RFC5733: Extensible Provisioning Protocol (EPP) Contact Mapping

Download in PDF format Download in text format

Obsoletes:  RFC4933





Network Working Group                                      S. Hollenbeck
Request for Comments: 5733                                VeriSign, Inc.
STD: 69                                                      August 2009
Obsoletes: 4933
Category: Standards Track


         Extensible Provisioning Protocol (EPP) Contact Mapping

Abstract

   This document describes an Extensible Provisioning Protocol (EPP)
   mapping for the provisioning and management of individual or
   organizational social information identifiers (known as "contacts")
   stored in a shared central repository.  Specified in Extensible
   Markup Language (XML), the mapping defines EPP command syntax and
   semantics as applied to contacts.  This document obsoletes RFC 4933.

Status of This Memo

   This document specifies an Internet standards track protocol for the
   Internet community, and requests discussion and suggestions for
   improvements.  Please refer to the current edition of the "Internet
   Official Protocol Standards" (STD 1) for the standardization state
   and status of this protocol.  Distribution of this memo is unlimited.

Copyright Notice

   Copyright (c) 2009 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents in effect on the date of
   publication of this document (http://trustee.ietf.org/license-info).
   Please review these documents carefully, as they describe your rights
   and restrictions with respect to this document.















Hollenbeck                  Standards Track                     [Page 1]

RFC 5733                  EPP Contact Mapping                August 2009


Table of Contents

   1. Introduction ....................................................3
      1.1. Conventions Used in This Document ..........................3
   2. Object Attributes ...............................................3
      2.1. Contact and Client Identifiers .............................3
      2.2. Status Values ..............................................4
      2.3. Individual and Organizational Names ........................5
      2.4. Address ....................................................6
           2.4.1. Street, City, and State or Province .................6
           2.4.2. Postal Code .........................................6
           2.4.3. Country .............................................6
      2.5. Telephone Numbers ..........................................6
      2.6. Email Addresses ............................................6
      2.7. Dates and Times ............................................6
      2.8. Authorization Information ..................................7
      2.9. Disclosure of Data Elements and Attributes .................7
   3. EPP Command Mapping .............................................8
      3.1. EPP Query Commands .........................................8
           3.1.1. EPP <check> Command .................................9
           3.1.2. EPP <info> Command .................................11
           3.1.3. EPP <transfer> Query Command .......................14
      3.2. EPP Transform Commands ....................................16
           3.2.1. EPP <create> Command ...............................17
           3.2.2. EPP <delete> Command ...............................20
           3.2.3. EPP <renew> Command ................................21
           3.2.4. EPP <transfer> Command .............................21
           3.2.5. EPP <update> Command ...............................23
      3.3. Offline Review of Requested Actions .......................26
   4. Formal Syntax ..................................................28
   5. Internationalization Considerations ............................37
   6. IANA Considerations ............................................37
   7. Security Considerations ........................................38
   8. Acknowledgements ...............................................38
   9. References .....................................................39
      9.1. Normative References ......................................39
      9.2. Informative References ....................................40
   Appendix A.  Changes from RFC 4933 . . . . . . . . . . . . . . . . 42













Hollenbeck                  Standards Track                     [Page 2]

RFC 5733                  EPP Contact Mapping                August 2009


1.  Introduction

   This document describes a personal and organizational identifier
   mapping for version 1.0 of the Extensible Provisioning Protocol
   (EPP).  This mapping is specified using the Extensible Markup
   Language (XML) 1.0 as described in [W3C.REC-xml-20040204] and XML
   Schema notation as described in [W3C.REC-xmlschema-1-20041028] and
   [W3C.REC-xmlschema-2-20041028].  This document obsoletes RFC 4933
   [RFC4933].

   [RFC5730] provides a complete description of EPP command and response
   structures.  A thorough understanding of the base protocol
   specification is necessary to understand the mapping described in
   this document.

   XML is case sensitive.  Unless stated otherwise, XML specifications
   and examples provided in this document MUST be interpreted in the
   character case presented to develop a conforming implementation.

1.1.  Conventions Used in This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

   In examples, "C:" represents lines sent by a protocol client and "S:"
   represents lines returned by a protocol server.  Indentation and
   white space in examples are provided only to illustrate element
   relationships and are not a REQUIRED feature of this protocol.

2.  Object Attributes

   An EPP contact object has attributes and associated values that can
   be viewed and modified by the sponsoring client or the server.  This
   section describes each attribute type in detail.  The formal syntax
   for the attribute values described here can be found in the "Formal
   Syntax" section of this document and in the appropriate normative
   references.

2.1.  Contact and Client Identifiers

   All EPP contacts are identified by a server-unique identifier.
   Contact identifiers are character strings with a specified minimum
   length, a specified maximum length, and a specified format.  Contact
   identifiers use the "clIDType" client identifier syntax described in
   [RFC5730].





Hollenbeck                  Standards Track                     [Page 3]

RFC 5733                  EPP Contact Mapping                August 2009


2.2.  Status Values

   A contact object MUST always have at least one associated status
   value.  Status values can be set only by the client that sponsors a
   contact object and by the server on which the object resides.  A
   client can change the status of a contact object using the EPP
   <update> command.  Each status value MAY be accompanied by a string
   of human-readable text that describes the rationale for the status
   applied to the object.

   A client MUST NOT alter status values set by the server.  A server
   MAY alter or override status values set by a client, subject to local
   server policies.  The status of an object MAY change as a result of
   either a client-initiated transform command or an action performed by
   a server operator.

   Status values that can be added or removed by a client are prefixed
   with "client".  Corresponding status values that can be added or
   removed by a server are prefixed with "server".  Status values that
   do not begin with either "client" or "server" are server-managed.

   Status Value Descriptions:

   -  clientDeleteProhibited, serverDeleteProhibited

      Requests to delete the object MUST be rejected.

   -  clientTransferProhibited, serverTransferProhibited

      Requests to transfer the object MUST be rejected.

   -  clientUpdateProhibited, serverUpdateProhibited

      Requests to update the object (other than to remove this status)
      MUST be rejected.

   -  linked

      The contact object has at least one active association with
      another object, such as a domain object.  Servers SHOULD provide
      services to determine existing object associations.

   -  ok

      This is the normal status value for an object that has no pending
      operations or prohibitions.  This value is set and removed by the
      server as other status values are added or removed.




Hollenbeck                  Standards Track                     [Page 4]

RFC 5733                  EPP Contact Mapping                August 2009


   -  pendingCreate, pendingDelete, pendingTransfer, pendingUpdate

      A transform command has been processed for the object, but the
      action has not been completed by the server.  Server operators can
      delay action completion for a variety of reasons, such as to allow
      for human review or third-party action.  A transform command that
      is processed, but whose requested action is pending, is noted with
      response code 1001.

   When the requested action has been completed, the pendingCreate,
   pendingDelete, pendingTransfer, or pendingUpdate status value MUST be
   removed.  All clients involved in the transaction MUST be notified
   using a service message that the action has been completed and that
   the status of the object has changed.

   "ok" status MAY only be combined with "linked" status.

   "linked" status MAY be combined with any status.

   "pendingDelete" status MUST NOT be combined with either
   "clientDeleteProhibited" or "serverDeleteProhibited" status.

   "pendingTransfer" status MUST NOT be combined with either
   "clientTransferProhibited" or "serverTransferProhibited" status.
   "pendingUpdate" status MUST NOT be combined with either
   "clientUpdateProhibited" or "serverUpdateProhibited" status.

   The pendingCreate, pendingDelete, pendingTransfer, and pendingUpdate
   status values MUST NOT be combined with each other.

   Other status combinations not expressly prohibited MAY be used.

2.3.  Individual and Organizational Names

   Individual and organizational names associated with a contact are
   represented using character strings.  These strings have a specified
   minimum length and a specified maximum length.  Individual and
   organizational names MAY be provided in either UTF-8 [RFC3629] or a
   subset of UTF-8 that can be represented in 7-bit ASCII, depending on
   local needs.











Hollenbeck                  Standards Track                     [Page 5]

RFC 5733                  EPP Contact Mapping                August 2009


2.4.  Address

   Every contact has associated postal-address information.  A postal
   address contains OPTIONAL street information, city information,
   OPTIONAL state/province information, an OPTIONAL postal code, and a
   country identifier.  Address information MAY be provided in either
   UTF-8 or a subset of UTF-8 that can be represented in 7-bit ASCII,
   depending on local needs.

2.4.1.  Street, City, and State or Province

   Contact street, city, and state or province information is
   represented using character strings.  These strings have a specified
   minimum length and a specified maximum length.

2.4.2.  Postal Code

   Contact postal codes are represented using character strings.  These
   strings have a specified minimum length and a specified maximum
   length.

2.4.3.  Country

   Contact country identifiers are represented using two-character
   identifiers specified in [ISO3166-1].

2.5.  Telephone Numbers

   Contact telephone number structure is derived from structures defined
   in [ITU.E164.2005].  Telephone numbers described in this mapping are
   character strings that MUST begin with a plus sign ("+", ASCII value
   0x002B), followed by a country code defined in [ITU.E164.2005],
   followed by a dot (".", ASCII value 0x002E), followed by a sequence
   of digits representing the telephone number.  An optional "x"
   attribute is provided to note telephone extension information.

2.6.  Email Addresses

   Email address syntax is defined in [RFC5322].  This mapping does not
   prescribe minimum or maximum lengths for character strings used to
   represent email addresses.

2.7.  Dates and Times

   Date and time attribute values MUST be represented in Universal
   Coordinated Time (UTC) using the Gregorian calendar.  The extended
   date-time form using upper case "T" and "Z" characters defined in




Hollenbeck                  Standards Track                     [Page 6]

RFC 5733                  EPP Contact Mapping                August 2009


   [W3C.REC-xmlschema-2-20041028] MUST be used to represent date-time
   values, as XML Schema does not support truncated date-time forms or
   lower case "T" and "Z" characters.

2.8.  Authorization Information

   Authorization information is associated with contact objects to
   facilitate transfer operations.  Authorization information is
   assigned when a contact object is created, and it might be updated in
   the future.  This specification describes password-based
   authorization information, though other mechanisms are possible.

2.9.  Disclosure of Data Elements and Attributes

   The EPP core protocol requires a server operator to announce data-
   collection policies to clients; see Section 2.4 of [RFC5730].  In
   conjunction with this disclosure requirement, this mapping includes
   data elements that allow a client to identify elements that require
   exceptional server-operator handling to allow or restrict disclosure
   to third parties.

   A server operator announces a default disclosure policy when
   establishing a session with a client.  When an object is created or
   updated, the client can specify contact attributes that require
   exceptional disclosure handling using an OPTIONAL <contact:disclose>
   element.  Once set, disclosure preferences can be reviewed using a
   contact-information query.  A server operator MUST reject any
   transaction that requests disclosure practices that do not conform to
   the announced data-collection policy with a 2308 error response code.

   If present, the <contact:disclose> element MUST contain a "flag"
   attribute.  The "flag" attribute contains an XML Schema boolean
   value.  A value of "true" or "1" (one) notes a client preference to
   allow disclosure of the specified elements as an exception to the
   stated data-collection policy.  A value of "false" or "0" (zero)
   notes a client preference to not allow disclosure of the specified
   elements as an exception to the stated data-collection policy.

   The <contact:disclose> element MUST contain at least one of the
   following child elements:

   <contact:name type="int"/>
   <contact:name type="loc"/>
   <contact:org type="int"/>
   <contact:org type="loc"/>
   <contact:addr type="int"/>
   <contact:addr type="loc"/>




Hollenbeck                  Standards Track                     [Page 7]

RFC 5733                  EPP Contact Mapping                August 2009


   <contact:voice/>
   <contact:fax/>
   <contact:email/>

   Example <contact:disclose> element, flag="0":

   <contact:disclose flag="0">
    <contact:email/>
    <contact:voice/>
   </contact:disclose>

   In this example, the contact email address and voice telephone number
   cannot be disclosed.  All other elements are subject to disclosure in
   accordance with the server's data-collection policy.

   Example <contact:disclose> element, flag="1":

   <contact:disclose flag="1">
    <contact:name type="int"/>
    <contact:org type="int"/>
    <contact:addr type="int"/>
   </contact:disclose>

   In this example, the internationalized contact name, organization,
   and address information can be disclosed.  All other elements are
   subject to disclosure in accordance with the server's data-collection
   policy.

   Client-identification features provided by the EPP <login> command
   and contact-authorization information are used to determine if a
   client is authorized to perform contact-information query commands.
   These features also determine if a client is authorized to receive
   data that is otherwise marked for non-disclosure in a query response.

3.  EPP Command Mapping

   A detailed description of the EPP syntax and semantics can be found
   in [RFC5730].  The command mappings described here are specifically
   for use in provisioning and managing contact objects via EPP.

3.1.  EPP Query Commands

   EPP provides three commands to retrieve contact information: <check>
   to determine if a contact object can be provisioned within a
   repository, <info> to retrieve detailed information associated with a
   contact object, and <transfer> to retrieve information regarding the
   transfer status of the contact object.




Hollenbeck                  Standards Track                     [Page 8]

RFC 5733                  EPP Contact Mapping                August 2009


3.1.1.  EPP <check> Command

   The EPP <check> command is used to determine if an object can be
   provisioned within a repository.  It provides a hint that allows a
   client to anticipate the success or failure of provisioning an object
   using the <create> command, as object-provisioning requirements are
   ultimately a matter of server policy.

   In addition to the standard EPP command elements, the <check> command
   MUST contain a <contact:check> element that identifies the contact
   namespace.  The <contact:check> element contains the following child
   elements:

   -  One or more <contact:id> elements that contain the server-unique
      identifier of the contact objects to be queried.

   Example <check> command:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <check>
   C:      <contact:check
   C:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0">
   C:        <contact:id>sh8013</contact:id>
   C:        <contact:id>sah8013</contact:id>
   C:        <contact:id>8013sah</contact:id>
   C:      </contact:check>
   C:    </check>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   When a <check> command has been processed successfully, the EPP
   <resData> element MUST contain a child <contact:chkData> element that
   identifies the contact namespace.  The <contact:chkData> element
   contains one or more <contact:cd> elements that contain the following
   child elements:

   -  A <contact:id> element that identifies the queried object.  This
      element MUST contain an "avail" attribute whose value indicates
      object availability (can it be provisioned or not) at the moment
      the <check> command was completed.  A value of "1" or "true" means
      that the object can be provisioned.  A value of "0" or "false"
      means that the object cannot be provisioned.






Hollenbeck                  Standards Track                     [Page 9]

RFC 5733                  EPP Contact Mapping                August 2009


   -  An OPTIONAL <contact:reason> element that MAY be provided when an
      object cannot be provisioned.  If present, this element contains
      server-specific text to help explain why the object cannot be
      provisioned.  This text MUST be represented in the response
      language previously negotiated with the client; an OPTIONAL "lang"
      attribute MAY be present to identify the language if the
      negotiated value is something other than the default value of "en"
      (English).

   Example <check> response:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="1000">
   S:      <msg>Command completed successfully</msg>
   S:    </result>
   S:    <resData>
   S:      <contact:chkData
   S:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0">
   S:        <contact:cd>
   S:          <contact:id avail="1">sh8013</contact:id>
   S:        </contact:cd>
   S:        <contact:cd>
   S:          <contact:id avail="0">sah8013</contact:id>
   S:          <contact:reason>In use</contact:reason>
   S:        </contact:cd>
   S:        <contact:cd>
   S:          <contact:id avail="1">8013sah</contact:id>
   S:        </contact:cd>
   S:      </contact:chkData>
   S:    </resData>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54322-XYZ</svTRID>
   S:    </trID>
   S:  </response>
   S:</epp>

   An EPP error response MUST be returned if a <check> command cannot be
   processed for any reason.










Hollenbeck                  Standards Track                    [Page 10]

RFC 5733                  EPP Contact Mapping                August 2009


3.1.2.  EPP <info> Command

   The EPP <info> command is used to retrieve information associated
   with a contact object.  In addition to the standard EPP command
   elements, the <info> command MUST contain a <contact:info> element
   that identifies the contact namespace.  The <contact:info> element
   contains the following child elements:

   -  A <contact:id> element that contains the server-unique identifier
      of the contact object to be queried.

   -  An OPTIONAL <contact:authInfo> element that contains authorization
      information associated with the contact object.  If this element
      is not provided or if the authorization information is invalid,
      server policy determines if the command is rejected or if response
      information will be returned to the client.

   Example <info> command:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <info>
   C:      <contact:info
   C:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0">
   C:        <contact:id>sh8013</contact:id>
   C:        <contact:authInfo>
   C:          <contact:pw>2fooBAR</contact:pw>
   C:        </contact:authInfo>
   C:      </contact:info>
   C:    </info>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   When an <info> command has been processed successfully, the EPP
   <resData> element MUST contain a child <contact:infData> element that
   identifies the contact namespace.  The <contact:infData> element
   contains the following child elements:

   -  A <contact:id> element that contains the server-unique identifier
      of the contact object.

   -  A <contact:roid> element that contains the Repository Object
      IDentifier assigned to the contact object when the object was
      created.





Hollenbeck                  Standards Track                    [Page 11]

RFC 5733                  EPP Contact Mapping                August 2009


   -  One or more <contact:status> elements that describe the status of
      the contact object.

   -  One or two <contact:postalInfo> elements that contain postal-
      address information.  Two elements are provided so that address
      information can be provided in both internationalized and
      localized forms; a "type" attribute is used to identify the two
      forms.  If an internationalized form (type="int") is provided,
      element content MUST be represented in a subset of UTF-8 that can
      be represented in the 7-bit US-ASCII character set.  If a
      localized form (type="loc") is provided, element content MAY be
      represented in unrestricted UTF-8.  The <contact:postalInfo>
      element contains the following child elements:

      -  A <contact:name> element that contains the name of the
         individual or role represented by the contact.

      -  An OPTIONAL <contact:org> element that contains the name of the
         organization with which the contact is affiliated.

      -  A <contact:addr> element that contains address information
         associated with the contact.  A <contact:addr> element contains
         the following child elements:

         -  One, two, or three OPTIONAL <contact:street> elements that
            contain the contact's street address.

         -  A <contact:city> element that contains the contact's city.

         -  An OPTIONAL <contact:sp> element that contains the contact's
            state or province.

         -  An OPTIONAL <contact:pc> element that contains the contact's
            postal code.

         -  A <contact:cc> element that contains the contact's country
            code.

   -  An OPTIONAL <contact:voice> element that contains the contact's
      voice telephone number.

   -  An OPTIONAL <contact:fax> element that contains the contact's
      facsimile telephone number.

   -  A <contact:email> element that contains the contact's email
      address.





Hollenbeck                  Standards Track                    [Page 12]

RFC 5733                  EPP Contact Mapping                August 2009


   -  A <contact:clID> element that contains the identifier of the
      sponsoring client.

   -  A <contact:crID> element that contains the identifier of the
      client that created the contact object.

   -  A <contact:crDate> element that contains the date and time of
      contact-object creation.

   -  A <contact:upID> element that contains the identifier of the
      client that last updated the contact object.  This element MUST
      NOT be present if the contact has never been modified.

   -  A <contact:upDate> element that contains the date and time of the
      most recent contact-object modification.  This element MUST NOT be
      present if the contact object has never been modified.

   -  A <contact:trDate> element that contains the date and time of the
      most recent successful contact-object transfer.  This element MUST
      NOT be provided if the contact object has never been transferred.

   -  A <contact:authInfo> element that contains authorization
      information associated with the contact object.  This element MUST
      NOT be provided if the querying client is not the current
      sponsoring client.

   -  An OPTIONAL <contact:disclose> element that identifies elements
      that require exceptional server-operator handling to allow or
      restrict disclosure to third parties.  See Section 2.9 for a
      description of the child elements contained within the <contact:
      disclose> element.

   Example <info> response for an authorized client:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="1000">
   S:      <msg>Command completed successfully</msg>
   S:    </result>
   S:    <resData>
   S:      <contact:infData
   S:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0">
   S:        <contact:id>sh8013</contact:id>
   S:        <contact:roid>SH8013-REP</contact:roid>
   S:        <contact:status s="linked"/>
   S:        <contact:status s="clientDeleteProhibited"/>
   S:        <contact:postalInfo type="int">



Hollenbeck                  Standards Track                    [Page 13]

RFC 5733                  EPP Contact Mapping                August 2009


   S:          <contact:name>John Doe</contact:name>
   S:          <contact:org>Example Inc.</contact:org>
   S:          <contact:addr>
   S:            <contact:street>123 Example Dr.</contact:street>
   S:            <contact:street>Suite 100</contact:street>
   S:            <contact:city>Dulles</contact:city>
   S:            <contact:sp>VA</contact:sp>
   S:            <contact:pc>20166-6503</contact:pc>
   S:            <contact:cc>US</contact:cc>
   S:          </contact:addr>
   S:        </contact:postalInfo>
   S:        <contact:voice x="1234">+1.7035555555</contact:voice>
   S:        <contact:fax>+1.7035555556</contact:fax>
   S:        <contact:email>jdoe@example.com</contact:email>
   S:        <contact:clID>ClientY</contact:clID>
   S:        <contact:crID>ClientX</contact:crID>
   S:        <contact:crDate>1999-04-03T22:00:00.0Z</contact:crDate>
   S:        <contact:upID>ClientX</contact:upID>
   S:        <contact:upDate>1999-12-03T09:00:00.0Z</contact:upDate>
   S:        <contact:trDate>2000-04-08T09:00:00.0Z</contact:trDate>
   S:        <contact:authInfo>
   S:          <contact:pw>2fooBAR</contact:pw>
   S:        </contact:authInfo>
   S:        <contact:disclose flag="0">
   S:          <contact:voice/>
   S:          <contact:email/>
   S:        </contact:disclose>
   S:      </contact:infData>
   S:    </resData>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54322-XYZ</svTRID>
   S:    </trID>
   S:  </response>
   S:</epp>

   An EPP error response MUST be returned if an <info> command cannot be
   processed for any reason.

3.1.3.  EPP <transfer> Query Command

   The EPP <transfer> command provides a query operation that allows a
   client to determine the real-time status of pending and completed
   transfer requests.  In addition to the standard EPP command elements,
   the <transfer> command MUST contain an "op" attribute with value
   "query", and a <contact:transfer> element that identifies the contact
   namespace.  The <contact:transfer> element MUST contain the following
   child elements:



Hollenbeck                  Standards Track                    [Page 14]

RFC 5733                  EPP Contact Mapping                August 2009


   -  A <contact:id> element that contains the server-unique identifier
      of the contact object to be queried.

   -  An OPTIONAL <contact:authInfo> element that contains authorization
      information associated with the contact object.  If this element
      is not provided or if the authorization information is invalid,
      server policy determines if the command is rejected or if response
      information will be returned to the client.

   Example <transfer> query command:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <transfer op="query">
   C:      <contact:transfer
   C:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0">
   C:        <contact:id>sh8013</contact:id>
   C:        <contact:authInfo>
   C:          <contact:pw>2fooBAR</contact:pw>
   C:        </contact:authInfo>
   C:      </contact:transfer>
   C:    </transfer>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   When a <transfer> query command has been processed successfully, the
   EPP <resData> element MUST contain a child <contact:trnData> element
   that identifies the contact namespace.  The <contact:trnData> element
   contains the following child elements:

   -  A <contact:id> element that contains the server-unique identifier
      for the queried contact.

   -  A <contact:trStatus> element that contains the state of the most
      recent transfer request.

   -  A <contact:reID> element that contains the identifier of the
      client that requested the object transfer.

   -  A <contact:reDate> element that contains the date and time that
      the transfer was requested.

   -  A <contact:acID> element that contains the identifier of the
      client that SHOULD act upon a PENDING transfer request.  For all
      other status types, the value identifies the client that took the
      indicated action.



Hollenbeck                  Standards Track                    [Page 15]

RFC 5733                  EPP Contact Mapping                August 2009


   -  A <contact:acDate> element that contains the date and time of a
      required or completed response.  For a pending request, the value
      identifies the date and time by which a response is required
      before an automated response action SHOULD be taken by the server.
      For all other status types, the value identifies the date and time
      when the request was completed.

   Example <transfer> query response:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="1000">
   S:      <msg>Command completed successfully</msg>
   S:    </result>
   S:    <resData>
   S:      <contact:trnData
   S:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0">
   S:        <contact:id>sh8013</contact:id>
   S:        <contact:trStatus>pending</contact:trStatus>
   S:        <contact:reID>ClientX</contact:reID>
   S:        <contact:reDate>2000-06-06T22:00:00.0Z</contact:reDate>
   S:        <contact:acID>ClientY</contact:acID>
   S:        <contact:acDate>2000-06-11T22:00:00.0Z</contact:acDate>
   S:      </contact:trnData>
   S:    </resData>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54322-XYZ</svTRID>
   S:    </trID>
   S:  </response>
   S:</epp>

   An EPP error response MUST be returned if a <transfer> query command
   cannot be processed for any reason.

3.2.  EPP Transform Commands

   EPP provides four commands to transform contact-object information:
   <create> to create an instance of a contact object, <delete> to
   delete an instance of a contact object, <transfer> to manage contact-
   object sponsorship changes, and <update> to change information
   associated with a contact object.  This document does not define a
   mapping for the EPP <renew> command.

   Transform commands are typically processed and completed in real
   time.  Server operators MAY receive and process transform commands
   but defer completing the requested action if human or third-party



Hollenbeck                  Standards Track                    [Page 16]

RFC 5733                  EPP Contact Mapping                August 2009


   review is required before the requested action can be completed.  In
   such situations, the server MUST return a 1001 response code to the
   client to note that the command has been received and processed but
   that the requested action is pending.  The server MUST also manage
   the status of the object that is the subject of the command to
   reflect the initiation and completion of the requested action.  Once
   the action has been completed, all clients involved in the
   transaction MUST be notified using a service message that the action
   has been completed and that the status of the object has changed.
   Other notification methods MAY be used in addition to the required
   service message.

   Server operators SHOULD confirm that a client is authorized to
   perform a transform command on a given object.  Any attempt to
   transform an object by an unauthorized client MUST be rejected, and
   the server MUST return a 2201 response code to the client to note
   that the client lacks privileges to execute the requested command.

3.2.1.  EPP <create> Command

   The EPP <create> command provides a transform operation that allows a
   client to create a contact object.  In addition to the standard EPP
   command elements, the <create> command MUST contain a <contact:
   create> element that identifies the contact namespace.  The <contact:
   create> element contains the following child elements:

   -  A <contact:id> element that contains the desired server-unique
      identifier for the contact to be created.

   -  One or two <contact:postalInfo> elements that contain postal-
      address information.  Two elements are provided so that address
      information can be provided in both internationalized and
      localized forms; a "type" attribute is used to identify the two
      forms.  If an internationalized form (type="int") is provided,
      element content MUST be represented in a subset of UTF-8 that can
      be represented in the 7-bit US-ASCII character set.  If a
      localized form (type="loc") is provided, element content MAY be
      represented in unrestricted UTF-8.  The <contact:postalInfo>
      element contains the following child elements:

      o  A <contact:name> element that contains the name of the
         individual or role represented by the contact.

      o  An OPTIONAL <contact:org> element that contains the name of the
         organization with which the contact is affiliated.






Hollenbeck                  Standards Track                    [Page 17]

RFC 5733                  EPP Contact Mapping                August 2009


      o  A <contact:addr> element that contains address information
         associated with the contact.  A <contact:addr> element contains
         the following child elements:

         *  One, two, or three OPTIONAL <contact:street> elements that
            contain the contact's street address.

         *  A <contact:city> element that contains the contact's city.

         *  An OPTIONAL <contact:sp> element that contains the contact's
            state or province.

         *  An OPTIONAL <contact:pc> element that contains the contact's
            postal code.

         *  A <contact:cc> element that contains the contact's country
            code.

   -  An OPTIONAL <contact:voice> element that contains the contact's
      voice telephone number.

   -  An OPTIONAL <contact:fax> element that contains the contact's
      facsimile telephone number.

   -  A <contact:email> element that contains the contact's email
      address.

   -  A <contact:authInfo> element that contains authorization
      information to be associated with the contact object.  This
      mapping includes a password-based authentication mechanism, but
      the schema allows new mechanisms to be defined in new schemas.

   -  An OPTIONAL <contact:disclose> element that allows a client to
      identify elements that require exceptional server-operator
      handling to allow or restrict disclosure to third parties.  See
      Section 2.9 for a description of the child elements contained
      within the <contact:disclose> element.

   Example <create> command:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <create>
   C:      <contact:create
   C:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0">
   C:        <contact:id>sh8013</contact:id>
   C:        <contact:postalInfo type="int">



Hollenbeck                  Standards Track                    [Page 18]

RFC 5733                  EPP Contact Mapping                August 2009


   C:          <contact:name>John Doe</contact:name>
   C:          <contact:org>Example Inc.</contact:org>
   C:          <contact:addr>
   C:            <contact:street>123 Example Dr.</contact:street>
   C:            <contact:street>Suite 100</contact:street>
   C:            <contact:city>Dulles</contact:city>
   C:            <contact:sp>VA</contact:sp>
   C:            <contact:pc>20166-6503</contact:pc>
   C:            <contact:cc>US</contact:cc>
   C:          </contact:addr>
   C:        </contact:postalInfo>
   C:        <contact:voice x="1234">+1.7035555555</contact:voice>
   C:        <contact:fax>+1.7035555556</contact:fax>
   C:        <contact:email>jdoe@example.com</contact:email>
   C:        <contact:authInfo>
   C:          <contact:pw>2fooBAR</contact:pw>
   C:        </contact:authInfo>
   C:        <contact:disclose flag="0">
   C:          <contact:voice/>
   C:          <contact:email/>
   C:        </contact:disclose>
   C:      </contact:create>
   C:    </create>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   When a <create> command has been processed successfully, the EPP
   <resData> element MUST contain a child <contact:creData> element that
   identifies the contact namespace.  The <contact:creData> element
   contains the following child elements:

   -  A <contact:id> element that contains the server-unique identifier
      for the created contact.

   -  A <contact:crDate> element that contains the date and time of
      contact-object creation.

   Example <create> response:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="1000">
   S:      <msg>Command completed successfully</msg>
   S:    </result>
   S:    <resData>
   S:      <contact:creData



Hollenbeck                  Standards Track                    [Page 19]

RFC 5733                  EPP Contact Mapping                August 2009


   S:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0">
   S:        <contact:id>sh8013</contact:id>
   S:        <contact:crDate>1999-04-03T22:00:00.0Z</contact:crDate>
   S:      </contact:creData>
   S:    </resData>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54321-XYZ</svTRID>
   S:    </trID>
   S:  </response>
   S:</epp>

   An EPP error response MUST be returned if a <create> command cannot
   be processed for any reason.

3.2.2.  EPP <delete> Command

   The EPP <delete> command provides a transform operation that allows a
   client to delete a contact object.  In addition to the standard EPP
   command elements, the <delete> command MUST contain a <contact:
   delete> element that identifies the contact namespace.  The <contact:
   delete> element MUST contain the following child element:

   -  A <contact:id> element that contains the server-unique identifier
      of the contact object to be deleted.

   A contact object SHOULD NOT be deleted if it is associated with other
   known objects.  An associated contact SHOULD NOT be deleted until
   associations with other known objects have been broken.  A server
   SHOULD notify clients that object relationships exist by sending a
   2305 error response code when a <delete> command is attempted and
   fails due to existing object relationships.

   Example <delete> command:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <delete>
   C:      <contact:delete
   C:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0">
   C:        <contact:id>sh8013</contact:id>
   C:      </contact:delete>
   C:    </delete>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>




Hollenbeck                  Standards Track                    [Page 20]

RFC 5733                  EPP Contact Mapping                August 2009


   When a <delete> command has been processed successfully, a server
   MUST respond with an EPP response with no <resData> element.

   Example <delete> response:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="1000">
   S:      <msg>Command completed successfully</msg>
   S:    </result>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54321-XYZ</svTRID>
   S:    </trID>
   S:  </response>
   S:</epp>

   An EPP error response MUST be returned if a <delete> command cannot
   be processed for any reason.

3.2.3.  EPP <renew> Command

   Renewal semantics do not apply to contact objects, so there is no
   mapping defined for the EPP <renew> command.

3.2.4.  EPP <transfer> Command

   The EPP <transfer> command provides a transform operation that allows
   a client to manage requests to transfer the sponsorship of a contact
   object.  In addition to the standard EPP command elements, the
   <transfer> command MUST contain a <contact:transfer> element that
   identifies the contact namespace.  The <contact:transfer> element
   contains the following child elements:

   -  A <contact:id> element that contains the server-unique identifier
      of the contact object for which a transfer request is to be
      created, approved, rejected, or cancelled.

   -  A <contact:authInfo> element that contains authorization
      information associated with the contact object.

   Every EPP <transfer> command MUST contain an "op" attribute that
   identifies the transfer operation to be performed, as defined in
   [RFC5730].






Hollenbeck                  Standards Track                    [Page 21]

RFC 5733                  EPP Contact Mapping                August 2009


   Example <transfer> request command:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <transfer op="request">
   C:      <contact:transfer
   C:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0">
   C:        <contact:id>sh8013</contact:id>
   C:        <contact:authInfo>
   C:          <contact:pw>2fooBAR</contact:pw>
   C:        </contact:authInfo>
   C:      </contact:transfer>
   C:    </transfer>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   When a <transfer> command has been processed successfully, the EPP
   <resData> element MUST contain a child <contact:trnData> element that
   identifies the contact namespace.  The <contact:trnData> element
   contains the same child elements defined for a <transfer> query
   response.

   Example <transfer> response:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="1001">
   S:      <msg>Command completed successfully; action pending</msg>
   S:    </result>
   S:    <resData>
   S:      <contact:trnData
   S:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0">
   S:        <contact:id>sh8013</contact:id>
   S:        <contact:trStatus>pending</contact:trStatus>
   S:        <contact:reID>ClientX</contact:reID>
   S:        <contact:reDate>2000-06-08T22:00:00.0Z</contact:reDate>
   S:        <contact:acID>ClientY</contact:acID>
   S:        <contact:acDate>2000-06-13T22:00:00.0Z</contact:acDate>
   S:      </contact:trnData>
   S:    </resData>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54322-XYZ</svTRID>





Hollenbeck                  Standards Track                    [Page 22]

RFC 5733                  EPP Contact Mapping                August 2009


   S:    </trID>
   S:  </response>
   S:</epp>

   An EPP error response MUST be returned if a <transfer> command cannot
   be processed for any reason.

3.2.5.  EPP <update> Command

   The EPP <update> command provides a transform operation that allows a
   client to modify the attributes of a contact object.  In addition to
   the standard EPP command elements, the <update> command MUST contain
   a <contact:update> element that identifies the contact namespace.
   The <contact:update> element contains the following child elements:

   -  A <contact:id> element that contains the server-unique identifier
      of the contact object to be updated.

   -  An OPTIONAL <contact:add> element that contains attribute values
      to be added to the object.

   -  An OPTIONAL <contact:rem> element that contains attribute values
      to be removed from the object.

   -  An OPTIONAL <contact:chg> element that contains object attribute
      values to be changed.

   At least one <contact:add>, <contact:rem>, or <contact:chg> element
   MUST be provided if the command is not being extended.  All of these
   elements MAY be omitted if an <update> extension is present.  The
   <contact:add> and <contact:rem> elements contain the following child
   elements:

   -  One or more <contact:status> elements that contain status values
      to be associated with or removed from the object.  When specifying
      a value to be removed, only the attribute value is significant;
      element text is not required to match a value for removal.

   A <contact:chg> element contains the following OPTIONAL child
   elements.  At least one child element MUST be present:

   -  One or two <contact:postalInfo> elements that contain postal-
      address information.  Two elements are provided so that address
      information can be provided in both internationalized and
      localized forms; a "type" attribute is used to identify the two
      forms.  If an internationalized form (type="int") is provided,
      element content MUST be represented in a subset of UTF-8 that can
      be represented in the 7-bit US-ASCII character set.  If a



Hollenbeck                  Standards Track                    [Page 23]

RFC 5733                  EPP Contact Mapping                August 2009


      localized form (type="loc") is provided, element content MAY be
      represented in unrestricted UTF-8.  The <contact:postalInfo>
      element contains the following OPTIONAL child elements:

      o  A <contact:name> element that contains the name of the
         individual or role represented by the contact.

      o  A <contact:org> element that contains the name of the
         organization with which the contact is affiliated.

      o  A <contact:addr> element that contains address information
         associated with the contact.  A <contact:addr> element contains
         the following child elements:

         *  One, two, or three OPTIONAL <contact:street> elements that
            contain the contact's street address.

         *  A <contact:city> element that contains the contact's city.

         *  An OPTIONAL <contact:sp> element that contains the contact's
            state or province.

         *  An OPTIONAL <contact:pc> element that contains the contact's
            postal code.

         *  A <contact:cc> element that contains the contact's country
            code.

   -  A <contact:voice> element that contains the contact's voice
      telephone number.

   -  A <contact:fax> element that contains the contact's facsimile
      telephone number.

   -  A <contact:email> element that contains the contact's email
      address.

   -  A <contact:authInfo> element that contains authorization
      information associated with the contact object.  This mapping
      includes a password-based authentication mechanism, but the schema
      allows new mechanisms to be defined in new schemas.

   -  A <contact:disclose> element that allows a client to identify
      elements that require exceptional server-operator handling to
      allow or restrict disclosure to third parties.  See Section 2.9
      for a description of the child elements contained within the
      <contact:disclose> element.




Hollenbeck                  Standards Track                    [Page 24]

RFC 5733                  EPP Contact Mapping                August 2009


   Example <update> command:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <update>
   C:      <contact:update
   C:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0">
   C:        <contact:id>sh8013</contact:id>
   C:        <contact:add>
   C:          <contact:status s="clientDeleteProhibited"/>
   C:        </contact:add>
   C:        <contact:chg>
   C:          <contact:postalInfo type="int">
   C:            <contact:org/>
   C:            <contact:addr>
   C:              <contact:street>124 Example Dr.</contact:street>
   C:              <contact:street>Suite 200</contact:street>
   C:              <contact:city>Dulles</contact:city>
   C:              <contact:sp>VA</contact:sp>
   C:              <contact:pc>20166-6503</contact:pc>
   C:              <contact:cc>US</contact:cc>
   C:            </contact:addr>
   C:          </contact:postalInfo>
   C:          <contact:voice>+1.7034444444</contact:voice>
   C:          <contact:fax/>
   C:          <contact:authInfo>
   C:            <contact:pw>2fooBAR</contact:pw>
   C:          </contact:authInfo>
   C:          <contact:disclose flag="1">
   C:            <contact:voice/>
   C:            <contact:email/>
   C:          </contact:disclose>
   C:        </contact:chg>
   C:      </contact:update>
   C:    </update>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   When an <update> command has been processed successfully, a server
   MUST respond with an EPP response with no <resData> element.

   Example <update> response:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>



Hollenbeck                  Standards Track                    [Page 25]

RFC 5733                  EPP Contact Mapping                August 2009


   S:    <result code="1000">
   S:      <msg>Command completed successfully</msg>
   S:    </result>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54321-XYZ</svTRID>
   S:    </trID>
   S:  </response>
   S:</epp>

   An EPP error response MUST be returned if an <update> command cannot
   be processed for any reason.

3.3.  Offline Review of Requested Actions

   Commands are processed by a server in the order they are received
   from a client.  Though an immediate response confirming receipt and
   processing of the command is produced by the server, a server
   operator MAY perform an offline review of requested transform
   commands before completing the requested action.  In such situations,
   the response from the server MUST clearly note that the transform
   command has been received and processed but that the requested action
   is pending.  The status of the corresponding object MUST clearly
   reflect processing of the pending action.  The server MUST notify the
   client when offline processing of the action has been completed.

   Examples describing a <create> command that requires offline review
   are included here.  Note the result code and message returned in
   response to the <create> command.

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="1001">
   S:      <msg>Command completed successfully; action pending</msg>
   S:    </result>
   S:    <resData>
   S:      <contact:creData
   S:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0">
   S:        <contact:id>sh8013</contact:id>
   S:        <contact:crDate>1999-04-03T22:00:00.0Z</contact:crDate>
   S:      </contact:creData>
   S:    </resData>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54321-XYZ</svTRID>





Hollenbeck                  Standards Track                    [Page 26]

RFC 5733                  EPP Contact Mapping                August 2009


   S:    </trID>
   S:  </response>
   S:</epp>

   The status of the contact object after returning this response MUST
   include "pendingCreate".  The server operator reviews the request
   offline and informs the client of the outcome of the review either by
   queuing a service message for retrieval via the <poll> command or by
   using an out-of-band mechanism to inform the client of the request.

   The service message MUST contain text that describes the notification
   in the child <msg> element of the response <msgQ> element.  In
   addition, the EPP <resData> element MUST contain a child <contact:
   panData> element that identifies the contact namespace.  The
   <contact:panData> element contains the following child elements:

   -  A <contact:id> element that contains the server-unique identifier
      of the contact object.  The <contact:id> element contains a
      REQUIRED "paResult" attribute.  A positive boolean value indicates
      that the request has been approved and completed.  A negative
      boolean value indicates that the request has been denied and the
      requested action has not been taken.

   -  A <contact:paTRID> element that contains the client transaction
      identifier and server transaction identifier returned with the
      original response to process the command.  The client transaction
      identifier is OPTIONAL and will only be returned if the client
      provided an identifier with the original <create> command.

   -  A <contact:paDate> element that contains the date and time
      describing when review of the requested action was completed.

   Example "review completed" service message:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="1301">
   S:      <msg>Command completed successfully; ack to dequeue</msg>
   S:    </result>
   S:    <msgQ count="5" id="12345">
   S:      <qDate>1999-04-04T22:01:00.0Z</qDate>
   S:      <msg>Pending action completed successfully.</msg>
   S:    </msgQ>
   S:    <resData>
   S:      <contact:panData
   S:       xmlns:contact="urn:ietf:params:xml:ns:contact-1.0">
   S:        <contact:id paResult="1">sh8013</contact:id>



Hollenbeck                  Standards Track                    [Page 27]

RFC 5733                  EPP Contact Mapping                August 2009


   S:        <contact:paTRID>
   S:          <clTRID>ABC-12345</clTRID>
   S:          <svTRID>54321-XYZ</svTRID>
   S:        </contact:paTRID>
   S:        <contact:paDate>1999-04-04T22:00:00.0Z</contact:paDate>
   S:      </contact:panData>
   S:    </resData>
   S:    <trID>
   S:      <clTRID>BCD-23456</clTRID>
   S:      <svTRID>65432-WXY</svTRID>
   S:    </trID>
   S:  </response>
   S:</epp>

4.  Formal Syntax

   An EPP object mapping is specified in XML Schema notation.  The
   formal syntax presented here is a complete schema representation of
   the object mapping suitable for automated validation of EPP XML
   instances.  The BEGIN and END tags are not part of the schema; they
   are used to note the beginning and ending of the schema for URI
   registration purposes.

   Copyright (c) 2009 IETF Trust and the persons identified as authors
   of the code.  All rights reserved.

   Redistribution and use in source and binary forms, with or without
   modification, are permitted provided that the following conditions
   are met:

   o  Redistributions of source code must retain the above copyright
      notice, this list of conditions and the following disclaimer.

   o  Redistributions in binary form must reproduce the above copyright
      notice, this list of conditions and the following disclaimer in
      the documentation and/or other materials provided with the
      distribution.

   o  Neither the name of Internet Society, IETF or IETF Trust, nor the
      names of specific contributors, may be used to endorse or promote
      products derived from this software without specific prior written
      permission.

   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
   A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE COPYRIGHT
   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,



Hollenbeck                  Standards Track                    [Page 28]

RFC 5733                  EPP Contact Mapping                August 2009


   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

   BEGIN
   <?xml version="1.0" encoding="UTF-8"?>

   <schema targetNamespace="urn:ietf:params:xml:ns:contact-1.0"
          xmlns:contact="urn:ietf:params:xml:ns:contact-1.0"
          xmlns:epp="urn:ietf:params:xml:ns:epp-1.0"
          xmlns:eppcom="urn:ietf:params:xml:ns:eppcom-1.0"
          xmlns="http://www.w3.org/2001/XMLSchema"
          elementFormDefault="qualified">

   <!--
   Import common element types.
   -->
    <import namespace="urn:ietf:params:xml:ns:eppcom-1.0"/>
    <import namespace="urn:ietf:params:xml:ns:epp-1.0"/>

    <annotation>
      <documentation>
        Extensible Provisioning Protocol v1.0
        contact provisioning schema.
      </documentation>
    </annotation>

   <!--
   Child elements found in EPP commands.
   -->
    <element name="check" type="contact:mIDType"/>
    <element name="create" type="contact:createType"/>
    <element name="delete" type="contact:sIDType"/>
    <element name="info" type="contact:authIDType"/>
    <element name="transfer" type="contact:authIDType"/>
    <element name="update" type="contact:updateType"/>

   <!--
   Utility types.
   -->
    <simpleType name="ccType">
      <restriction base="token">
        <length value="2"/>
      </restriction>
    </simpleType>



Hollenbeck                  Standards Track                    [Page 29]

RFC 5733                  EPP Contact Mapping                August 2009


    <complexType name="e164Type">
      <simpleContent>
        <extension base="contact:e164StringType">
          <attribute name="x" type="token"/>
        </extension>
      </simpleContent>
    </complexType>

    <simpleType name="e164StringType">
      <restriction base="token">
        <pattern value="(\+[0-9]{1,3}\.[0-9]{1,14})?"/>
        <maxLength value="17"/>
      </restriction>
    </simpleType>

    <simpleType name="pcType">
      <restriction base="token">
        <maxLength value="16"/>
      </restriction>
    </simpleType>

    <simpleType name="postalLineType">
       <restriction base="normalizedString">
         <minLength value="1"/>
         <maxLength value="255"/>
       </restriction>
    </simpleType>

    <simpleType name="optPostalLineType">
       <restriction base="normalizedString">
         <maxLength value="255"/>
       </restriction>
    </simpleType>

   <!--
   Child elements of the <create> command.
   -->
    <complexType name="createType">
      <sequence>
        <element name="id" type="eppcom:clIDType"/>
        <element name="postalInfo" type="contact:postalInfoType"
         maxOccurs="2"/>
        <element name="voice" type="contact:e164Type"
         minOccurs="0"/>
        <element name="fax" type="contact:e164Type"
         minOccurs="0"/>
        <element name="email" type="eppcom:minTokenType"/>
        <element name="authInfo" type="contact:authInfoType"/>



Hollenbeck                  Standards Track                    [Page 30]

RFC 5733                  EPP Contact Mapping                August 2009


        <element name="disclose" type="contact:discloseType"
         minOccurs="0"/>
      </sequence>
    </complexType>

    <complexType name="postalInfoType">
      <sequence>
        <element name="name" type="contact:postalLineType"/>
        <element name="org" type="contact:optPostalLineType"
         minOccurs="0"/>
        <element name="addr" type="contact:addrType"/>
      </sequence>
      <attribute name="type" type="contact:postalInfoEnumType"
       use="required"/>
    </complexType>

    <simpleType name="postalInfoEnumType">
      <restriction base="token">
        <enumeration value="loc"/>
        <enumeration value="int"/>
      </restriction>
    </simpleType>

    <complexType name="addrType">
      <sequence>
        <element name="street" type="contact:optPostalLineType"
         minOccurs="0" maxOccurs="3"/>
        <element name="city" type="contact:postalLineType"/>
        <element name="sp" type="contact:optPostalLineType"
         minOccurs="0"/>
        <element name="pc" type="contact:pcType"
         minOccurs="0"/>
        <element name="cc" type="contact:ccType"/>
      </sequence>
    </complexType>

    <complexType name="authInfoType">
      <choice>
        <element name="pw" type="eppcom:pwAuthInfoType"/>
        <element name="ext" type="eppcom:extAuthInfoType"/>
      </choice>
    </complexType>

    <complexType name="discloseType">
      <sequence>
        <element name="name" type="contact:intLocType"
         minOccurs="0" maxOccurs="2"/>
        <element name="org" type="contact:intLocType"



Hollenbeck                  Standards Track                    [Page 31]

RFC 5733                  EPP Contact Mapping                August 2009


         minOccurs="0" maxOccurs="2"/>
        <element name="addr" type="contact:intLocType"
         minOccurs="0" maxOccurs="2"/>
        <element name="voice" minOccurs="0"/>
        <element name="fax" minOccurs="0"/>
        <element name="email" minOccurs="0"/>
      </sequence>
      <attribute name="flag" type="boolean" use="required"/>
    </complexType>

    <complexType name="intLocType">
      <attribute name="type" type="contact:postalInfoEnumType"
       use="required"/>
    </complexType>

   <!--
   Child element of commands that require only an identifier.
   -->
    <complexType name="sIDType">
      <sequence>
        <element name="id" type="eppcom:clIDType"/>
      </sequence>
    </complexType>

   <!--
   Child element of commands that accept multiple identifiers.
   -->
    <complexType name="mIDType">
      <sequence>
        <element name="id" type="eppcom:clIDType"
         maxOccurs="unbounded"/>
      </sequence>
    </complexType>

   <!--
   Child elements of the <info> and <transfer> commands.
   -->
    <complexType name="authIDType">
      <sequence>
        <element name="id" type="eppcom:clIDType"/>
        <element name="authInfo" type="contact:authInfoType"
         minOccurs="0"/>
      </sequence>
    </complexType>

   <!--
   Child elements of the <update> command.
   -->



Hollenbeck                  Standards Track                    [Page 32]

RFC 5733                  EPP Contact Mapping                August 2009


    <complexType name="updateType">
      <sequence>
        <element name="id" type="eppcom:clIDType"/>
        <element name="add" type="contact:addRemType"
         minOccurs="0"/>
        <element name="rem" type="contact:addRemType"
         minOccurs="0"/>
        <element name="chg" type="contact:chgType"
         minOccurs="0"/>
      </sequence>
    </complexType>

   <!--
   Data elements that can be added or removed.
   -->
    <complexType name="addRemType">
      <sequence>
        <element name="status" type="contact:statusType"
         maxOccurs="7"/>
      </sequence>
    </complexType>

   <!--
   Data elements that can be changed.
   -->
    <complexType name="chgType">
      <sequence>
        <element name="postalInfo" type="contact:chgPostalInfoType"
         minOccurs="0" maxOccurs="2"/>
        <element name="voice" type="contact:e164Type"
         minOccurs="0"/>
        <element name="fax" type="contact:e164Type"
         minOccurs="0"/>
        <element name="email" type="eppcom:minTokenType"
         minOccurs="0"/>
        <element name="authInfo" type="contact:authInfoType"
         minOccurs="0"/>
        <element name="disclose" type="contact:discloseType"
         minOccurs="0"/>
      </sequence>
    </complexType>

    <complexType name="chgPostalInfoType">
      <sequence>
        <element name="name" type="contact:postalLineType"
         minOccurs="0"/>
        <element name="org" type="contact:optPostalLineType"
         minOccurs="0"/>



Hollenbeck                  Standards Track                    [Page 33]

RFC 5733                  EPP Contact Mapping                August 2009


        <element name="addr" type="contact:addrType"
         minOccurs="0"/>
      </sequence>
      <attribute name="type" type="contact:postalInfoEnumType"
       use="required"/>
    </complexType>

   <!--
   Child response elements.
   -->
    <element name="chkData" type="contact:chkDataType"/>
    <element name="creData" type="contact:creDataType"/>
    <element name="infData" type="contact:infDataType"/>
    <element name="panData" type="contact:panDataType"/>
    <element name="trnData" type="contact:trnDataType"/>

   <!--
   <check> response elements.
   -->
    <complexType name="chkDataType">
      <sequence>
        <element name="cd" type="contact:checkType"
         maxOccurs="unbounded"/>
      </sequence>
    </complexType>

    <complexType name="checkType">
      <sequence>
        <element name="id" type="contact:checkIDType"/>
        <element name="reason" type="eppcom:reasonType"
         minOccurs="0"/>
      </sequence>
    </complexType>

    <complexType name="checkIDType">
      <simpleContent>
        <extension base="eppcom:clIDType">
          <attribute name="avail" type="boolean"
           use="required"/>
        </extension>
      </simpleContent>
    </complexType>

   <!--
   <create> response elements.
   -->
    <complexType name="creDataType">
      <sequence>



Hollenbeck                  Standards Track                    [Page 34]

RFC 5733                  EPP Contact Mapping                August 2009


        <element name="id" type="eppcom:clIDType"/>
        <element name="crDate" type="dateTime"/>
      </sequence>
    </complexType>

   <!--
   <info> response elements.
   -->
    <complexType name="infDataType">
      <sequence>
        <element name="id" type="eppcom:clIDType"/>
        <element name="roid" type="eppcom:roidType"/>
        <element name="status" type="contact:statusType"
         maxOccurs="7"/>
        <element name="postalInfo" type="contact:postalInfoType"
         maxOccurs="2"/>
        <element name="voice" type="contact:e164Type"
         minOccurs="0"/>
        <element name="fax" type="contact:e164Type"
         minOccurs="0"/>
        <element name="email" type="eppcom:minTokenType"/>
        <element name="clID" type="eppcom:clIDType"/>
        <element name="crID" type="eppcom:clIDType"/>
        <element name="crDate" type="dateTime"/>
        <element name="upID" type="eppcom:clIDType"
         minOccurs="0"/>
        <element name="upDate" type="dateTime"
         minOccurs="0"/>
        <element name="trDate" type="dateTime"
         minOccurs="0"/>
        <element name="authInfo" type="contact:authInfoType"
         minOccurs="0"/>
        <element name="disclose" type="contact:discloseType"
         minOccurs="0"/>
      </sequence>
    </complexType>

   <!--
   Status is a combination of attributes and an optional human-readable
   message that may be expressed in languages other than English.
   -->
    <complexType name="statusType">
      <simpleContent>
        <extension base="normalizedString">
          <attribute name="s" type="contact:statusValueType"
           use="required"/>
          <attribute name="lang" type="language"
           default="en"/>



Hollenbeck                  Standards Track                    [Page 35]

RFC 5733                  EPP Contact Mapping                August 2009


        </extension>
      </simpleContent>
    </complexType>

    <simpleType name="statusValueType">
      <restriction base="token">
        <enumeration value="clientDeleteProhibited"/>
        <enumeration value="clientTransferProhibited"/>
        <enumeration value="clientUpdateProhibited"/>
        <enumeration value="linked"/>
        <enumeration value="ok"/>
        <enumeration value="pendingCreate"/>
        <enumeration value="pendingDelete"/>
        <enumeration value="pendingTransfer"/>
        <enumeration value="pendingUpdate"/>
        <enumeration value="serverDeleteProhibited"/>
        <enumeration value="serverTransferProhibited"/>
        <enumeration value="serverUpdateProhibited"/>
      </restriction>
    </simpleType>

   <!--
   Pending action notification response elements.
   -->
    <complexType name="panDataType">
      <sequence>
        <element name="id" type="contact:paCLIDType"/>
        <element name="paTRID" type="epp:trIDType"/>
        <element name="paDate" type="dateTime"/>
      </sequence>
    </complexType>

    <complexType name="paCLIDType">
      <simpleContent>
        <extension base="eppcom:clIDType">
          <attribute name="paResult" type="boolean"
           use="required"/>
        </extension>
      </simpleContent>
    </complexType>

   <!--
   <transfer> response elements.
   -->
    <complexType name="trnDataType">
      <sequence>
        <element name="id" type="eppcom:clIDType"/>
        <element name="trStatus" type="eppcom:trStatusType"/>



Hollenbeck                  Standards Track                    [Page 36]

RFC 5733                  EPP Contact Mapping                August 2009


        <element name="reID" type="eppcom:clIDType"/>
        <element name="reDate" type="dateTime"/>
        <element name="acID" type="eppcom:clIDType"/>
        <element name="acDate" type="dateTime"/>
      </sequence>
    </complexType>

   <!--
   End of schema.
   -->
   </schema>
   END

5.  Internationalization Considerations

   EPP is represented in XML, which provides native support for encoding
   information using the Unicode character set and its more compact
   representations including UTF-8.  Conformant XML processors recognize
   both UTF-8 and UTF-16 [RFC2781].  Though XML includes provisions to
   identify and use other character encodings through use of an
   "encoding" attribute in an <?xml?> declaration, use of UTF-8 is
   RECOMMENDED in environments where parser encoding support
   incompatibility exists.

   All date-time values presented via EPP MUST be expressed in Universal
   Coordinated Time using the Gregorian calendar.  The XML Schema allows
   use of time zone identifiers to indicate offsets from the zero
   meridian, but this option MUST NOT be used with EPP.  The extended
   date-time form using upper case "T" and "Z" characters defined in
   [W3C.REC-xmlschema-2-20041028] MUST be used to represent date-time
   values, as the XML Schema does not support truncated date-time forms
   or lower case "T" and "Z" characters.

   Humans, organizations, and other entities often need to represent
   social information in both a commonly understood character set and a
   locally optimized character set.  This specification provides
   features allowing representation of social information in both a
   subset of UTF-8 for broad readability and unrestricted UTF-8 for
   local optimization.

6.  IANA Considerations

   This document uses URNs to describe XML namespaces and XML schemas
   conforming to a registry mechanism described in [RFC3688].  Two URI
   assignments have been registered by the IANA.






Hollenbeck                  Standards Track                    [Page 37]

RFC 5733                  EPP Contact Mapping                August 2009


   Registration request for the contact namespace:

      URI: urn:ietf:params:xml:ns:contact-1.0

      Registrant Contact: See the "Author's Address" section of this
      document.

      XML: None.  Namespace URIs do not represent an XML specification.

   Registration request for the contact XML schema:

      URI: urn:ietf:params:xml:schema:contact-1.0

      Registrant Contact: See the "Author's Address" section of this
      document.

      XML: See the "Formal Syntax" section of this document.

7.  Security Considerations

   Authorization information as described in Section 2.8 is REQUIRED to
   create a contact object.  This information is used in some query and
   transfer operations as an additional means of determining client
   authorization to perform the command.  Failure to protect
   authorization information from inadvertent disclosure can result in
   unauthorized transfer operations and unauthorized information
   release.  Both client and server MUST ensure that authorization
   information is stored and exchanged with high-grade encryption
   mechanisms to provide privacy services.

   The object mapping described in this document does not provide any
   other security services or introduce any additional considerations
   beyond those described by [RFC5730] or those caused by the protocol
   layers used by EPP.

8.  Acknowledgements

   RFC 3733 is a product of the PROVREG working group, which suggested
   improvements and provided many invaluable comments.  The author
   wishes to acknowledge the efforts of WG chairs Edward Lewis and Jaap
   Akkerhuis for their process and editorial contributions.  RFC 4933
   and this document are individual submissions, based on the work done
   in RFC 3733.








Hollenbeck                  Standards Track                    [Page 38]

RFC 5733                  EPP Contact Mapping                August 2009


   Specific suggestions that have been incorporated into this document
   were provided by Chris Bason, Eric Brunner-Williams, Jordyn Buchanan,
   Robert Burbidge, Dave Crocker, Ayesha Damaraju, Anthony Eden, Sheer
   El-Showk, Dipankar Ghosh, Klaus Malorny, Dan Manley, Michael
   Mealling, Patrick Mevzek, Asbjorn Steira, and Rick Wesson.

9.  References

9.1.  Normative References

   [ISO3166-1]
              International Organization for Standardization, "Codes for
              the representation of names of countries and their
              subdivisions -- Part 1: Country codes", ISO Standard 3166,
              November 2006.

   [ITU.E164.2005]
              International Telecommunication Union, "The international
              public telecommunication numbering plan", ITU-
              T Recommendation E.164, February 2005.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC3629]  Yergeau, F., "UTF-8, a transformation format of ISO
              10646", STD 63, RFC 3629, November 2003.

   [RFC3688]  Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
              January 2004.

   [RFC5322]  Resnick, P., Ed., "Internet Message Format", RFC 5322,
              October 2008.

   [RFC5730]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)",
              STD 69, RFC 5730, August 2009.

   [W3C.REC-xml-20040204]
              Sperberg-McQueen, C., Maler, E., Yergeau, F., Paoli, J.,
              and T. Bray, "Extensible Markup Language (XML) 1.0 (Third
              Edition)", World Wide Web Consortium FirstEdition REC-xml-
              20040204, February 2004,
              <http://www.w3.org/TR/2004/REC-xml-20040204>.









Hollenbeck                  Standards Track                    [Page 39]

RFC 5733                  EPP Contact Mapping                August 2009


   [W3C.REC-xmlschema-1-20041028]
              Maloney, M., Thompson, H., Mendelsohn, N., and D. Beech,
              "XML Schema Part 1: Structures Second Edition", World Wide
              Web Consortium Recommendation REC-xmlschema-1-20041028,
              October 2004,
              <http://www.w3.org/TR/2004/REC-xmlschema-1-20041028>.

   [W3C.REC-xmlschema-2-20041028]
              Malhotra, A. and P. Biron, "XML Schema Part 2: Datatypes
              Second Edition", World Wide Web Consortium
              Recommendation REC-xmlschema-2-20041028, October 2004,
              <http://www.w3.org/TR/2004/REC-xmlschema-2-20041028>.

9.2.  Informative References

   [RFC2781]  Hoffman, P. and F. Yergeau, "UTF-16, an encoding of ISO
              10646", RFC 2781, February 2000.

   [RFC4933]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)
              Contact Mapping", RFC 4933, May 2007.































Hollenbeck                  Standards Track                    [Page 40]

RFC 5733                  EPP Contact Mapping                August 2009


Appendix A.  Changes from RFC 4933

   1.   Changed "This document obsoletes RFC 3733" to "This document
        obsoletes RFC 4933".

   2.   Replaced references to RFC 0822 with references to 5322.

   3.   Replaced references to RFC 3733 with references to 4933.

   4.   Replaced references to RFC 4930 with references to 5730.

   5.   Updated reference to ISO 3166-1.

   6.   Removed pendingRenew status from Section 2.2 because this
        document does not define a mapping for the EPP <renew> command.

   7.   Modified text in Section 3.2.2 to include 2305 response code.

   8.   Updated Section 5.

   9.   Added "Other notification methods MAY be used in addition to the
        required service message" in Section 3.2.

   10.  Added 2201 response code text in Section 3.2.

   11.  Added BSD license text to XML schema section.

Author's Address

   Scott Hollenbeck
   VeriSign, Inc.
   21345 Ridgetop Circle
   Dulles, VA  20166-6503
   US

   EMail: shollenbeck@verisign.com















Hollenbeck                  Standards Track                    [Page 41]