Network Working Group R. Austein
Request for Comments: 1612 Epilogue Technology Corporation
Category: Standards Track J. Saperia
Digital Equipment Corporation
May 1994
DNS Resolver MIB Extensions
Status of this Memo
This document specifies an Internet standards track protocol for the
Internet community, and requests discussion and suggestions for
improvements. Please refer to the current edition of the "Internet
Official Protocol Standards" (STD 1) for the standardization state
and status of this protocol. Distribution of this memo is unlimited.
Table of Contents
1. Introduction .............................................. 1
2. The SNMPv2 Network Management Framework ................... 2
2.1 Object Definitions ....................................... 2
3. Overview .................................................. 2
3.1 Resolvers ................................................ 3
3.2 Name Servers ............................................. 3
3.3 Selected Objects ......................................... 4
3.4 Textual Conventions ...................................... 4
4. Definitions ............................................... 5
5. Acknowledgements .......................................... 30
6. References ................................................ 30
7. Security Considerations ................................... 32
8. Authors' Addresses ........................................ 32
1. Introduction
This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community.
In particular, it describes a set of extensions which instrument DNS
resolver functions. This memo was produced by the DNS working group.
With the adoption of the Internet-standard Network Management
Framework [4,5,6,7], and with a large number of vendor
implementations of these standards in commercially available
products, it became possible to provide a higher level of effective
network management in TCP/IP-based internets than was previously
available. With the growth in the use of these standards, it has
become possible to consider the management of other elements of the
infrastructure beyond the basic TCP/IP protocols. A key element of
Austein & Saperia [Page 1]
RFC 1612 DNS Resolver MIB May 1994
the TCP/IP infrastructure is the DNS.
Up to this point there has been no mechanism to integrate the
management of the DNS with SNMP-based managers. This memo provides
the mechanisms by which IP-based management stations can effectively
manage DNS resolver software in an integrated fashion.
We have defined DNS MIB objects to be used in conjunction with the
Internet MIB to allow access to and control of DNS resolver software
via SNMP by the Internet community.
2. The SNMPv2 Network Management Framework
The SNMPv2 Network Management Framework consists of four major
components. They are:
o RFC 1442 which defines the SMI, the mechanisms used for
describing and naming objects for the purpose of management.
o STD 17, RFC 1213 defines MIB-II, the core set of managed
objects for the Internet suite of protocols.
o RFC 1445 which defines the administrative and other
architectural aspects of the framework.
o RFC 1448 which defines the protocol used for network access to
managed objects.
The Framework permits new objects to be defined for the purpose of
experimentation and evaluation.
2.1. Object Definitions
Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. Objects in the MIB are
defined using the subset of Abstract Syntax Notation One (ASN.1)
defined in the SMI. In particular, each object object type is named
by an OBJECT IDENTIFIER, an administratively assigned name. The
object type together with an object instance serves to uniquely
identify a specific instantiation of the object. For human
convenience, we often use a textual string, termed the descriptor, to
refer to the object type.
3. Overview
In theory, the DNS world is pretty simple. There are two kinds of
entities: resolvers and name servers. Resolvers ask questions. Name
servers answer them. The real world, however, is not so simple.
Austein & Saperia [Page 2]
RFC 1612 DNS Resolver MIB May 1994
Implementors have made widely differing choices about how to divide
DNS functions between resolvers and servers. They have also
constructed various sorts of exotic hybrids. The most difficult task
in defining this MIB was to accommodate this wide range of entities
without having to come up with a separate MIB for each.
We divided up the various DNS functions into two, non-overlapping
classes, called "resolver functions" and "name server functions." A
DNS entity that performs what we define as resolver functions
contains a resolver, and therefore must implement the MIB groups
required of all resolvers which are defined in this module. Some
resolvers also implement "optional" functions such as a cache, in
which case they must also implement the cache group contained in this
MIB. A DNS entity which implements name server functions is
considered to be a name server, and must implement the MIB groups
required for name servers which are defined in a separate module. If
the same piece of software performs both resolver and server
functions, we imagine that it contains both a resolver and a server
and would thus implement both the DNS Server and DNS Resolver MIBs.
3.1. Resolvers
In our model, a resolver is a program (or piece thereof) which
obtains resource records from servers. Normally it does so at the
behest of an application, but may also do so as part of its own
operation. A resolver sends DNS protocol queries and receives DNS
protocol replies. A resolver neither receives queries nor sends
replies. A full service resolver is one that knows how to resolve
queries: it obtains the needed resource records by contacting a
server authoritative for the records desired. A stub resolver does
not know how to resolve queries: it sends all queries to a local name
server, setting the "recursion desired" flag to indicate that it
hopes that the name server will be willing to resolve the query. A
resolver may (optionally) have a cache for remembering previously
acquired resource records. It may also have a negative cache for
remembering names or data that have been determined not to exist.
3.2. Name Servers
A name server is a program (or piece thereof) that provides resource
records to resolvers. All references in this document to "a name
server" imply "the name server's role"; in some cases the name
server's role and the resolver's role might be combined into a single
program. A name server receives DNS protocol queries and sends DNS
protocol replies. A name server neither sends queries nor receives
replies. As a consequence, name servers do not have caches.
Normally, a name server would expect to receive only those queries to
which it could respond with authoritative information. However, if a
Austein & Saperia [Page 3]
RFC 1612 DNS Resolver MIB May 1994
name server receives a query that it cannot respond to with purely
authoritative information, it may choose to try to obtain the
necessary additional information from a resolver which may or may not
be a separate process.
3.3. Selected Objects
Many of the objects included in this memo have been created from
information contained in the DNS specifications [1,2], as amended and
clarified by subsequent host requirements documents [3]. Other
objects have been created based on experience with existing DNS
management tools, expected operational needs, the statistics
generated by existing DNS implementations, and the configuration
files used by existing DNS implementations. These objects have been
ordered into groups as follows:
o Resolver Configuration Group
o Resolver Counter Group
o Resolver Lame Delegation Group
o Resolver Cache Group
o Resolver Negative Cache Group
o Resolver Optional Counter Group
This information has been converted into a standard form using the
SNMPv2 SMI defined in [9]. For the most part, the descriptions are
influenced by the DNS related RFCs noted above. For example, the
descriptions for counters used for the various types of queries of
DNS records are influenced by the definitions used for the various
record types found in [2].
3.4. Textual Conventions
Several conceptual data types have been introduced as a textual
conventions in the DNS Server MIB document and have been imported
into this MIB module. These additions will facilitate the common
understanding of information used by the DNS. No changes to the SMI
or the SNMP are necessary to support these conventions.
Readers familiar with MIBs designed to manage entities in the lower
layers of the Internet protocol suite may be surprised at the number
of non-enumerated integers used in this MIB to represent values such
as DNS RR class and type numbers. The reason for this choice is
simple: the DNS itself is designed as an extensible protocol,
Austein & Saperia [Page 4]
RFC 1612 DNS Resolver MIB May 1994
allowing new classes and types of resource records to be added to the
protocol without recoding the core DNS software. Using non-
enumerated integers to represent these data types in this MIB allows
the MIB to accommodate these changes as well.
4. Definitions
DNS-RESOLVER-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Counter32, Integer32
FROM SNMPv2-SMI
TEXTUAL-CONVENTION, RowStatus, DisplayString
FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF
dns, DnsName, DnsNameAsIndex, DnsClass, DnsType, DnsQClass,
DnsQType, DnsTime, DnsOpCode, DnsRespCode
FROM DNS-SERVER-MIB;
-- DNS Resolver MIB
dnsResMIB MODULE-IDENTITY
LAST-UPDATED "9401282250Z"
ORGANIZATION "IETF DNS Working Group"
CONTACT-INFO
" Rob Austein
Postal: Epilogue Technology Corporation
268 Main Street, Suite 283
North Reading, MA 10864
US
Tel: +1 617 245 0804
Fax: +1 617 245 8122
E-Mail: sra@epilogue.com
Jon Saperia
Postal: Digital Equipment Corporation
110 Spit Brook Road
ZKO1-3/H18
Nashua, NH 03062-2698
US
Tel: +1 603 881 0480
Fax: +1 603 881 0120
E-mail: saperia@zko.dec.com"
DESCRIPTION
"The MIB module for entities implementing the client
(resolver) side of the Domain Name System (DNS)
protocol."
Austein & Saperia [Page 5]
RFC 1612 DNS Resolver MIB May 1994
::= { dns 2 }
dnsResMIBObjects OBJECT IDENTIFIER ::= { dnsResMIB 1 }
-- (Old-style) groups in the DNS resolver MIB.
dnsResConfig OBJECT IDENTIFIER ::= { dnsResMIBObjects 1 }
dnsResCounter OBJECT IDENTIFIER ::= { dnsResMIBObjects 2 }
dnsResLameDelegation OBJECT IDENTIFIER ::= { dnsResMIBObjects 3 }
dnsResCache OBJECT IDENTIFIER ::= { dnsResMIBObjects 4 }
dnsResNCache OBJECT IDENTIFIER ::= { dnsResMIBObjects 5 }
dnsResOptCounter OBJECT IDENTIFIER ::= { dnsResMIBObjects 6 }
-- Resolver Configuration Group
dnsResConfigImplementIdent OBJECT-TYPE
SYNTAX DisplayString
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The implementation identification string for the
resolver software in use on the system, for example;
`RES-2.1'"
::= { dnsResConfig 1 }
dnsResConfigService OBJECT-TYPE
SYNTAX INTEGER { recursiveOnly(1),
iterativeOnly(2),
recursiveAndIterative(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Kind of DNS resolution service provided:
recursiveOnly(1) indicates a stub resolver.
iterativeOnly(2) indicates a normal full service
resolver.
recursiveAndIterative(3) indicates a full-service
resolver which performs a mix of recursive and iterative
queries."
::= { dnsResConfig 2 }
dnsResConfigMaxCnames OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS read-write
Austein & Saperia [Page 6]
RFC 1612 DNS Resolver MIB May 1994
STATUS current
DESCRIPTION
"Limit on how many CNAMEs the resolver should allow
before deciding that there's a CNAME loop. Zero means
that resolver has no explicit CNAME limit."
REFERENCE
"RFC-1035 section 7.1."
::= { dnsResConfig 3 }
-- DNS Resolver Safety Belt Table
dnsResConfigSbeltTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsResConfigSbeltEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of safety belt information used by the resolver
when it hasn't got any better idea of where to send a
query, such as when the resolver is booting or is a stub
resolver."
::= { dnsResConfig 4 }
dnsResConfigSbeltEntry OBJECT-TYPE
SYNTAX DnsResConfigSbeltEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the resolver's Sbelt table.
Rows may be created or deleted at any time by the DNS
resolver and by SNMP SET requests. Whether the values
changed via SNMP are saved in stable storage across
`reset' operations is implementation-specific."
INDEX { dnsResConfigSbeltAddr,
dnsResConfigSbeltSubTree,
dnsResConfigSbeltClass }
::= { dnsResConfigSbeltTable 1 }
DnsResConfigSbeltEntry ::=
SEQUENCE {
dnsResConfigSbeltAddr
IpAddress,
dnsResConfigSbeltName
DnsName,
dnsResConfigSbeltRecursion
INTEGER,
dnsResConfigSbeltPref
INTEGER,
dnsResConfigSbeltSubTree
Austein & Saperia [Page 7]
RFC 1612 DNS Resolver MIB May 1994
DnsNameAsIndex,
dnsResConfigSbeltClass
DnsClass,
dnsResConfigSbeltStatus
RowStatus
}
dnsResConfigSbeltAddr OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The IP address of the Sbelt name server identified by
this row of the table."
::= { dnsResConfigSbeltEntry 1 }
dnsResConfigSbeltName OBJECT-TYPE
SYNTAX DnsName
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"The DNS name of a Sbelt nameserver identified by this
row of the table. A zero-length string indicates that
the name is not known by the resolver."
::= { dnsResConfigSbeltEntry 2 }
dnsResConfigSbeltRecursion OBJECT-TYPE
SYNTAX INTEGER { iterative(1),
recursive(2),
recursiveAndIterative(3) }
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Kind of queries resolver will be sending to the name
server identified in this row of the table:
iterative(1) indicates that resolver will be directing
iterative queries to this name server (RD bit turned
off).
recursive(2) indicates that resolver will be directing
recursive queries to this name server (RD bit turned
on).
recursiveAndIterative(3) indicates that the resolver
will be directing both recursive and iterative queries
to the server identified in this row of the table."
::= { dnsResConfigSbeltEntry 3 }
Austein & Saperia [Page 8]
RFC 1612 DNS Resolver MIB May 1994
dnsResConfigSbeltPref OBJECT-TYPE
SYNTAX INTEGER (0..2147483647)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This value identifies the preference for the name server
identified in this row of the table. The lower the
value, the more desirable the resolver considers this
server."
::= { dnsResConfigSbeltEntry 4 }
dnsResConfigSbeltSubTree OBJECT-TYPE
SYNTAX DnsNameAsIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Queries sent to the name server identified by this row
of the table are limited to those for names in the name
subtree identified by this variable. If no such
limitation applies, the value of this variable is the
name of the root domain (a DNS name consisting of a
single zero octet)."
::= { dnsResConfigSbeltEntry 5 }
dnsResConfigSbeltClass OBJECT-TYPE
SYNTAX DnsClass
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The class of DNS queries that will be sent to the server
identified by this row of the table."
::= { dnsResConfigSbeltEntry 6 }
dnsResConfigSbeltStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Row status column for this row of the Sbelt table."
::= { dnsResConfigSbeltEntry 7 }
dnsResConfigUpTime OBJECT-TYPE
SYNTAX DnsTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the resolver has a persistent state (e.g., a
process), this value will be the time elapsed since it
Austein & Saperia [Page 9]
RFC 1612 DNS Resolver MIB May 1994
started. For software without persistant state, this
value will be 0."
::= { dnsResConfig 5 }
dnsResConfigResetTime OBJECT-TYPE
SYNTAX DnsTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"If the resolver has a persistent state (e.g., a process)
and supports a `reset' operation (e.g., can be told to
re-read configuration files), this value will be the
time elapsed since the last time the resolver was
`reset.' For software that does not have persistence or
does not support a `reset' operation, this value will be
zero."
::= { dnsResConfig 6 }
dnsResConfigReset OBJECT-TYPE
SYNTAX INTEGER { other(1),
reset(2),
initializing(3),
running(4) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status/action object to reinitialize any persistant
resolver state. When set to reset(2), any persistant
resolver state (such as a process) is reinitialized as if
the resolver had just been started. This value will
never be returned by a read operation. When read, one of
the following values will be returned:
other(1) - resolver in some unknown state;
initializing(3) - resolver (re)initializing;
running(4) - resolver currently running."
::= { dnsResConfig 7 }
-- Resolver Counters Group
-- Resolver Counter Table
dnsResCounterByOpcodeTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsResCounterByOpcodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of the current count of resolver queries and
Austein & Saperia [Page 10]
RFC 1612 DNS Resolver MIB May 1994
answers."
::= { dnsResCounter 3 }
dnsResCounterByOpcodeEntry OBJECT-TYPE
SYNTAX DnsResCounterByOpcodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the resolver counter table. Entries are
indexed by DNS OpCode."
INDEX { dnsResCounterByOpcodeCode }
::= { dnsResCounterByOpcodeTable 1 }
DnsResCounterByOpcodeEntry ::=
SEQUENCE {
dnsResCounterByOpcodeCode
DnsOpCode,
dnsResCounterByOpcodeQueries
Counter32,
dnsResCounterByOpcodeResponses
Counter32
}
dnsResCounterByOpcodeCode OBJECT-TYPE
SYNTAX DnsOpCode
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index to this table. The OpCodes that have already
been defined are found in RFC-1035."
REFERENCE
"RFC-1035 section 4.1.1."
::= { dnsResCounterByOpcodeEntry 1 }
dnsResCounterByOpcodeQueries OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Total number of queries that have sent out by the
resolver since initialization for the OpCode which is
the index to this row of the table."
::= { dnsResCounterByOpcodeEntry 2 }
dnsResCounterByOpcodeResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
Austein & Saperia [Page 11]
RFC 1612 DNS Resolver MIB May 1994
DESCRIPTION
"Total number of responses that have been received by the
resolver since initialization for the OpCode which is
the index to this row of the table."
::= { dnsResCounterByOpcodeEntry 3 }
-- Resolver Response Code Counter Table
dnsResCounterByRcodeTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsResCounterByRcodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of the current count of responses to resolver
queries."
::= { dnsResCounter 4 }
dnsResCounterByRcodeEntry OBJECT-TYPE
SYNTAX DnsResCounterByRcodeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry in the resolver response table. Entries are
indexed by DNS response code."
INDEX { dnsResCounterByRcodeCode }
::= { dnsResCounterByRcodeTable 1 }
DnsResCounterByRcodeEntry ::=
SEQUENCE {
dnsResCounterByRcodeCode
DnsRespCode,
dnsResCounterByRcodeResponses
Counter32
}
dnsResCounterByRcodeCode OBJECT-TYPE
SYNTAX DnsRespCode
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The index to this table. The Response Codes that have
already been defined are found in RFC-1035."
REFERENCE
"RFC-1035 section 4.1.1."
::= { dnsResCounterByRcodeEntry 1 }
Austein & Saperia [Page 12]
RFC 1612 DNS Resolver MIB May 1994
dnsResCounterByRcodeResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of responses the resolver has received for the
response code value which identifies this row of the
table."
::= { dnsResCounterByRcodeEntry 2 }
-- Additional DNS Resolver Counter Objects
dnsResCounterNonAuthDataResps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests made by the resolver for which a
non-authoritative answer (cached data) was received."
::= { dnsResCounter 5 }
dnsResCounterNonAuthNoDataResps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests made by the resolver for which a
non-authoritative answer - no such data response (empty
answer) was received."
::= { dnsResCounter 6 }
dnsResCounterMartians OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of responses received which were received from
servers that the resolver does not think it asked."
::= { dnsResCounter 7 }
dnsResCounterRecdResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of responses received to all queries."
::= { dnsResCounter 8 }
Austein & Saperia [Page 13]
RFC 1612 DNS Resolver MIB May 1994
dnsResCounterUnparseResps OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of responses received which were unparseable."
::= { dnsResCounter 9 }
dnsResCounterFallbacks OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times the resolver had to fall back to its
seat belt information."
::= { dnsResCounter 10 }
-- Lame Delegation Group
dnsResLameDelegationOverflows OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of times the resolver attempted to add an entry
to the Lame Delegation table but was unable to for some
reason such as space constraints."
::= { dnsResLameDelegation 1 }
-- Lame Delegation Table
dnsResLameDelegationTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsResLameDelegationEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Table of name servers returning lame delegations.
A lame delegation has occured when a parent zone
delegates authority for a child zone to a server that
appears not to think that it is authoritative for the
child zone in question."
::= { dnsResLameDelegation 2 }
dnsResLameDelegationEntry OBJECT-TYPE
SYNTAX DnsResLameDelegationEntry
MAX-ACCESS not-accessible
Austein & Saperia [Page 14]
RFC 1612 DNS Resolver MIB May 1994
STATUS current
DESCRIPTION
"Entry in lame delegation table. Only the resolver may
create rows in this table. SNMP SET requests may be used
to delete rows."
INDEX { dnsResLameDelegationSource,
dnsResLameDelegationName,
dnsResLameDelegationClass }
::= { dnsResLameDelegationTable 1 }
DnsResLameDelegationEntry ::=
SEQUENCE {
dnsResLameDelegationSource
IpAddress,
dnsResLameDelegationName
DnsNameAsIndex,
dnsResLameDelegationClass
DnsClass,
dnsResLameDelegationCounts
Counter32,
dnsResLameDelegationStatus
RowStatus
}
dnsResLameDelegationSource OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Source of lame delegation."
::= { dnsResLameDelegationEntry 1 }
dnsResLameDelegationName OBJECT-TYPE
SYNTAX DnsNameAsIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DNS name for which lame delegation was received."
::= { dnsResLameDelegationEntry 2 }
dnsResLameDelegationClass OBJECT-TYPE
SYNTAX DnsClass
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DNS class of received lame delegation."
::= { dnsResLameDelegationEntry 3 }
Austein & Saperia [Page 15]
RFC 1612 DNS Resolver MIB May 1994
dnsResLameDelegationCounts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"How many times this lame delegation has been received."
::= { dnsResLameDelegationEntry 4 }
dnsResLameDelegationStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status column for the lame delegation table. Since only
the agent (DNS resolver) creates rows in this table, the
only values that a manager may write to this variable
are active(1) and destroy(6)."
::= { dnsResLameDelegationEntry 5 }
-- Resolver Cache Group
dnsResCacheStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2), clear(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status/action for the resolver's cache.
enabled(1) means that the use of the cache is allowed.
Query operations can return this state.
disabled(2) means that the cache is not being used.
Query operations can return this state.
Setting this variable to clear(3) deletes the entire
contents of the resolver's cache, but does not otherwise
change the resolver's state. The status will retain its
previous value from before the clear operation (i.e.,
enabled(1) or disabled(2)). The value of clear(3) can
NOT be returned by a query operation."
::= { dnsResCache 1 }
dnsResCacheMaxTTL OBJECT-TYPE
SYNTAX DnsTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
Austein & Saperia [Page 16]
RFC 1612 DNS Resolver MIB May 1994
"Maximum Time-To-Live for RRs in this cache. If the
resolver does not implement a TTL ceiling, the value of
this field should be zero."
::= { dnsResCache 2 }
dnsResCacheGoodCaches OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RRs the resolver has cached successfully."
::= { dnsResCache 3 }
dnsResCacheBadCaches OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of RRs the resolver has refused to cache because
they appear to be dangerous or irrelevant. E.g., RRs
with suspiciously high TTLs, unsolicited root
information, or that just don't appear to be relevant to
the question the resolver asked."
::= { dnsResCache 4 }
-- Resolver Cache Table
dnsResCacheRRTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsResCacheRREntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This table contains information about all the resource
records currently in the resolver's cache."
::= { dnsResCache 5 }
dnsResCacheRREntry OBJECT-TYPE
SYNTAX DnsResCacheRREntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the resolvers's cache. Rows may be created
only by the resolver. SNMP SET requests may be used to
delete rows."
INDEX { dnsResCacheRRName,
dnsResCacheRRClass,
dnsResCacheRRType,
dnsResCacheRRIndex }
Austein & Saperia [Page 17]
RFC 1612 DNS Resolver MIB May 1994
::= { dnsResCacheRRTable 1 }
DnsResCacheRREntry ::=
SEQUENCE {
dnsResCacheRRName
DnsNameAsIndex,
dnsResCacheRRClass
DnsClass,
dnsResCacheRRType
DnsType,
dnsResCacheRRTTL
DnsTime,
dnsResCacheRRElapsedTTL
DnsTime,
dnsResCacheRRSource
IpAddress,
dnsResCacheRRData
OCTET STRING,
dnsResCacheRRStatus
RowStatus,
dnsResCacheRRIndex
Integer32,
dnsResCacheRRPrettyName
DnsName
}
dnsResCacheRRName OBJECT-TYPE
SYNTAX DnsNameAsIndex
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Owner name of the Resource Record in the cache which is
identified in this row of the table. As described in
RFC-1034, the owner of the record is the domain name
were the RR is found."
REFERENCE
"RFC-1034 section 3.6."
::= { dnsResCacheRREntry 1 }
dnsResCacheRRClass OBJECT-TYPE
SYNTAX DnsClass
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DNS class of the Resource Record in the cache which is
identified in this row of the table."
::= { dnsResCacheRREntry 2 }
Austein & Saperia [Page 18]
RFC 1612 DNS Resolver MIB May 1994
dnsResCacheRRType OBJECT-TYPE
SYNTAX DnsType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DNS type of the Resource Record in the cache which is
identified in this row of the table."
::= { dnsResCacheRREntry 3 }
dnsResCacheRRTTL OBJECT-TYPE
SYNTAX DnsTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time-To-Live of RR in DNS cache. This is the initial
TTL value which was received with the RR when it was
originally received."
::= { dnsResCacheRREntry 4 }
dnsResCacheRRElapsedTTL OBJECT-TYPE
SYNTAX DnsTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Elapsed seconds since RR was received."
::= { dnsResCacheRREntry 5 }
dnsResCacheRRSource OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Host from which RR was received, 0.0.0.0 if unknown."
::= { dnsResCacheRREntry 6 }
dnsResCacheRRData OBJECT-TYPE
SYNTAX OCTET STRING
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"RDATA portion of a cached RR. The value is in the
format defined for the particular DNS class and type of
the resource record."
REFERENCE
"RFC-1035 section 3.2.1."
::= { dnsResCacheRREntry 7 }
Austein & Saperia [Page 19]
RFC 1612 DNS Resolver MIB May 1994
dnsResCacheRRStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status column for the resolver cache table. Since only
the agent (DNS resolver) creates rows in this table, the
only values that a manager may write to this variable
are active(1) and destroy(6)."
::= { dnsResCacheRREntry 8 }
dnsResCacheRRIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"A value which makes entries in the table unique when the
other index values (dnsResCacheRRName,
dnsResCacheRRClass, and dnsResCacheRRType) do not
provide a unique index."
::= { dnsResCacheRREntry 9 }
dnsResCacheRRPrettyName OBJECT-TYPE
SYNTAX DnsName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Name of the RR at this row in the table. This is
identical to the dnsResCacheRRName variable, except that
character case is preserved in this variable, per DNS
conventions."
REFERENCE
"RFC-1035 section 2.3.3."
::= { dnsResCacheRREntry 10 }
-- Resolver Negative Cache Group
dnsResNCacheStatus OBJECT-TYPE
SYNTAX INTEGER { enabled(1), disabled(2), clear(3) }
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status/action for the resolver's negative response
cache.
enabled(1) means that the use of the negative response
cache is allowed. Query operations can return this
state.
Austein & Saperia [Page 20]
RFC 1612 DNS Resolver MIB May 1994
disabled(2) means that the negative response cache is
not being used. Query operations can return this state.
Setting this variable to clear(3) deletes the entire
contents of the resolver's negative response cache. The
status will retain its previous value from before the
clear operation (i.e., enabled(1) or disabled(2)). The
value of clear(3) can NOT be returned by a query
operation."
::= { dnsResNCache 1 }
dnsResNCacheMaxTTL OBJECT-TYPE
SYNTAX DnsTime
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Maximum Time-To-Live for cached authoritative errors.
If the resolver does not implement a TTL ceiling, the
value of this field should be zero."
::= { dnsResNCache 2 }
dnsResNCacheGoodNCaches OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of authoritative errors the resolver has cached
successfully."
::= { dnsResNCache 3 }
dnsResNCacheBadNCaches OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of authoritative errors the resolver would have
liked to cache but was unable to because the appropriate
SOA RR was not supplied or looked suspicious."
REFERENCE
"RFC-1034 section 4.3.4."
::= { dnsResNCache 4 }
-- Resolver Negative Cache Table
dnsResNCacheErrTable OBJECT-TYPE
SYNTAX SEQUENCE OF DnsResNCacheErrEntry
MAX-ACCESS not-accessible
STATUS current
Austein & Saperia [Page 21]
RFC 1612 DNS Resolver MIB May 1994
DESCRIPTION
"The resolver's negative response cache. This table
contains information about authoritative errors that
have been cached by the resolver."
::= { dnsResNCache 5 }
dnsResNCacheErrEntry OBJECT-TYPE
SYNTAX DnsResNCacheErrEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"An entry in the resolver's negative response cache
table. Only the resolver can create rows. SNMP SET
requests may be used to delete rows."
INDEX { dnsResNCacheErrQName,
dnsResNCacheErrQClass,
dnsResNCacheErrQType,
dnsResNCacheErrIndex }
::= { dnsResNCacheErrTable 1 }
DnsResNCacheErrEntry ::=
SEQUENCE {
dnsResNCacheErrQName
DnsNameAsIndex,
dnsResNCacheErrQClass
DnsQClass,
dnsResNCacheErrQType
DnsQType,
dnsResNCacheErrTTL
DnsTime,
dnsResNCacheErrElapsedTTL
DnsTime,
dnsResNCacheErrSource
IpAddress,
dnsResNCacheErrCode
INTEGER,
dnsResNCacheErrStatus
RowStatus,
dnsResNCacheErrIndex
Integer32,
dnsResNCacheErrPrettyName
DnsName
}
dnsResNCacheErrQName OBJECT-TYPE
SYNTAX DnsNameAsIndex
MAX-ACCESS not-accessible
STATUS current
Austein & Saperia [Page 22]
RFC 1612 DNS Resolver MIB May 1994
DESCRIPTION
"QNAME associated with a cached authoritative error."
REFERENCE
"RFC-1034 section 3.7.1."
::= { dnsResNCacheErrEntry 1 }
dnsResNCacheErrQClass OBJECT-TYPE
SYNTAX DnsQClass
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DNS QCLASS associated with a cached authoritative
error."
::= { dnsResNCacheErrEntry 2 }
dnsResNCacheErrQType OBJECT-TYPE
SYNTAX DnsQType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"DNS QTYPE associated with a cached authoritative error."
::= { dnsResNCacheErrEntry 3 }
dnsResNCacheErrTTL OBJECT-TYPE
SYNTAX DnsTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Time-To-Live of a cached authoritative error at the time
of the error, it should not be decremented by the number
of seconds since it was received. This should be the
TTL as copied from the MINIMUM field of the SOA that
accompanied the authoritative error, or a smaller value
if the resolver implements a ceiling on negative
response cache TTLs."
REFERENCE
"RFC-1034 section 4.3.4."
::= { dnsResNCacheErrEntry 4 }
dnsResNCacheErrElapsedTTL OBJECT-TYPE
SYNTAX DnsTime
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Elapsed seconds since authoritative error was received."
::= { dnsResNCacheErrEntry 5 }
Austein & Saperia [Page 23]
RFC 1612 DNS Resolver MIB May 1994
dnsResNCacheErrSource OBJECT-TYPE
SYNTAX IpAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Host which sent the authoritative error, 0.0.0.0 if
unknown."
::= { dnsResNCacheErrEntry 6 }
dnsResNCacheErrCode OBJECT-TYPE
SYNTAX INTEGER { nonexistantName(1), noData(2), other(3) }
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The authoritative error that has been cached:
nonexistantName(1) indicates an authoritative name error
(RCODE = 3).
noData(2) indicates an authoritative response with no
error (RCODE = 0) and no relevant data.
other(3) indicates some other cached authoritative
error. At present, no such errors are known to exist."
::= { dnsResNCacheErrEntry 7 }
dnsResNCacheErrStatus OBJECT-TYPE
SYNTAX RowStatus
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"Status column for the resolver negative response cache
table. Since only the agent (DNS resolver) creates rows
in this table, the only values that a manager may write
to this variable are active(1) and destroy(6)."
::= { dnsResNCacheErrEntry 8 }
dnsResNCacheErrIndex OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"A value which makes entries in the table unique when the
other index values (dnsResNCacheErrQName,
dnsResNCacheErrQClass, and dnsResNCacheErrQType) do not
provide a unique index."
::= { dnsResNCacheErrEntry 9 }
Austein & Saperia [Page 24]
RFC 1612 DNS Resolver MIB May 1994
dnsResNCacheErrPrettyName OBJECT-TYPE
SYNTAX DnsName
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"QNAME associated with this row in the table. This is
identical to the dnsResNCacheErrQName variable, except
that character case is preserved in this variable, per
DNS conventions."
REFERENCE
"RFC-1035 section 2.3.3."
::= { dnsResNCacheErrEntry 10 }
-- Resolver Optional Counters Group
dnsResOptCounterReferals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of responses which were received from servers
redirecting query to another server."
::= { dnsResOptCounter 1 }
dnsResOptCounterRetrans OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number requests retransmitted for all reasons."
::= { dnsResOptCounter 2 }
dnsResOptCounterNoResponses OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of queries that were retransmitted because of no
response."
::= { dnsResOptCounter 3 }
dnsResOptCounterRootRetrans OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of queries that were retransmitted that were to
Austein & Saperia [Page 25]
RFC 1612 DNS Resolver MIB May 1994
root servers."
::= { dnsResOptCounter 4 }
dnsResOptCounterInternals OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests internally generated by the
resolver."
::= { dnsResOptCounter 5 }
dnsResOptCounterInternalTimeOuts OBJECT-TYPE
SYNTAX Counter32
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of requests internally generated which timed
out."
::= { dnsResOptCounter 6 }
-- SNMPv2 groups.
dnsResMIBGroups OBJECT IDENTIFIER ::= { dnsResMIB 2 }
dnsResConfigGroup OBJECT-GROUP
OBJECTS { dnsResConfigImplementIdent,
dnsResConfigService,
dnsResConfigMaxCnames,
dnsResConfigSbeltAddr,
dnsResConfigSbeltName,
dnsResConfigSbeltRecursion,
dnsResConfigSbeltPref,
dnsResConfigSbeltSubTree,
dnsResConfigSbeltClass,
dnsResConfigSbeltStatus,
dnsResConfigUpTime,
dnsResConfigResetTime }
STATUS current
DESCRIPTION
"A collection of objects providing basic configuration
information for a DNS resolver implementation."
::= { dnsResMIBGroups 1 }
dnsResCounterGroup OBJECT-GROUP
OBJECTS { dnsResCounterByOpcodeCode,
dnsResCounterByOpcodeQueries,
Austein & Saperia [Page 26]
RFC 1612 DNS Resolver MIB May 1994
dnsResCounterByOpcodeResponses,
dnsResCounterByRcodeCode,
dnsResCounterByRcodeResponses,
dnsResCounterNonAuthDataResps,
dnsResCounterNonAuthNoDataResps,
dnsResCounterMartians,
dnsResCounterRecdResponses,
dnsResCounterUnparseResps,
dnsResCounterFallbacks }
STATUS current
DESCRIPTION
"A collection of objects providing basic instrumentation
of a DNS resolver implementation."
::= { dnsResMIBGroups 2 }
dnsResLameDelegationGroup OBJECT-GROUP
OBJECTS { dnsResLameDelegationOverflows,
dnsResLameDelegationSource,
dnsResLameDelegationName,
dnsResLameDelegationClass,
dnsResLameDelegationCounts,
dnsResLameDelegationStatus }
STATUS current
DESCRIPTION
"A collection of objects providing instrumentation of
`lame delegation' failures."
::= { dnsResMIBGroups 3 }
dnsResCacheGroup OBJECT-GROUP
OBJECTS { dnsResCacheStatus,
dnsResCacheMaxTTL,
dnsResCacheGoodCaches,
dnsResCacheBadCaches,
dnsResCacheRRName,
dnsResCacheRRClass,
dnsResCacheRRType,
dnsResCacheRRTTL,
dnsResCacheRRElapsedTTL,
dnsResCacheRRSource,
dnsResCacheRRData,
dnsResCacheRRStatus,
dnsResCacheRRIndex,
dnsResCacheRRPrettyName }
STATUS current
DESCRIPTION
"A collection of objects providing access to and control
of a DNS resolver's cache."
Austein & Saperia [Page 27]
RFC 1612 DNS Resolver MIB May 1994
::= { dnsResMIBGroups 4 }
dnsResNCacheGroup OBJECT-GROUP
OBJECTS { dnsResNCacheStatus,
dnsResNCacheMaxTTL,
dnsResNCacheGoodNCaches,
dnsResNCacheBadNCaches,
dnsResNCacheErrQName,
dnsResNCacheErrQClass,
dnsResNCacheErrQType,
dnsResNCacheErrTTL,
dnsResNCacheErrElapsedTTL,
dnsResNCacheErrSource,
dnsResNCacheErrCode,
dnsResNCacheErrStatus,
dnsResNCacheErrIndex,
dnsResNCacheErrPrettyName }
STATUS current
DESCRIPTION
"A collection of objects providing access to and control
of a DNS resolver's negative response cache."
::= { dnsResMIBGroups 5 }
dnsResOptCounterGroup OBJECT-GROUP
OBJECTS { dnsResOptCounterReferals,
dnsResOptCounterRetrans,
dnsResOptCounterNoResponses,
dnsResOptCounterRootRetrans,
dnsResOptCounterInternals,
dnsResOptCounterInternalTimeOuts }
STATUS current
DESCRIPTION
"A collection of objects providing further
instrumentation applicable to many but not all DNS
resolvers."
::= { dnsResMIBGroups 6 }
-- Compliances.
dnsResMIBCompliances OBJECT IDENTIFIER ::= { dnsResMIB 3 }
dnsResMIBCompliance MODULE-COMPLIANCE
STATUS current
DESCRIPTION
"The compliance statement for agents implementing the DNS
resolver MIB extensions."
MODULE -- This MIB module
Austein & Saperia [Page 28]
RFC 1612 DNS Resolver MIB May 1994
MANDATORY-GROUPS { dnsResConfigGroup, dnsResCounterGroup }
GROUP dnsResCacheGroup
DESCRIPTION
"The resolver cache group is mandatory for resolvers that
implement a cache."
GROUP dnsResNCacheGroup
DESCRIPTION
"The resolver negative cache group is mandatory for
resolvers that implement a negative response cache."
GROUP dnsResLameDelegationGroup
DESCRIPTION
"The lame delegation group is unconditionally optional."
GROUP dnsResOptCounterGroup
DESCRIPTION
"The optional counters group is unconditionally
optional."
OBJECT dnsResConfigMaxCnames
MIN-ACCESS read-only
DESCRIPTION
"This object need not be writable."
OBJECT dnsResConfigSbeltName
MIN-ACCESS read-only
DESCRIPTION
"This object need not be writable."
OBJECT dnsResConfigSbeltRecursion
MIN-ACCESS read-only
DESCRIPTION
"This object need not be writable."
OBJECT dnsResConfigSbeltPref
MIN-ACCESS read-only
DESCRIPTION
"This object need not be writable."
OBJECT dnsResConfigReset
MIN-ACCESS read-only
DESCRIPTION
"This object need not be writable."
OBJECT dnsResCacheStatus
MIN-ACCESS read-only
DESCRIPTION
"This object need not be writable."
OBJECT dnsResCacheMaxTTL
MIN-ACCESS read-only
DESCRIPTION
"This object need not be writable."
OBJECT dnsResNCacheStatus
MIN-ACCESS read-only
DESCRIPTION
"This object need not be writable."
Austein & Saperia [Page 29]
RFC 1612 DNS Resolver MIB May 1994
OBJECT dnsResNCacheMaxTTL
MIN-ACCESS read-only
DESCRIPTION
"This object need not be writable."
::= { dnsResMIBCompliances 1 }
END
5. Acknowledgements
This document is the result of work undertaken the by DNS working
group. The authors would particularly like to thank the following
people for their contributions to this document: Philip Almquist,
Frank Kastenholz (FTP Software), Joe Peck (DEC), Dave Perkins
(SynOptics), Win Treese (DEC), and Mimi Zohar (IBM).
6. References
[1] Mockapetris, P., "Domain Names -- Concepts and Facilities", STD
13, RFC 1034, USC/Information Sciences Institute, November 1987.
[2] Mockapetris, P., "Domain Names -- Implementation and
Specification", STD 13, RFC 1035, USC/Information Sciences
Institute, November 1987.
[3] Braden, R., Editor, "Requirements for Internet Hosts --
Application and Support, STD 3, RFC 1123, USC/Information
Sciences Institute, October 1989.
[4] Rose, M., and K. McCloghrie, "Structure and Identification of
Management Information for TCP/IP-based internets", STD 16, RFC
1155, Performance Systems International, Hughes LAN Systems, May
1990.
[5] McCloghrie, K., and M. Rose, "Management Information Base for
Network Management of TCP/IP-based internets", RFC 1156, Hughes
LAN Systems, Performance Systems International, May 1990.
[6] Case, J., Fedor, M., Schoffstall, M., and J. Davin, "Simple
Network Management Protocol", STD 15, RFC 1157, SNMP Research,
Performance Systems International, Performance Systems
International, MIT Laboratory for Computer Science, May 1990.
[7] Rose, M., and K. McCloghrie, Editors, "Concise MIB Definitions",
STD 16, RFC 1212, Performance Systems International, Hughes LAN
Systems, March 1991.
Austein & Saperia [Page 30]
RFC 1612 DNS Resolver MIB May 1994
[8] McCloghrie, K., and M. Rose, "Management Information Base for
Network Management of TCP/IP-based internets: MIB-II", STD 17,
RFC 1213, Hughes LAN Systems, Performance Systems International,
March 1991.
[9] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Structure
of Management Information for version 2 of the Simple Network
Management Protocol (SNMPv2)", RFC 1442, SNMP Research, Inc.,
Hughes LAN Systems, Dover Beach Consulting, Inc., Carnegie Mellon
University, April 1993.
[10] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Textual
Conventions for version 2 of the the Simple Network Management
Protocol (SNMPv2)", RFC 1443, SNMP Research, Inc., Hughes LAN
Systems, Dover Beach Consulting, Inc., Carnegie Mellon
University, April 1993.
[11] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
"Conformance Statements for version 2 of the the Simple Network
Management Protocol (SNMPv2)", RFC 1444, SNMP Research, Inc.,
Hughes LAN Systems, Dover Beach Consulting, Inc., Carnegie Mellon
University, April 1993.
[12] Galvin, J., and K. McCloghrie, "Administrative Model for version
2 of the Simple Network Management Protocol (SNMPv2)", RFC 1445,
Trusted Information Systems, Hughes LAN Systems, April 1993.
[13] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Protocol
Operations for version 2 of the Simple Network Management
Protocol (SNMPv2)", RFC 1448, SNMP Research, Inc., Hughes LAN
Systems, Dover Beach Consulting, Inc., Carnegie Mellon
University, April 1993.
[14] "Information processing systems - Open Systems Interconnection -
Specification of Abstract Syntax Notation One (ASN.1)",
International Organization for Standardization, International
Standard 8824, December 1987.
Austein & Saperia [Page 31]
RFC 1612 DNS Resolver MIB May 1994
7. Security Considerations
Security issues are not discussed in this memo.
8. Authors' Addresses
Rob Austein
Epilogue Technology Corporation
268 Main Street, Suite 283
North Reading, MA 01864
USA
Phone: +1-617-245-0804
Fax: +1-617-245-8122
EMail: sra@epilogue.com
Jon Saperia
Digital Equipment Corporation
110 Spit Brook Road
ZKO1-3/H18
Nashua, NH 03062-2698
USA
Phone: +1-603-881-0480
Fax: +1-603-881-0120
EMail: saperia@zko.dec.com
Austein & Saperia [Page 32]