RFC1318: Definitions of Managed Objects for Parallel-printer-like Hardware Devices
Download in PDF format Download in text format
Obsoleted By:
RFC1660
Related keywords:
(MIB)
Network Working Group B. Stewart, Editor
Request for Comments: 1318 Xyplex, Inc.
April 1992
Definitions of Managed Objects
for Parallel-printer-like Hardware Devices
Status of this Memo
This document specifies an IAB standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "IAB
Official Protocol Standards" for the standardization state and status
of this protocol. Distribution of this memo is unlimited.
1. Abstract
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in TCP/IP based internets.
In particular, it defines objects for the management of
parallel-printer-like devices.
2. The Network Management Framework
The Internet-standard Network Management Framework consists
of three components. They are:
RFC 1155 which defines the SMI, the mechanisms used for
describing and naming objects for the purpose of management.
RFC 1212 defines a more concise description mechanism, which
is wholly consistent with the SMI.
RFC 1156 which defines MIB-I, the core set of managed
objects for the Internet suite of protocols. RFC 1213,
defines MIB-II, an evolution of MIB-I based on
implementation experience and new operational requirements.
RFC 1157 which defines the SNMP, the protocol used for
network access to managed objects.
The Framework permits new objects to be defined for the
purpose of experimentation and evaluation.
3. Objects
Managed objects are accessed via a virtual information
store, termed the Management Information Base or MIB.
Character MIB Working Group [Page 1]
RFC 1318 PARALLEL-PRINTER-LIKE-MIB April 1992
Objects in the MIB are defined using the subset of Abstract
Syntax Notation One (ASN.1) [7] defined in the SMI. In
particular, each object has a name, a syntax, and an
encoding. The name is an object identifier, an
administratively assigned name, which specifies an object
type.
The object type together with an object instance serves to
uniquely identify a specific instantiation of the object.
For human convenience, we often use a textual string, termed
the OBJECT DESCRIPTOR, to also refer to the object type.
The syntax of an object type defines the abstract data
structure corresponding to that object type. The ASN.1
language is used for this purpose. However, the SMI [3]
purposely restricts the ASN.1 constructs which may be used.
These restrictions are explicitly made for simplicity.
The encoding of an object type is simply how that object
type is represented using the object type's syntax.
Implicitly tied to the notion of an object type's syntax and
encoding is how the object type is represented when being
transmitted on the network.
The SMI specifies the use of the basic encoding rules of
ASN.1 [8], subject to the additional requirements imposed by
the SNMP.
3.1. Format of Definitions
Section 5 contains the specification of all object types
contained in this MIB module. The object types are defined
using the conventions defined in the SMI, as amended by the
extensions specified in [9,10].
4. Overview
The Parallel-printer-like Hardware Device MIB applies to
interface ports that might logically support the Interface
MIB, a Transmission MIB, or the Character MIB (most likely
the latter). The most common example is a Centronics or
Data Products type parallel printer port.
The Parallel-printer-like MIB is one of a set of MIBs
designed for complementary use. At this writing, the set
comprises:
Character MIB Working Group [Page 2]
RFC 1318 PARALLEL-PRINTER-LIKE-MIB April 1992
Character MIB
PPP MIB
RS-232-like MIB
Parallel-printer-like MIB
The RS-232-like MIB and the Parallel-printer-like MIB
represent the physical layer, providing service to higher
layers such as the Character MIB or PPP MIB. Further MIBs
may appear above these.
The following diagram shows two possible "MIB stacks", each
using the RS-232-like MIB.
.-----------------.
.-----------------. | Standard MIB |
| Telnet MIB | | Interface Group |
|-----------------| |-----------------|
| Character MIB | | PPP MIB |
|-----------------| |-----------------|
| RS-232-like MIB | | RS-232-like MIB |
`-----------------' `-----------------'
The intent of the model is for the physical-level MIBs to
represent the lowest level, regardless of the higher level
that may be using it. In turn, separate higher level MIBs
represent specific applications, such as a terminal (the
Character MIB) or a network connection (the PPP MIB).
The Parallel-printer-like MIB is mandatory for all systems
that have such a hardware port supporting services managed
through some other MIB, for example, the Character MIB.
The Parallel-printer-like MIB includes multiple similar
types of hardware, and as a result contains objects not
applicable to all of those types. Such objects are in a
separate branch of the MIB, which is required when
applicable and otherwise absent.
The Parallel-printer-like MIB includes Centronics, Data
Products, and other parallel physical links with a similar
set of control signals.
The MIB contains objects that relate to physical layer
connections. Such connections may provide interesting
hardware signals (other than for basic data transfer), such
as Power and PaperOut.
The MIB comprises one base object and three tables, detailed
Character MIB Working Group [Page 3]
RFC 1318 PARALLEL-PRINTER-LIKE-MIB April 1992
in the following sections. The tables contain objects for
ports and input and output control signals.
5. Definitions
RFC1318-MIB DEFINITIONS ::= BEGIN
IMPORTS
Counter
FROM RFC1155-SMI
transmission
FROM RFC1213-MIB
OBJECT-TYPE
FROM RFC-1212;
-- this is the MIB module for Parallel-printer-like
-- hardware devices
para OBJECT IDENTIFIER ::= { transmission 34 }
-- the generic Parallel-printer-like group
-- Implementation of this group is mandatory for all
-- systems that have Parallel-printer-like hardware
-- ports supporting higher level services such as
-- character streams
paraNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of ports (regardless of their current
state) in the Parallel-printer-like port table."
::= { para 1 }
-- the Parallel-printer-like Port table
paraPortTable OBJECT-TYPE
SYNTAX SEQUENCE OF ParaPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of port entries. The number of entries is
given by the value of paraNumber."
::= { para 2 }
Character MIB Working Group [Page 4]
RFC 1318 PARALLEL-PRINTER-LIKE-MIB April 1992
paraPortEntry OBJECT-TYPE
SYNTAX ParaPortEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Status and parameter values for a port."
INDEX { paraPortIndex }
::= { paraPortTable 1 }
ParaPortEntry ::=
SEQUENCE {
paraPortIndex
INTEGER,
paraPortType
INTEGER,
paraPortInSigNumber
INTEGER,
paraPortOutSigNumber
INTEGER
}
paraPortIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"A unique value for each port. Its value ranges
between 1 and the value of paraNumber. By
convention and if possible, hardware port numbers
map directly to external connectors. The value for
each port must remain constant at least from one
re-initialization of the network management agent to
the next."
::= { paraPortEntry 1 }
paraPortType OBJECT-TYPE
SYNTAX INTEGER {
other(1),
centronics(2),
dataproducts(3)
}
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The port's hardware type."
::= { paraPortEntry 2 }
paraPortInSigNumber OBJECT-TYPE
Character MIB Working Group [Page 5]
RFC 1318 PARALLEL-PRINTER-LIKE-MIB April 1992
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of input signals for the port in the
input signal table (paraPortInSigTable). The table
contains entries only for those signals the software
can detect."
::= { paraPortEntry 3 }
paraPortOutSigNumber OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of output signals for the port in the
output signal table (paraPortOutSigTable). The
table contains entries only for those signals the
software can assert."
::= { paraPortEntry 4 }
-- the Input Signal table
paraInSigTable OBJECT-TYPE
SYNTAX SEQUENCE OF ParaInSigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"A list of port input control signal entries."
::= { para 3 }
paraInSigEntry OBJECT-TYPE
SYNTAX ParaInSigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Input control signal status for a hardware port."
INDEX { paraInSigPortIndex, paraInSigName }
::= { paraInSigTable 1 }
ParaInSigEntry ::=
SEQUENCE {
paraInSigPortIndex
INTEGER,
paraInSigName
INTEGER,
paraInSigState
Character MIB Working Group [Page 6]
RFC 1318 PARALLEL-PRINTER-LIKE-MIB April 1992
INTEGER,
paraInSigChanges
Counter
}
paraInSigPortIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of paraPortIndex for the port to which
this entry belongs."
::= { paraInSigEntry 1 }
paraInSigName OBJECT-TYPE
SYNTAX INTEGER { power(1), online(2), busy(3),
paperout(4), fault(5) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identification of a hardware signal."
::= { paraInSigEntry 2 }
paraInSigState OBJECT-TYPE
SYNTAX INTEGER { none(1), on(2), off(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current signal state."
::= { paraInSigEntry 3 }
paraInSigChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times the signal has changed from
'on' to 'off' or from 'off' to 'on'."
::= { paraInSigEntry 4 }
-- the Output Signal table
paraOutSigTable OBJECT-TYPE
SYNTAX SEQUENCE OF ParaOutSigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
Character MIB Working Group [Page 7]
RFC 1318 PARALLEL-PRINTER-LIKE-MIB April 1992
"A list of port output control signal entries."
::= { para 4 }
paraOutSigEntry OBJECT-TYPE
SYNTAX ParaOutSigEntry
ACCESS not-accessible
STATUS mandatory
DESCRIPTION
"Output control signal status for a hardware port."
INDEX { paraOutSigPortIndex, paraOutSigName }
::= { paraOutSigTable 1 }
ParaOutSigEntry ::=
SEQUENCE {
paraOutSigPortIndex
INTEGER,
paraOutSigName
INTEGER,
paraOutSigState
INTEGER,
paraOutSigChanges
Counter
}
paraOutSigPortIndex OBJECT-TYPE
SYNTAX INTEGER
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The value of paraPortIndex for the port to which
this entry belongs."
::= { paraOutSigEntry 1 }
paraOutSigName OBJECT-TYPE
SYNTAX INTEGER { power(1), online(2), busy(3),
paperout(4), fault(5) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"Identification of a hardware signal."
::= { paraOutSigEntry 2 }
paraOutSigState OBJECT-TYPE
SYNTAX INTEGER { none(1), on(2), off(3) }
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The current signal state."
Character MIB Working Group [Page 8]
RFC 1318 PARALLEL-PRINTER-LIKE-MIB April 1992
::= { paraOutSigEntry 3 }
paraOutSigChanges OBJECT-TYPE
SYNTAX Counter
ACCESS read-only
STATUS mandatory
DESCRIPTION
"The number of times the signal has changed from
'on' to 'off' or from 'off' to 'on'."
::= { paraOutSigEntry 4 }
END
6. Acknowledgements
Based on several private MIBs, this document was produced by the
Character MIB Working Group:
Anne Ambler, Spider
Charles Bazaar, Emulex
Christopher Bucci, Datability
Anthony Chung, Hughes LAN Systems
George Conant, Xyplex
John Cook, Chipcom
James Davin, MIT-LCS
Shawn Gallagher, DEC
Tom Grant, Xylogics
Frank Huang, Emulex
David Jordan, Emulex
Satish Joshi, SynOptics
Frank Kastenholz, Clearpoint
Ken Key, University of Tennessee
Jim Kinder, Fibercom
Rajeev Kochhar, 3Com
John LoVerso, Xylogics
Keith McCloghrie, Hughes LAN Systems
Donald Merritt, BRL
David Perkins, 3Com
Jim Reinstedler, Ungerman-Bass
Marshall Rose, PSI
Ron Strich, SSDS
Dean Throop, DG
Bill Townsend, Xylogics
Jesse Walker, DEC
David Waitzman, BBN
Bill Westfield, cisco
Character MIB Working Group [Page 9]
RFC 1318 PARALLEL-PRINTER-LIKE-MIB April 1992
7. References
[1] Cerf, V., "IAB Recommendations for the Development of Internet
Network Management Standards", RFC 1052, NRI, April 1988.
[2] Cerf, V., "Report of the Second Ad Hoc Network Management Review
Group", RFC 1109, NRI, August 1989.
[3] Rose M., and K. McCloghrie, "Structure and Identification of
Management Information for TCP/IP-based internets", RFC 1155,
Performance Systems International, Hughes LAN Systems, May 1990.
[4] McCloghrie K., and M. Rose, "Management Information Base for
Network Management of TCP/IP-based internets", RFC 1156, Hughes
LAN Systems, Performance Systems International, May 1990.
[5] Case, J., Fedor, M., Schoffstall, M., and J. Davin, Simple
Network Management Protocol", RFC 1157, SNMP Research,
Performance Systems International, Performance Systems
International, MIT Laboratory for Computer Science, May 1990.
[6] McCloghrie K., and M. Rose, Editors, "Management Information Base
for Network Management of TCP/IP-based internets", RFC 1213,
Performance Systems International, March 1991.
[7] Information processing systems - Open Systems Interconnection -
Specification of Abstract Syntax Notation One (ASN.1),
International Organization for Standardization, International
Standard 8824, December 1987.
[8] Information processing systems - Open Systems Interconnection -
Specification of Basic Encoding Rules for Abstract Notation One
(ASN.1), International Organization for Standardization,
International Standard 8825, December 1987.
[9] Rose, M., and K. McCloghrie, Editors, "Concise MIB Definitions",
RFC 1212, Performance Systems International, Hughes LAN Systems,
March 1991.
[10] Rose, M., Editor, "A Convention for Defining Traps for use with
the SNMP", RFC 1215, Performance Systems International, March
1991.
8. Security Considerations
Security issues are not discussed in this memo.
Character MIB Working Group [Page 10]
RFC 1318 PARALLEL-PRINTER-LIKE-MIB April 1992
9. Author's Address
Bob Stewart
Xyplex, Inc.
330 Codman Hill Road
Boxborough, MA 01719
Phone: (508) 264-9900
EMail: rlstewart@eng.xyplex.com
Character MIB Working Group [Page 11]