Session Disconnect Delay (SDD) ............................13
      4.5. Session Duration Time (SDT) ...............................15
           4.5.1. Successful Session Duration SDT ....................15
           4.5.2. Failed Session Completion SDT ......................17
      4.6. Session Establishment Ratio (SER) .........................18
      4.7. Session Establishment Effectiveness Ratio (SEER) ..........19
      4.8. Ineffective Session Attempts (ISAs) .......................20
      4.9. Session Completion Ratio (SCR) ............................21
   5. Additional Considerations ......................................23
      5.1. Metric Correlations .......................................23
      5.2. Back-to-Back User Agent (B2BUA) ...........................23
      5.3. Authorization and Authentication ..........................23
      5.4. Forking ...................................................24
      5.5. Data Collection ...........................................24
      5.6. Testing Documentation .....................................25
   6. Conclusions ....................................................25
   7. Security Considerations ........................................25
   8. Contributors ...................................................26
   9. Acknowledgements ...............................................26
   10. References ....................................................26
      10.1. Normative References .....................................26
      10.2. Informative References ...................................27

1.  Introduction and Scope

   SIP has become a widely used standard among many service providers,
   vendors, and end users in the telecommunications industry.  Although
   there are many different standards for measuring the performance of
   telephony signaling protocols, such as Signaling System 7 (SS7), none
   of the metrics specifically address SIP.

   The scope of this document is limited to the definitions of a
   standard set of metrics for measuring and reporting SIP performance
   from an end-to-end perspective in a telephony environment.  The
   metrics introduce a common foundation for understanding and
   quantifying performance expectations between service providers,
   vendors, and the users of services based on SIP.  The intended



Malas & Morton               Standards Track                    [Page 3]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


   audience for this document can be found among network operators, who
   often collect information on the responsiveness of the network to
   customer requests for services.

   Measurements of the metrics described in this document are affected
   by variables external to SIP.  The following is a non-exhaustive list
   of examples:

   o  Network connectivity

   o  Switch and router performance

   o  Server processes and hardware performance

   This document defines a list of pertinent metrics for varying aspects
   of a telephony environment.  They may be used individually or as a
   set based on the usage of SIP within the context of a given
   telecommunications service.

   The metrics defined in this document DO NOT take into consideration
   the impairment or failure of actual application processing of a
   request or response.  The metrics do not distinguish application
   processing time from other sources of delay, such as packet transfer
   delay.

   Metrics designed to quantify single device application processing
   performance are beyond the scope of this document.

   This document does not provide any numerical objectives or acceptance
   threshold values for the SIP performance metrics defined below, as
   these items are beyond the scope of IETF activities, in general.

   The metrics defined in this document are applicable in scenarios
   where the SIP messages launched (into a network under test) are
   dedicated messages for testing purposes, or where the messages are
   user-initiated and a portion of the live is traffic present.  These
   two scenarios are sometimes referred to as active and passive
   measurement, respectively.

2.  Terminology

   The following terms and conventions will be used throughout this
   document:

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [RFC2119].




Malas & Morton               Standards Track                    [Page 4]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


   End-to-End - This is described as two or more elements utilized for
   initiating a request, receiving the request, and responding to the
   request.  It encompasses elements as necessary to be involved in a
   session dialog between the originating user agent client (UAC),
   destination user agent server (UAS), and any interim proxies (may
   also include back-to-back user agents (B2BUAs)).  This may be
   relative to a single operator's set of elements or may extend to
   encompass all elements (if beyond a single operator's network)
   associated with a session.

   Session - As described in RFC 3261 [RFC3261], SIP is used primarily
   to request, create, and conclude sessions.  "These sessions include
   Internet telephone calls, multimedia distribution, and multimedia
   conferences".  The metrics within this document measure the
   performance associated with the SIP dialogs necessary to establish
   these sessions; therefore, they are titled as Session Request Delay,
   Session Disconnect Delay, etc.  Although the titles of many of the
   metrics include this term, they are specifically measuring the
   signaling aspects only.  Each session is identified by a unique
   "Call-ID", "To", and "From" header field tag.

   Session Establishment - Session establishment occurs when a 200 OK
   response from the target UA has been received, in response to the
   originating UA's INVITE setup request, indicating the session setup
   request was successful.

   Session Setup - As referenced within the sub-sections of Section 4.2
   in this document, session setup is the set of messages and included
   parameters directly related to the process of a UA requesting to
   establish a session with a corresponding UA.  This is also described
   as a set of steps in order to establish "ringing" [RFC3261].

3.  Time Interval Measurement and Reporting

   Many of the metrics defined in this memo utilize a clock to assess
   the time interval between two events.  This section defines time-
   related terms and reporting requirements.

   t1 - start time

   This is the time instant (when a request is sent) that begins a
   continuous time interval.  t1 occurs when the designated request has
   been processed by the SIP application and the first bit of the
   request packet has been sent from the UA or proxy (and is externally
   observable at some logical or physical interface).






Malas & Morton               Standards Track                    [Page 5]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


   t1 represents the time at which each request-response test begins,
   and SHALL be used to designate the time of day when a particular
   measurement was conducted (e.g., the Session Request Delay at "t1"
   (at some specific UA interface) was measured to be X ms).

   t4 - end time

   This is the time instant that concludes the continuous time interval
   begun when the related request is sent.  t4 occurs when the last bit
   of the designated response is received by the SIP application at the
   requesting device (and is externally observable at some logical or
   physical interface).

      Note: The designations t2 and t3 are reserved for future use at
      another interface involved in satisfying a request.

   Section 10.1 of [RFC2330] describes time-related issues in
   measurements, and defines the errors that can be attributed to the
   clocks themselves.  These definitions are used in the material below.

   Time-of-Day Accuracy

   As defined above, t1 is associated with the start of a request and
   also serves as the time-of-day stamp associated with a single
   specific measurement.  The clock offset [RFC2330] is the difference
   between t1 and a recognized primary source of time, such as UTC
   (offset = t1 - UTC).

   When measurement results will be correlated with other results or
   information using time-of-day stamps, then the time clock that
   supplies t1 SHOULD be synchronized to a primary time source, to
   minimize the clock's offset.  The clocks used at the different
   measurement points SHOULD be synchronized to each other, to minimize
   the relative offset (as defined in RFC2330).  The clock's offset and
   the relative offset MUST be reported with each measurement.

   Time Interval Accuracy

   The accuracy of the t4-t1 interval is also critical to maintain and
   report.  The difference between a clock's offsets at t1 and t4 is one
   source of error for the measurement and is associated with the
   clock's skew [RFC2330].









Malas & Morton               Standards Track                    [Page 6]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


   A stable and reasonably accurate clock is needed to make the time
   interval measurements required by this memo.  This source of error
   SHOULD be constrained to less than +/- 1 ms, implying 1-part-per-1000
   frequency accuracy for a 1-second interval.  This implies that
   greater stability is required as the length of the t4-t1 increases,
   in order to constrain the error to be less than +/- 1 ms.

   There are other important aspects of clock operation:

   1.  Synchronization protocols require some ability to make
       adjustments to the local clock.  However, these adjustments
       (clock steps or slewing) can cause large errors if they occur
       during the t1 to t4 measurement interval.  Clock correction
       SHOULD be suspended during a t1 to t4 measurement interval,
       unless the time interval accuracy requirement above will be met.
       Alternatively, a measurement SHOULD NOT be performed during clock
       correction, unless the time interval accuracy requirement above
       will be met.

   2.  If a free-running clock is used to make the time interval
       measurement, then the time of day reported with the measurement
       (which is normally timestamp t1) SHOULD be derived from a
       different clock that meets the time-of-day accuracy requirements
       described above.

   The physical operation of reading time from a clock may be
   constrained by the delay to service the interrupt.  Therefore, if the
   accuracy of the time stamp read at t1 or t4 includes the interrupt
   delay, this source of error SHOULD be known and included in the error
   assessment.

4.  SIP Performance Metrics

   In regard to all of the following metrics, t1 begins with the first
   associated SIP message sent by either UA, and is not reset if the UA
   must retransmit the same message, within the same transaction,
   multiple times.  The first associated SIP message indicates the t1
   associated with the user or application expectation relative to the
   request.

   Some metrics are calculated using messages from different
   transactions in order to measure across actions such as redirection
   and failure recovery.  The end time is typically based on a
   successful end-to-end provisional response, a successful final
   response, or a failure final response for which there is no recovery.
   The individual metrics detail which message to base the end time on.





Malas & Morton               Standards Track                    [Page 7]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


   The authentication method used to establish the SIP dialog will
   change the message exchanges.  The example message exchanges used do
   not attempt to describe all of the various authentication types.
   Since authentication is frequently used, SIP Digest authentication
   was used for example purposes.

   In regard to all of the metrics, the accuracy and granularity of the
   output values are related to the accuracy and granularity of the
   input values.  Some of the metrics below are defined by a ratio.
   When the denominator of this ratio is 0, the metric is undefined.

   While these metrics do not specify the sample size, this should be
   taken into consideration.  These metrics will provide a better
   indication of performance with larger sample sets.  For example, some
   SIP Service Providers (SSPs) [RFC5486] may choose to collect input
   over an hourly, daily, weekly, or monthly timeframe, while another
   SSP may choose to perform metric calculations over a varying set of
   SIP dialogs.

4.1.  Registration Request Delay (RRD)

   Registration Request Delay (RRD) is a measurement of the delay in
   responding to a UA REGISTER request.  RRD SHALL be measured and
   reported only for successful REGISTER requests, while Ineffective
   Registration Attempts (Section 4.2) SHALL be reported for failures.
   This metric is measured at the originating UA.  The output value of
   this metric is numerical and SHOULD be stated in units of
   milliseconds.  The RRD is calculated using the following formula:

      RRD = Time of Final Response - Time of REGISTER Request

   In a successful registration attempt, RRD is defined as the time
   interval from when the first bit of the initial REGISTER message
   containing the necessary information is passed by the originating UA
   to the intended registrar, until the last bit of the 200 OK is
   received indicating the registration attempt has completed
   successfully.  This dialog includes an expected authentication
   challenge prior to receiving the 200 OK as described in the following
   registration flow examples.

   The following message exchange provides an example of identifiable
   events necessary for inputs in calculating RRD during a successful
   registration completion:








Malas & Morton               Standards Track                    [Page 8]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


                  UA1                 Registrar
                   |                      |
                   |REGISTER              |
            t1---->|--------------------->|
               /\  |                   401|
               ||  |<---------------------|
              RRD  |REGISTER              |
               ||  |--------------------->|
               \/  |                   200|
            t4---->|<---------------------|
                   |                      |

      Note: Networks with elements using primarily Digest authentication
      will exhibit different RRD characteristics than networks with
      elements primarily using other authentication mechanisms (such as
      Identity).  Operators monitoring RRD in networks with a mixture of
      authentication schemes should take note that the RRD measurements
      will likely have a multimodal distribution.

4.2.  Ineffective Registration Attempts (IRAs)

   Ineffective registration attempts are utilized to detect failures or
   impairments causing the inability of a registrar to receive a UA
   REGISTER request.  This metric is measured at the originating UA.
   The output value of this metric is numerical and SHOULD be reported
   as a percentage of registration attempts.

   This metric is calculated as a percentage of total REGISTER requests.
   The IRA percentage is calculated using the following formula:

                          # of IRAs
        IRA % = ----------------------------- x 100
                 Total # of REGISTER Requests

   A failed registration attempt is defined as a final failure response
   to the initial REGISTER request.  It usually indicates a failure
   received from the destination registrar or interim proxies, or
   failure due to a timeout of the REGISTER request at the originating
   UA.  A failure response is described as a 4XX (excluding 401, 402,
   and 407 non-failure challenge response codes), 5XX, or possible 6XX
   message.  A timeout failure is identified by the Timer F expiring.
   IRAs may be used to detect problems in downstream signaling
   functions, which may be impairing the REGISTER message from reaching
   the intended registrar; or, it may indicate a registrar has become
   overloaded and is unable to respond to the request.






Malas & Morton               Standards Track                    [Page 9]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


   The following message exchange provides a timeout example of an
   identifiable event necessary for input as a failed registration
   attempt:

                  UA1                Registrar
                   |                      |
                   |REGISTER              |
                   |--------------------->|
                   |REGISTER              |
                   |--------------------->|
                   |REGISTER              |
                   |--------------------->|
                   |                      |
      Failure ---->|***Timer F Expires    |
                   |                      |

   In the previous message exchange, UA1 retries a REGISTER request
   multiple times before the timer expires, indicating the failure.
   Only the first REGISTER request MUST be used for input to the
   calculation and an IRA.  Subsequent REGISTER retries are identified
   by the same transaction identifier (the same topmost Via header field
   branch parameter value) and MUST be ignored for purposes of metric
   calculation.  This ensures an accurate representation of the metric
   output.

   The following message exchange provides a registrar servicing failure
   example of an identifiable event necessary for input as a failed
   registration attempt:

                  UA1                Registrar
                   |                      |
                   |REGISTER              |
                   |--------------------->|
                   |                      |
                   |                      |
                   |                      |
                   |                      |
                   |                   503|
      Failure ---->|<---------------------|
                   |                      |

4.3.  Session Request Delay (SRD)

   Session Request Delay (SRD) is utilized to detect failures or
   impairments causing delays in responding to a UA session request.
   SRD is measured for both successful and failed session setup requests
   as this metric usually relates to a user experience; however, SRD for
   session requests ending in a failure MUST NOT be combined in the same



Malas & Morton               Standards Track                   [Page 10]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


   result with successful requests.  The duration associated with
   success and failure responses will likely vary substantially, and the
   desired output time associated with each will be significantly
   different in many cases.  This metric is similar to Post-Selection
   Delay defined in [E.721], and it is measured at the originating UA
   only.  The output value of this metric MUST indicate whether the
   output is for successful or failed session requests and SHOULD be
   stated in units of seconds.  The SRD is calculated using the
   following formula:

      SRD = Time of Status Indicative Response - Time of INVITE

4.3.1.  Successful Session Setup SRD

   In a successful request attempt, SRD is defined as the time interval
   from when the first bit of the initial INVITE message containing the
   necessary information is sent by the originating user agent to the
   intended mediation or destination agent, until the last bit of the
   first provisional response is received indicating an audible or
   visual status of the initial session setup request.  (Note: In some
   cases, the initial INVITE may be forked.  Section 5.4 provides
   information for consideration on forking.)  In SIP, the message
   indicating status would be a non-100 Trying provisional message
   received in response to an INVITE request.  In some cases, a non-100
   Trying provisional message is not received, but rather a 200 message
   is received as the first status message instead.  In these
   situations, the 200 message would be used to calculate the interval.
   In most circumstances, this metric relies on receiving a non-100
   Trying message.  The use of the Provisional Response ACKnowledgement
   (PRACK) method [RFC3262] MAY improve the quality and consistency of
   the results.

   The following message exchange provides an example of identifiable
   events necessary for inputs in calculating SRD during a successful
   session setup request without a redirect (i.e., 3XX message):

                  UA1                    UA2
                   |                      |
                   |INVITE                |
            t1---->|--------------------->|
               /\  |                      |
               ||  |                      |
              SRD  |                      |
               ||  |                      |
               \/  |                   180|
            t4---->|<---------------------|
                   |                      |




Malas & Morton               Standards Track                   [Page 11]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


   The following message exchange provides an example of identifiable
   events necessary for inputs in calculating SRD during a successful
   session setup with a redirect (e.g., 302 Moved Temporarily):

                  UA1             Redirect Server              UA2
                   |                      |                     |
                   |INVITE                |                     |
            t1---->|--------------------->|                     |
               /\  |                   302|                     |
               ||  |<---------------------|                     |
               ||  |ACK                   |                     |
              SRD  |--------------------->|                     |
               ||  |INVITE                                      |
               ||  |------------------------------------------->|
               \/  |                                         180|
            t4---->|<-------------------------------------------|

4.3.2.  Failed Session Setup SRD

   In a failed request attempt, SRD is defined as the time interval from
   when the first bit of the initial INVITE message containing the
   necessary information is sent by the originating agent or user to the
   intended mediation or destination agent, until the last bit of the
   first provisional response or a failure indication response.  A
   failure response is described as a 4XX (excluding 401, 402, and 407
   non-failure challenge response codes), 5XX, or possible 6XX message.
   A change in the metric output might indicate problems in downstream
   signaling functions, which may be impairing the INVITE message from
   reaching the intended UA or may indicate changes in end-point
   behavior.  While this metric calculates the delay associated with a
   failed session request, the metric Ineffective Session Attempts
   (Section 4.8) is used for calculating a ratio of session attempt
   failures.

   The following message exchange provides an example of identifiable
   events necessary for inputs in calculating SRD during a failed
   session setup attempt without a redirect (i.e., 3XX message):














Malas & Morton               Standards Track                   [Page 12]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


                  UA1                    UA2
                   |                      |
                   |INVITE                |
            t1---->|--------------------->|
               /\  |                      |
               ||  |                      |
              SRD  |                      |
               ||  |                      |
               \/  |                   480|
            t4---->|<---------------------|
                   |                      |

   The following message exchange provides an example of identifiable
   events necessary for inputs in calculating SRD during a failed
   session setup attempt with a redirect (e.g., 302 Moved Temporarily):

                  UA1             Redirect Server              UA2
                   |                      |                     |
                   |INVITE                |                     |
            t1---->|--------------------->|                     |
               /\  |                   302|                     |
               ||  |<---------------------|                     |
               ||  |ACK                   |                     |
              SRD  |--------------------->|                     |
               ||  |INVITE                                      |
               ||  |------------------------------------------->|
               \/  |                                         480|
            t4---->|<-------------------------------------------|

4.4.  Session Disconnect Delay (SDD)

   This metric is utilized to detect failures or impairments delaying
   the time necessary to end a session.  SDD is measured for both
   successful and failed session disconnects; however, SDD for session
   disconnects ending in a failure MUST NOT be combined in the same
   result with successful disconnects.  The duration associated with
   success and failure results will likely vary substantially, and the
   desired output time associated with each will be significantly
   different in many cases.  It can be measured from either end-point UA
   involved in the SIP dialog.  The output value of this metric is
   numerical and SHOULD be stated in units of milliseconds.  The SDD is
   calculated using the following formula:

      SDD = Time of 2XX or Timeout - Time of Completion Message (BYE)

   SDD is defined as the interval between the first bit of the sent
   session completion message, such as a BYE, and the last bit of the
   subsequently received 2XX response.  In some cases, a recoverable



Malas & Morton               Standards Track                   [Page 13]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


   error response, such as a 503 Retry-After, may be received.  In such
   situations, these responses should not be used as the end time for
   this metric calculation.  Instead, the successful (2XX) response
   related to the recovery message is used.  The following message
   exchanges provide an example of identifiable events necessary for
   inputs in calculating SDD during a successful session completion:

   Measuring SDD at the originating UA (UA1) -

                  UA1                    UA2
                   |                      |
                   |INVITE                |
                   |--------------------->|
                   |                   180|
                   |<---------------------|
                   |                   200|
                   |<---------------------|
                   |ACK                   |
                   |--------------------->|
                   |BYE                   |
            t1---->|--------------------->|
               /\  |                      |
               ||  |                      |
              SDD  |                      |
               ||  |                      |
               \/  |                   200|
            t4---->|<---------------------|

   Measuring SDD at the target UA (UA2) -

                  UA1                    UA2
                   |                      |
                   |INVITE                |
                   |--------------------->|
                   |                   180|
                   |<---------------------|
                   |                   200|
                   |<---------------------|
                   |ACK                   |
                   |--------------------->|
                   |                   BYE|
                   |<---------------------|<----t1
                   |                      |  /\
                   |                      |  ||
                   |                      | SDD
                   |                      |  ||
                   |200                   |  \/
                   |--------------------->|<----t4



Malas & Morton               Standards Track                   [Page 14]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


   In some cases, no response is received after a session completion
   message is sent and potentially retried.  In this case, the
   completion message, such as a BYE, results in a Timer F expiration.
   Sessions ending in this manner SHOULD be excluded from the metric
   calculation.

4.5.  Session Duration Time (SDT)

   This metric is used to detect problems (e.g., poor audio quality)
   causing short session durations.  SDT is measured for both successful
   and failed session completions.  It can be measured from either end-
   point UA involved in the SIP dialog.  This metric is similar to Call
   Hold Time, and it is traditionally calculated as Average Call Hold
   Time (ACHT) in telephony applications of SIP.  The output value of
   this metric is numerical and SHOULD be stated in units of seconds.
   The SDT is calculated using the following formula:

      SDT = Time of BYE or Timeout - Time of 200 OK response to INVITE

   This metric does not calculate the duration of sessions leveraging
   early media.  For example, some automated response systems only use
   early media by responding with a SIP 183 Session Progress message
   with the Session Description Protocol (SDP) connecting the
   originating UA with the automated message.  Usually, in these
   sessions the originating UA never receives a 200 OK, and the message
   exchange ends with the originating UA sending a CANCEL.

4.5.1.  Successful Session Duration SDT

   In a successful session completion, SDT is calculated as an average
   and is defined as the duration of a dialog defined by the interval
   between receipt of the first bit of a 200 OK response to an INVITE,
   and receipt of the last bit of an associated BYE message indicating
   dialog completion.  Retransmissions of the 200 OK and ACK messages
   due to network impairments do not reset the metric timers.

   The following message exchanges provide an example of identifiable
   events necessary for inputs in calculating SDT during a successful
   session completion.  (The message exchanges are changed between the
   originating and target UAs to provide varying examples.):











Malas & Morton               Standards Track                   [Page 15]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


   Measuring SDT at the originating UA (UA1) -

                  UA1                    UA2
                   |                      |
                   |INVITE                |
                   |--------------------->|
                   |                   180|
                   |<---------------------|
                   |                   200|
            t1---->|<---------------------|
               /\  |ACK                   |
               ||  |--------------------->|
               ||  |                      |
              SDT  |                      |
               ||  |                      |
               ||  |                      |
               \/  |                   BYE|
            t4---->|<---------------------|
                   |                      |

   When measuring SDT at the target UA (UA2), it is defined by the
   interval between sending the first bit of a 200 OK response to an
   INVITE, and receipt of the last bit of an associated BYE message
   indicating dialog completion.  If UA2 initiates the BYE, then it is
   defined by the interval between sending the first bit of a 200 OK
   response to an INVITE, and sending the first bit of an associated BYE
   message indicating dialog completion.  This is illustrated in the
   following example message exchange:

                  UA1                    UA2
                   |                      |
                   |INVITE                |
                   |--------------------->|
                   |                   180|
                   |<---------------------|
                   |                   200|
                   |<---------------------|<----t1
                   |ACK                   |  /\
                   |--------------------->|  ||
                   |                      |  ||
                   |                      |  SDT
                   |                      |  ||
                   |                      |  ||
                   |                   BYE|  \/
                   |<---------------------|<----t4
                   |                      |





Malas & Morton               Standards Track                   [Page 16]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


   (In these two examples, t1 is the same even if either UA receives the
   BYE instead of sending it.)

4.5.2.  Failed Session Completion SDT

   In some cases, no response is received after a session completion
   message is sent and potentially retried.  In this case, SDT is
   defined as the interval between receiving the first bit of a 200 OK
   response to an INVITE, and the resulting Timer F expiration.  The
   following message exchanges provide an example of identifiable events
   necessary for inputs in calculating SDT during a failed session
   completion attempt:

   Measuring SDT at the originating UA (UA1) -

                  UA1                    UA2
                   |                      |
                   |INVITE                |
                   |--------------------->|
                   |                   180|
                   |<---------------------|
                   |                   200|
            t1---->|<---------------------|
               /\  |ACK                   |
               ||  |--------------------->|
               ||  |BYE                   |
              SDT  |--------------------->|
               ||  |BYE                   |
               ||  |--------------------->|
               \/  |                      |
            t4---->|***Timer F Expires    |

   When measuring SDT at UA2, SDT is defined as the interval between
   sending the first bit of a 200 OK response to an INVITE, and the
   resulting Timer F expiration.  This is illustrated in the following
   example message exchange:















Malas & Morton               Standards Track                   [Page 17]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


                  UA1                    UA2
                   |                      |
                   |INVITE                |
                   |--------------------->|
                   |                   180|
                   |<---------------------|
                   |                   200|
                   |<---------------------|<----t1
                   |                   ACK|  /\
                   |--------------------->|  ||
                   |                   BYE|  ||
                   |<---------------------|  SDT
                   |                   BYE|  ||
                   |<---------------------|  ||
                   |                      |  \/
                   |    Timer F Expires***|<----t4

   Note that in the presence of message loss and retransmission, the
   value of this metric measured at UA1 may differ from the value
   measured at UA2 up to the value of Timer F.

4.6.  Session Establishment Ratio (SER)

   This metric is used to detect the ability of a terminating UA or
   downstream proxy to successfully establish sessions per new session
   INVITE requests.  SER is defined as the ratio of the number of new
   session INVITE requests resulting in a 200 OK response, to the total
   number of attempted INVITE requests less INVITE requests resulting in
   a 3XX response.  This metric is similar to the Answer Seizure Ratio
   (ASR) defined in [E.411].  It is measured at the originating UA only.
   The output value of this metric is numerical and SHOULD be adjusted
   to indicate a percentage of successfully established sessions.  The
   SER is calculated using the following formula:

                # of INVITE Requests w/ associated 200 OK
   SER = --------------------------------------------------------- x 100
             (Total # of INVITE Requests) -
                       (# of INVITE Requests w/ 3XX Response)

   The following message exchange provides an example of identifiable
   events necessary for inputs in determining session establishment as
   described above:









Malas & Morton               Standards Track                   [Page 18]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


                           UA1                 UA2
                            |                   |
                            |INVITE             |
               +----------->|------------------>|
               |            |                180|
               |            |<------------------|
      Session Established   |                   |
               |            |                   |
               |            |                200|
               +----------->|<------------------|
                            |                   |

   The following is an example message exchange including a SIP 302
   Redirect response.

                            UA1                 UA2                 UA3
                             |                   |                   |
                             |INVITE             |                   |
                +----------->|------------------>|                   |
                |            |                   |                   |
      INVITE w/ 3XX Response |                   |                   |
                |            |                302|                   |
                +----------->|<------------------|                   |
                             |                   |                   |
                             |INVITE                                 |
                +----------->|-------------------------------------->|
                |            |                                       |
                |            |                                    180|
       Session Established   |<--------------------------------------|
                |            |                                       |
                |            |                                    200|
                +----------->|<--------------------------------------|
                             |                                       |

4.7.  Session Establishment Effectiveness Ratio (SEER)

   This metric is complimentary to SER, but is intended to exclude the
   potential effects of an individual user of the target UA from the
   metric.  SEER is defined as the ratio of the number of INVITE
   requests resulting in a 200 OK response and INVITE requests resulting
   in a 480, 486, 600, or 603; to the total number of attempted INVITE
   requests less INVITE requests resulting in a 3XX response.  The
   response codes 480, 486, 600, and 603 were chosen because they
   clearly indicate the effect of an individual user of the UA.  It is
   possible an individual user could cause a negative effect on the UA.
   For example, they may have misconfigured the UA, causing a response
   code not directly related to an SSP, but this cannot be easily
   determined from an intermediary B2BUA somewhere between the



Malas & Morton               Standards Track                   [Page 19]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


   originating and terminating UAs.  With this in consideration,
   response codes such as 401, 407, and 420 (not an exhaustive list)
   were not included in the numerator of the metric.  This metric is
   similar to the Network Effectiveness Ratio (NER) defined in [E.411].
   It is measured at the originating UA only.  The output value of this
   metric is numerical and SHOULD be adjusted to indicate a percentage
   of successfully established sessions less common UAS failures.

   The SEER is calculated using the following formula:

   SEER =

    # of INVITE Requests w/ associated 200, 480, 486, 600, or 603
    ------------------------------------------------------------- x 100
            (Total # of INVITE Requests) -
                      (# of INVITE Requests w/ 3XX Response)

   Reference the example flows in Section 4.6.

4.8.  Ineffective Session Attempts (ISAs)

   Ineffective session attempts occur when a proxy or agent internally
   releases a setup request with a failed or overloaded condition.  This
   metric is similar to Ineffective Machine Attempts (IMAs) in telephony
   applications of SIP, and was adopted from Telcordia GR-512-CORE
   [GR-512].  The output value of this metric is numerical and SHOULD be
   adjusted to indicate a percentage of ineffective session attempts.
   The following failure responses provide a guideline for this
   criterion:

   o  408 Request Timeout

   o  500 Server Internal Error

   o  503 Service Unavailable

   o  504 Server Time-out

   This set was derived in a similar manner as described in Section 4.7.
   In addition, 408 failure responses may indicate an overloaded state
   with a downstream element; however, there are situations other than
   overload that may cause an increase in 408 responses.

   This metric is calculated as a percentage of total session setup
   requests.  The ISA percentage is calculated using the following
   formula:





Malas & Morton               Standards Track                   [Page 20]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


                            # of ISAs
          ISA % = ----------------------------- x 100
                   Total # of Session Requests

   The following dialog [RFC3665] provides an example describing message
   exchanges of an ineffective session attempt:

          UA1           Proxy 1          Proxy 2             UA2
           |                |                |                |
           |INVITE          |                |                |
           |--------------->|                |                |
           |             407|                |                |
           |<---------------|                |                |
           |ACK             |                |                |
           |--------------->|                |                |
           |INVITE          |                |                |
           |--------------->|INVITE          |                |
           |             100|--------------->|INVITE          |
           |<---------------|             100|--------------->|
           |                |<---------------|                |
           |                |                |INVITE          |
           |                |                |--------------->|
           |                |                |                |
           |                |                |INVITE          |
           |                |                |--------------->|
           |                |                |                |
           |                |             408|                |
           |             408|<---------------|                |
           |<---------------|ACK             |                |
           |                |--------------->|                |
           |ACK             |                |                |
           |--------------->|                |                |

4.9.  Session Completion Ratio (SCR)

   A session completion is defined as a SIP dialog, which completes
   without failing due to a lack of response from an intended proxy or
   UA.  This metric is similar to the Call Completion Ratio (CCR) in
   telephony applications of SIP.  The output value of this metric is
   numerical and SHOULD be adjusted to indicate a percentage of
   successfully completed sessions.

   This metric is calculated as a percentage of total sessions completed
   successfully.  The SCR percentage is calculated using the following
   formula:






Malas & Morton               Standards Track                   [Page 21]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


                   # of Successfully Completed Sessions
         SCR % = --------------------------------------- x 100
                        Total # of Session Requests

   The following dialog [RFC3665] provides an example describing the
   necessary message exchanges of a successful session completion:

          UA1           Proxy 1          Proxy 2             UA2
           |                |                |                |
           |INVITE          |                |                |
           |--------------->|                |                |
           |             407|                |                |
           |<---------------|                |                |
           |ACK             |                |                |
           |--------------->|                |                |
           |INVITE          |                |                |
           |--------------->|INVITE          |                |
           |             100|--------------->|INVITE          |
           |<---------------|             100|--------------->|
           |                |<---------------|                |
           |                |                |             180|
           |                |            180 |<---------------|
           |             180|<---------------|                |
           |<---------------|                |             200|
           |                |             200|<---------------|
           |             200|<---------------|                |
           |<---------------|                |                |
           |ACK             |                |                |
           |--------------->|ACK             |                |
           |                |--------------->|ACK             |
           |                |                |--------------->|
           |                Both Way RTP Media                |
           |<================================================>|
           |                |                |             BYE|
           |                |             BYE|<---------------|
           |             BYE|<---------------|                |
           |<---------------|                |                |
           |200             |                |                |
           |--------------->|200             |                |
           |                |--------------->|200             |
           |                |                |--------------->|
           |                |                |                |









Malas & Morton               Standards Track                   [Page 22]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


5.  Additional Considerations

5.1.  Metric Correlations

   These metrics may be used to determine the performance of a domain
   and/or user.  The following is an example subset of dimensions for
   providing further granularity per metric:

   o  To "user"

   o  From "user"

   o  Bi-direction "user"

   o  To "domain"

   o  From "domain"

   o  Bi-direction "domain"

5.2.  Back-to-Back User Agent (B2BUA)

   A B2BUA may impact the ability to collect these metrics with an end-
   to-end perspective.  It is necessary to realize that a B2BUA may act
   as an originating UAC and terminating UAS, or it may act as a proxy.
   In some cases, it may be necessary to consider information collected
   from both sides of the B2BUA in order to determine the end-to-end
   perspective.  In other cases, the B2BUA may act simply as a proxy
   allowing data to be derived as necessary for the input into any of
   the listed calculations.

5.3.  Authorization and Authentication

   During the process of setting up a SIP dialog, various authentication
   methods may be utilized.  These authentication methods will add to
   the duration as measured by the metrics, and the length of time will
   vary based on those methods.  The failures of these authentication
   methods will also be captured by these metrics, since SIP is
   ultimately used to indicate the success or failure of the
   authorization and/or authentication attempt.  The metrics in
   Section 3 are inclusive of the duration associated with this process,
   even if the method is external to SIP.  This was included
   purposefully, due to its inherent impact on the protocol and the
   subsequent SIP dialogs.







Malas & Morton               Standards Track                   [Page 23]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


5.4.  Forking

   Forking SHOULD be considered when determining the messages associated
   with the input values for the described metrics.  If all of the
   forked dialogs were used in the metric calculations, the numbers
   would skew dramatically.  There are two different points of forking,
   and each MUST be considered.  First, forking may occur at a proxy
   downstream from the UA that is being used for metric input values.
   The downstream proxy is responsible for forking a message.  Then,
   this proxy will send provisional (e.g., 180) messages received from
   the requests and send the accepted (e.g., 200) response to the UA.

   Second, in the cases where the originating UA or proxy is forking the
   messages, then it MUST parse the message exchanges necessary for
   input into the metrics.  For example, it MAY utilize the first INVITE
   or set of INVITE messages sent and the first accepted 200 OK.  Tags
   will identify this dialog as distinct from the other 200 OK
   responses, which are acknowledged, and an immediate BYE is sent.  The
   application responsible for capturing and/or understanding the input
   values MUST utilize these tags to distinguish between dialog
   requests.

   Note that if an INVITE is forked before reaching its destination,
   multiple early dialogs are likely, and multiple confirmed dialogs are
   possible (though unlikely).  When this occurs, an SRD measurement
   should be taken for each dialog that is created (early or confirmed).

5.5.  Data Collection

   The input necessary for these calculations may be collected in a
   number of different manners.  It may be collected or retrieved from
   call detail records (CDRs) or raw signaling information generated by
   a proxy or UA.  When using records, time synchronization MUST be
   considered between applicable elements.

   If these metrics are calculated at individual elements (such as
   proxies or endpoints) instead of by a centralized management system,
   and the individual elements use different measurement sample sizes,
   then the metrics reported for the same event at those elements may
   differ significantly.

   The information may also be transmitted through the use of network
   management protocols like the Simple Network Management Protocol
   (SNMP) and via future extensions to the SIP Management Information
   Base (MIB) modules [RFC4780], or through a potential undefined new
   performance metric event package [RFC3265] retrieved via SUBSCRIBE
   requests.




Malas & Morton               Standards Track                   [Page 24]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


   Data may be collected for a sample of calls or all calls, and may
   also be derived from test call scenarios.  These metrics are flexible
   based on the needs of the application.

   For consistency in calculation of the metrics, elements should expect
   to reveal event inputs for use by a centralized management system,
   which would calculate the metrics based on a varying set sample size
   of inputs received from elements compliant with this specification.

5.6.  Testing Documentation

   In some cases, these metrics will be used to provide output values to
   signify the performance level of a specific SIP-based element.  When
   using these metrics in a test environment, the environment MUST be
   accurately documented for the purposes of replicating any output
   values in future testing and/or validation.

6.  Conclusions

   This document provides a description of common performance metrics
   and their defined use with SIP.  The use of these metrics will
   provide a common viewpoint across all vendors, service providers, and
   users.  These metrics will likely be utilized in production telephony
   SIP environments for providing input regarding Key Performance
   Indicators (KPI) and Service Level Agreement (SLA) indications;
   however, they may also be used for testing end-to-end SIP-based
   service environments.

7.  Security Considerations

   Security should be considered in the aspect of securing the relative
   data utilized in providing input to the above calculations.  All
   other aspects of security should be considered as described in
   RFC 3261 [RFC3261].

   Implementers of these metrics MUST realize that these metrics could
   be used to describe characteristics of customer and user usage
   patterns, and privacy should be considered when collecting,
   transporting, and storing them.












Malas & Morton               Standards Track                   [Page 25]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


8.  Contributors

   The following people made substantial contributions to this work:

      Carol Davids         Illinois Institute of Technology
      Marian Delkinov      Ericsson
      Adam Uzelac          Global Crossing
      Jean-Francois Mule   CableLabs
      Rich Terpstra        Level 3 Communications

9.  Acknowledgements

   We would like to thank Robert Sparks, John Hearty, and Dean Bayless
   for their efforts in reviewing the document and providing insight
   regarding clarification of certain aspects described throughout the
   document.  We also thank Dan Romascanu for his insightful comments
   and Vijay Gurbani for agreeing to perform the role of document
   shepherd.

10.  References

10.1.  Normative References

   [RFC2119]   Bradner, S., "Key words for use in RFCs to Indicate
               Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC3261]   Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston,
               A., Peterson, J., Sparks, R., Handley, M., and E.
               Schooler, "SIP: Session Initiation Protocol", RFC 3261,
               June 2002.

   [RFC3262]   Rosenberg, J. and H. Schulzrinne, "Reliability of
               Provisional Responses in Session Initiation Protocol
               (SIP)", RFC 3262, June 2002.

   [RFC3265]   Roach, A., "Session Initiation Protocol (SIP)-Specific
               Event Notification", RFC 3265, June 2002.

   [RFC3665]   Johnston, A., Donovan, S., Sparks, R., Cunningham, C.,
               and K. Summers, "Session Initiation Protocol (SIP) Basic
               Call Flow Examples", BCP 75, RFC 3665, December 2003.

   [RFC4780]   Lingle, K., Mule, J-F., Maeng, J., and D. Walker,
               "Management Information Base for the Session Initiation
               Protocol (SIP)", RFC 4780, April 2007.






Malas & Morton               Standards Track                   [Page 26]

RFC 6076           SIP End-to-End Performance Metrics       January 2011


10.2.  Informative References

   [E.411]     ITU-T, "Series E: Overall Network Operation, Telephone
               Service, Service Operation and Human Factors", E.411 ,
               March 2000.

   [E.721]     ITU-T, "Series E: Overall Network Operation, Telephone
               Service, Service Operation and Human Factors", E.721 ,
               May 1999.

   [GR-512]    Telcordia, "LSSGR: Reliability, Section 12", GR-512-
               CORE Issue 2, January 1998.

   [RFC2330]   Paxson, V., Almes, G., Mahdavi, J., and M. Mathis,
               "Framework for IP Performance Metrics", RFC 2330,
               May 1998.

   [RFC5486]   Malas, D. and D. Meyer, "Session Peering for Multimedia
               Interconnect (SPEERMINT) Terminology", RFC 5486,
               March 2009.

Authors' Addresses

   Daryl Malas
   CableLabs
   858 Coal Creek Circle
   Louisville, CO  80027
   US

   Phone: +1 303 661 3302
   EMail: d.malas@cablelabs.com


   Al Morton
   AT&T Labs
   200 Laurel Avenue South
   Middletown, NJ  07748
   US

   Phone: +1 732 420 1571
   EMail: acmorton@att.com










Malas & Morton               Standards Track                   [Page 27]