RFC6578: Collection Synchronization for Web Distributed Authoring and Versioning (WebDAV)
Download in PDF format Download in text format
Related keywords:
(sync-collection)
(sync-token)
Internet Engineering Task Force (IETF) C. Daboo
Request for Comments: 6578 Apple Inc.
Category: Standards Track A. Quillaud
ISSN: 2070-1721 Oracle
March 2012
Collection Synchronization
for Web Distributed Authoring and Versioning (WebDAV)
Abstract
This specification defines an extension to Web Distributed Authoring
and Versioning (WebDAV) that allows efficient synchronization of the
contents of a WebDAV collection.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 5741.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc6578.
Daboo & Quillaud Standards Track [Page 1]
RFC 6578 WebDAV Sync March 2012
Copyright Notice
Copyright (c) 2012 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
This document may contain material from IETF Documents or IETF
Contributions published or made publicly available before November
10, 2008. The person(s) controlling the copyright in some of this
material may not have granted the IETF Trust the right to allow
modifications of such material outside the IETF Standards Process.
Without obtaining an adequate license from the person(s) controlling
the copyright in such materials, this document may not be modified
outside the IETF Standards Process, and derivative works of it may
not be created outside the IETF Standards Process, except to format
it for publication as an RFC or to translate it into languages other
than English.
Daboo & Quillaud Standards Track [Page 2]
RFC 6578 WebDAV Sync March 2012
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4
2. Conventions Used in This Document . . . . . . . . . . . . . . 4
3. WebDAV Synchronization . . . . . . . . . . . . . . . . . . . . 5
3.1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . 5
3.2. DAV:sync-collection Report . . . . . . . . . . . . . . . . 6
3.3. Depth Behavior . . . . . . . . . . . . . . . . . . . . . . 8
3.4. Types of Changes Reported on Initial Synchronization . . . 9
3.5. Types of Changes Reported on Subsequent
Synchronizations . . . . . . . . . . . . . . . . . . . . . 10
3.5.1. Changed Member . . . . . . . . . . . . . . . . . . . . 10
3.5.2. Removed Member . . . . . . . . . . . . . . . . . . . . 10
3.6. Truncation of Results . . . . . . . . . . . . . . . . . . 11
3.7. Limiting Results . . . . . . . . . . . . . . . . . . . . . 12
3.8. Example: Initial DAV:sync-collection Report . . . . . . . 12
3.9. Example: DAV:sync-collection Report with Token . . . . . . 14
3.10. Example: Initial DAV:sync-collection Report with
Truncation . . . . . . . . . . . . . . . . . . . . . . . . 16
3.11. Example: Initial DAV:sync-collection Report with Limit . . 17
3.12. Example: DAV:sync-collection Report with Unsupported
Limit . . . . . . . . . . . . . . . . . . . . . . . . . . 18
3.13. Example: DAV:sync-level Set to Infinite, Initial
DAV:sync-collection Report . . . . . . . . . . . . . . . . 19
4. DAV:sync-token Property . . . . . . . . . . . . . . . . . . . 22
5. DAV:sync-token Use with If Header . . . . . . . . . . . . . . 22
5.1. Example: If Precondition with PUT . . . . . . . . . . . . 22
5.2. Example: If Precondition with MKCOL . . . . . . . . . . . 23
6. XML Element Definitions . . . . . . . . . . . . . . . . . . . 24
6.1. DAV:sync-collection XML Element . . . . . . . . . . . . . 24
6.2. DAV:sync-token XML Element . . . . . . . . . . . . . . . . 24
6.3. DAV:sync-level XML Element . . . . . . . . . . . . . . . . 24
6.4. DAV:multistatus XML Element . . . . . . . . . . . . . . . 25
7. Security Considerations . . . . . . . . . . . . . . . . . . . 25
8. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 25
9. References . . . . . . . . . . . . . . . . . . . . . . . . . . 25
9.1. Normative References . . . . . . . . . . . . . . . . . . . 25
9.2. Informative References . . . . . . . . . . . . . . . . . . 26
Appendix A. Backwards-Compatible Handling of Depth . . . . . . . 27
Appendix B. Example of a Client Synchronization Approach . . . . 27
Daboo & Quillaud Standards Track [Page 3]
RFC 6578 WebDAV Sync March 2012
1. Introduction
WebDAV [RFC4918] defines the concept of 'collections', which are
hierarchical groupings of WebDAV resources on an HTTP [RFC2616]
server. Collections can be of arbitrary size and depth (i.e.,
collections within collections). WebDAV clients that cache resource
content need a way to synchronize that data with the server (i.e.,
detect what has changed and update their cache). Currently, this can
be done using a WebDAV PROPFIND request on a collection to list all
members of a collection along with their DAV:getetag property values,
which allows the client to determine which were changed, added, or
deleted. However, this does not scale well to large collections, as
the XML response to the PROPFIND request will grow with the
collection size.
This specification defines a new WebDAV report that results in the
server returning to the client only information about those member
URLs that were added or deleted, or whose mapped resources were
changed, since a previous execution of the report on the collection.
Additionally, a new property is added to collection resources that is
used to convey a "synchronization token" that is guaranteed to change
when the collection's member URLs or their mapped resources have
changed.
2. Conventions Used in This Document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in [RFC2119].
This document uses XML DTD fragments ([W3C.REC-xml-20081126], Section
3.2) as a purely notational convention. WebDAV request and response
bodies cannot be validated by a DTD due to the specific extensibility
rules defined in Section 17 of [RFC4918] and due to the fact that all
XML elements defined by this specification use the XML namespace name
"DAV:". In particular:
1. Element names use the "DAV:" namespace.
2. Element ordering is irrelevant unless explicitly stated
otherwise.
3. Extension elements (elements not already defined as valid child
elements) may be added anywhere, except when explicitly stated
otherwise.
Daboo & Quillaud Standards Track [Page 4]
RFC 6578 WebDAV Sync March 2012
4. Extension attributes (attributes not already defined as valid for
this element) may be added anywhere, except when explicitly
stated otherwise.
When an XML element type in the "DAV:" namespace is referenced in
this document outside of the context of an XML fragment, the string
"DAV:" will be prefixed to the element type.
This document inherits, and sometimes extends, DTD productions from
Section 14 of [RFC4918].
3. WebDAV Synchronization
3.1. Overview
One way to synchronize data between two entities is to use some form
of synchronization token. The token defines the state of the data
being synchronized at a particular point in time. It can then be
used to determine what has changed between one point in time and
another.
This specification defines a new WebDAV report that is used to enable
client-server collection synchronization based on such a token.
In order to synchronize the contents of a collection between a server
and client, the server provides the client with a synchronization
token each time the synchronization report is executed. That token
represents the state of the data being synchronized at that point in
time. The client can then present that same token back to the server
at some later time, and the server will return only those items that
are new, have changed, or were deleted since that token was
generated. The server also returns a new token representing the new
state at the time the report was run.
Typically, the first time a client connects to the server it will
need to be informed of the entire state of the collection (i.e., a
full list of all member URLs that are currently in the collection).
That is done by the client sending an empty token value to the
server. This indicates to the server that a full listing is
required.
As an alternative, the client might choose to do its first
synchronization using some other mechanism on the collection (e.g.,
some other form of batch resource information retrieval such as
PROPFIND, SEARCH [RFC5323], or specialized REPORTs such as those
defined in CalDAV [RFC4791] and CardDAV [RFC6352]) and ask for the
Daboo & Quillaud Standards Track [Page 5]
RFC 6578 WebDAV Sync March 2012
DAV:sync-token property to be returned. This property (defined in
Section 4) contains the same token that can be used later to issue a
DAV:sync-collection report.
In some cases, a server might only wish to maintain a limited amount
of history about changes to a collection. In that situation, it will
return an error to the client when the client presents a token that
is "out of date". At that point, the client has to fall back to
synchronizing the entire collection by re-running the report request
using an empty token value.
Typically, a client will use the synchronization report to retrieve
the list of changes and will follow that with requests to retrieve
the content of changed resources. It is possible that additional
changes to the collection could occur between the time of the
synchronization report and resource content retrieval, which could
result in an inconsistent view of the collection. When clients use
this method of synchronization, they need to be aware that such
additional changes could occur and track them, e.g., by differences
between the ETag values returned in the synchronization report and
those returned when actually fetching resource content, by using
conditional requests as described in Section 5, or by repeating the
synchronization process until no changes are returned.
3.2. DAV:sync-collection Report
If the DAV:sync-collection report is implemented by a WebDAV server,
then the server MUST list the report in the
"DAV:supported-report-set" property on any collection that supports
synchronization.
To implement the behavior for this report, a server needs to keep
track of changes to any member URLs and their mapped resources in a
collection (as defined in Section 3 of [RFC4918]). This includes
noting the addition of new member URLs, the changes to the mapped
resources of existing member URLs, and the removal of member URLs.
The server will track each change and provide a synchronization
"token" to the client that describes the state of the server at a
specific point in time. This "token" is returned as part of the
response to the "sync-collection" report. Clients include the last
token they got from the server in the next "sync-collection" report
that they execute, and the server provides the changes from the
previous state (represented by the token) to the current state
(represented by the new token returned).
The synchronization token itself MUST be treated as an "opaque"
string by the client, i.e., the actual string data has no specific
meaning or syntax. However, the token MUST be a valid URI to allow
Daboo & Quillaud Standards Track [Page 6]
RFC 6578 WebDAV Sync March 2012
its use in an If precondition request header (see Section 5). For
example, a simple implementation of such a token could be a numeric
counter that counts each change as it occurs and relates that change
to the specific object that changed. The numeric value could be
appended to a "base" URI to form the valid sync-token.
Marshalling:
The request-URI MUST identify a collection. The request body MUST
be a DAV:sync-collection XML element (see Section 6.1), which MUST
contain one DAV:sync-token XML element, one DAV:sync-level
element, and one DAV:prop XML element, and MAY contain a DAV:limit
XML element.
This report is only defined when the Depth header has value "0";
other values result in a 400 (Bad Request) error response. Note
that [RFC3253], Section 3.6, states that if the Depth header is
not present, it defaults to a value of "0".
The response body for a successful request MUST be a
DAV:multistatus XML element, which MUST contain one DAV:sync-token
element in addition to one DAV:response element for each member
URL that was added, has had its mapped resource changed, or was
deleted since the last synchronization operation as specified by
the DAV:sync-token provided in the request. A given member URL
MUST appear only once in the response. In the case where multiple
member URLs of the request-URI are mapped to the same resource, if
the resource is changed, each member URL MUST be returned in the
response.
The content of each DAV:response element differs depending on how
the member was altered:
For members that have changed (i.e., are new or have had their
mapped resource modified), the DAV:response MUST contain at
least one DAV:propstat element and MUST NOT contain any
DAV:status element.
For members that have been removed, the DAV:response MUST
contain one DAV:status with a value set to '404 Not Found' and
MUST NOT contain any DAV:propstat element.
For members that are collections and are unable to support the
DAV:sync-collection report, the DAV:response MUST contain one
DAV:status with a value set to '403 Forbidden', a DAV:error
containing DAV:supported-report or DAV:sync-traversal-supported
(see Section 3.3 for which is appropriate) and MUST NOT contain
any DAV:propstat element.
Daboo & Quillaud Standards Track [Page 7]
RFC 6578 WebDAV Sync March 2012
The conditions under which each type of change can occur are
further described in Section 3.5.
Preconditions:
(DAV:valid-sync-token): The DAV:sync-token element value MUST be a
valid token previously returned by the server for the collection
targeted by the request-URI. Servers might need to invalidate
tokens previously returned to clients. Doing so will cause the
clients to fall back to doing full synchronization using the
report, though that will not require clients to download resources
that are already cached and have not changed. Even so, servers
MUST limit themselves to invalidating tokens only when absolutely
necessary. Specific reasons include:
* Servers might be unable to maintain all of the change data for
a collection due to storage or performance reasons, e.g.,
servers might only be able to maintain up to 3 weeks worth of
changes to a collection, or only up to 10,000 total changes, or
not wish to maintain changes for a deleted collection.
* Change to server implementation: servers might be upgraded to a
new implementation that tracks the history in a different
manner, and thus previous synchronization history is no longer
valid.
Postconditions:
(DAV:number-of-matches-within-limits): The number of changes
reported in the response must fall within the client-specified
limit. This condition might be triggered if a client requests a
limit on the number of responses (as per Section 3.7), but the
server is unable to truncate the result set at or below that
limit.
3.3. Depth Behavior
Servers MUST support only Depth:0 behavior with the
DAV:sync-collection report, i.e., the report targets only the
collection being synchronized in a single request. However, clients
do need to "scope" the synchronization to different levels within
that collection -- specifically, immediate children (level "1") and
all children at any depth (level "infinite"). To specify which level
to use, clients MUST include a DAV:sync-level XML element in the
request.
Daboo & Quillaud Standards Track [Page 8]
RFC 6578 WebDAV Sync March 2012
o When the client specifies the DAV:sync-level XML element with a
value of "1", only appropriate internal member URLs (immediate
children) of the collection specified as the request-URI are
reported.
o When the client specifies the DAV:sync-level XML element with a
value of "infinite", all appropriate member URLs of the collection
specified as the request-URI are reported, provided child
collections themselves also support the DAV:sync-collection
report.
o DAV:sync-token values returned by the server are not specific to
the value of the DAV:sync-level XML element used in the request.
As such, clients MAY use a DAV:sync-token value from a request
with one DAV:sync-level XML element value for a similar request
with a different DAV:sync-level XML element value; however, the
utility of this is limited.
Note that when a server supports a DAV:sync-level XML element with a
value of "infinite", it might not be possible to synchronize some
child collections within the collection targeted by the report. When
this occurs, the server MUST include a DAV:response element for the
child collection with status 403 (Forbidden). The 403 response MUST
be sent once, when the collection is first reported to the client.
In addition, the server MUST include a DAV:error element in the
DAV:response element, indicating one of two possible causes for this:
The DAV:sync-collection report is not supported at all on the
child collection. The DAV:error element MUST contain the
DAV:supported-report element.
The server is unwilling to report results for the child collection
when a DAV:sync-collection report with the DAV:sync-level XML
element set to "infinite" is executed on a parent resource. This
might happen when, for example, the synchronization state of the
collection resource is controlled by another subsystem. In such
cases clients can perform the DAV:sync-collection report directly
on the child collection instead. The DAV:error element MUST
contain the DAV:sync-traversal-supported element.
3.4. Types of Changes Reported on Initial Synchronization
When the DAV:sync-collection request contains an empty DAV:sync-token
element, the server MUST return all member URLs of the collection
(taking account of the DAV:sync-level XML element value as per
Section 3.3, and optional truncation of the result set as per
Section 3.6) and it MUST NOT return any removed member URLs. All
types of member (collection or non-collection) MUST be reported.
Daboo & Quillaud Standards Track [Page 9]
RFC 6578 WebDAV Sync March 2012
3.5. Types of Changes Reported on Subsequent Synchronizations
When the DAV:sync-collection request contains a valid value for the
DAV:sync-token element, two types of member URL state changes can be
returned (changed or removed). This section defines what triggers
each of these to be returned. It also clarifies the case where a
member URL might have undergone multiple changes between two
synchronization report requests. In all cases, the DAV:sync-level
XML element value (as per Section 3.3) and optional truncation of the
result set (as per Section 3.6) are taken into account by the server.
3.5.1. Changed Member
A member URL MUST be reported as changed if it has been newly mapped
as a member of the target collection since the request sync-token was
generated (e.g., when a new resource has been created as a child of
the collection). For example, this includes member URLs that have
been newly mapped as the result of a COPY, MOVE, BIND [RFC5842], or
REBIND [RFC5842] request. All types of member URL (collection or
non-collection) MUST be reported.
In the case where a mapping between a member URL and the target
collection was removed, then a new mapping with the same URI was
created, the member URL MUST be reported as changed and MUST NOT be
reported as removed.
A member URL MUST be reported as changed if its mapped resource's
entity tag value (defined in Section 3.11 of [RFC2616]) has changed
since the request sync-token was generated.
A member URL MAY be reported as changed if the user issuing the
request was granted access to this member URL, due to access control
changes.
Collection member URLs MUST be returned as changed if they are mapped
to an underlying resource (i.e., entity body) and if the entity tag
associated with that resource changes. There is no guarantee that
changes to members of a collection will result in a change in any
entity tag of that collection, so clients cannot rely on a series of
reports using the DAV:sync-level XML element value set to "1" at
multiple levels to track all changes within a collection. Instead, a
DAV:sync-level XML element with a value of "infinite" has to be used.
3.5.2. Removed Member
A member MUST be reported as removed if its mapping under the target
collection has been removed since the request sync-token was
generated, and it has not been remapped since it was removed. For
Daboo & Quillaud Standards Track [Page 10]
RFC 6578 WebDAV Sync March 2012
example, this includes members that have been unmapped as the result
of a MOVE, UNBIND [RFC5842], or REBIND [RFC5842] operation. This
also includes collection members that have been removed, including
ones that themselves do not support the DAV:sync-collection report.
If a member was added (and its mapped resource possibly modified),
then removed between two synchronization report requests, it MUST be
reported as removed. This ensures that a client that adds a member
is informed of the removal of the member, if the removal occurs
before the client has had a chance to execute a synchronization
report.
A member MAY be reported as removed if the user issuing the request
no longer has access to this member, due to access control changes.
For a report with the DAV:sync-level XML element value set to
"infinite", where a collection is removed, the server MUST NOT report
the removal of any members of the removed collection. Clients MUST
assume that if a collection is reported as being removed, then all
members of that collection have also been removed.
3.6. Truncation of Results
A server MAY limit the number of member URLs in a response, for
example, to limit the amount of work expended in processing a
request, or as the result of an explicit limit set by the client. If
the result set is truncated, the response MUST use status code 207
(Multi-Status), return a DAV:multistatus response body, and indicate
a status of 507 (Insufficient Storage) for the request-URI. That
DAV:response element SHOULD include a DAV:error element with the
DAV:number-of-matches-within-limits precondition, as defined in
[RFC3744] (Section 9.2). DAV:response elements for all the changes
being reported are also included.
When truncation occurs, the DAV:sync-token value returned in the
response MUST represent the correct state for the partial set of
changes returned. That allows the client to use the returned
DAV:sync-token to fetch the next set of changes. In this way, the
client can effectively "page" through the entire set of changes in a
consistent manner.
Clients MUST handle the 507 status on the request-URI in the response
to the report.
For example, consider a server that records changes using a strictly
increasing integer to represent a "revision number" and uses that
quantity as the DAV:sync-token value (appropriately encoded as a
URI). Assume the last DAV:sync-token used by the client was
Daboo & Quillaud Standards Track [Page 11]
RFC 6578 WebDAV Sync March 2012
"http://example.com/sync/10", and since then 15 additional changes to
different resources have occurred. If the client executes a
DAV:sync-collection request with a DAV:sync-token of
"http://example.com/sync/10", without a limit, the server would
return 15 DAV:response elements and a DAV:sync-token with value
"http://example.com/sync/25". But if the server chooses to limit
responses to at most 10 changes, then it would return only 10
DAV:response elements and a DAV:sync-token with value
"http://example.com/sync/20", together with an additional
DAV:response element for the request-URI with a status code of 507.
Subsequently, the client can reissue the request with the
DAV:sync-token value returned from the server and fetch the remaining
5 changes.
3.7. Limiting Results
A client can limit the number of results returned by the server
through use of the DAV:limit element ([RFC5323], Section 5.17) in the
request body. This is useful when clients have limited space or
bandwidth for the results. If a server is unable to truncate the
result at or below the requested number, then it MUST fail the
request with a DAV:number-of-matches-within-limits postcondition
error. When the results can be correctly limited by the server, the
server MUST follow the rules above for indicating a result set
truncation to the client.
3.8. Example: Initial DAV:sync-collection Report
In this example, the client is making its first synchronization
request to the server, so the DAV:sync-token element in the request
is empty. It also asks for the DAV:getetag property and for a
proprietary property. The server responds with the items currently
in the targeted collection. The current synchronization token is
also returned.
>> Request <<
REPORT /home/cyrusdaboo/ HTTP/1.1
Host: webdav.example.com
Depth: 0
Content-Type: text/xml; charset="utf-8"
Content-Length: xxxx
<?xml version="1.0" encoding="utf-8" ?>
<D:sync-collection xmlns:D="DAV:">
<D:sync-token/>
<D:sync-level>1</D:sync-level>
Daboo & Quillaud Standards Track [Page 12]
RFC 6578 WebDAV Sync March 2012
<D:prop xmlns:R="urn:ns.example.com:boxschema">
<D:getetag/>
<R:bigbox/>
</D:prop>
</D:sync-collection>
>> Response <<
HTTP/1.1 207 Multi-Status
Content-Type: text/xml; charset="utf-8"
Content-Length: xxxx
<?xml version="1.0" encoding="utf-8" ?>
<D:multistatus xmlns:D="DAV:">
<D:response>
<D:href
>http://webdav.example.com/home/cyrusdaboo/test.doc</D:href>
<D:propstat>
<D:prop>
<D:getetag>"00001-abcd1"</D:getetag>
<R:bigbox xmlns:R="urn:ns.example.com:boxschema">
<R:BoxType>Box type A</R:BoxType>
</R:bigbox>
</D:prop>
<D:status>HTTP/1.1 200 OK</D:status>
</D:propstat>
</D:response>
<D:response>
<D:href
>http://webdav.example.com/home/cyrusdaboo/vcard.vcf</D:href>
<D:propstat>
<D:prop>
<D:getetag>"00002-abcd1"</D:getetag>
</D:prop>
<D:status>HTTP/1.1 200 OK</D:status>
</D:propstat>
<D:propstat>
<D:prop>
<R:bigbox xmlns:R="urn:ns.example.com:boxschema"/>
</D:prop>
<D:status>HTTP/1.1 404 Not Found</D:status>
</D:propstat>
</D:response>
<D:response>
<D:href
>http://webdav.example.com/home/cyrusdaboo/calendar.ics</D:href>
Daboo & Quillaud Standards Track [Page 13]
RFC 6578 WebDAV Sync March 2012
<D:propstat>
<D:prop>
<D:getetag>"00003-abcd1"</D:getetag>
</D:prop>
<D:status>HTTP/1.1 200 OK</D:status>
</D:propstat>
<D:propstat>
<D:prop>
<R:bigbox xmlns:R="urn:ns.example.com:boxschema"/>
</D:prop>
<D:status>HTTP/1.1 404 Not Found</D:status>
</D:propstat>
</D:response>
<D:sync-token>http://example.com/ns/sync/1234</D:sync-token>
</D:multistatus>
3.9. Example: DAV:sync-collection Report with Token
In this example, the client is making a synchronization request to
the server and is using the DAV:sync-token element returned from the
last report it ran on this collection. The server responds, listing
the items that have been added, changed, or removed. The (new)
current synchronization token is also returned.
>> Request <<
REPORT /home/cyrusdaboo/ HTTP/1.1
Host: webdav.example.com
Content-Type: text/xml; charset="utf-8"
Content-Length: xxxx
<?xml version="1.0" encoding="utf-8" ?>
<D:sync-collection xmlns:D="DAV:">
<D:sync-token>http://example.com/ns/sync/1234</D:sync-token>
<D:sync-level>1</D:sync-level>
<D:prop xmlns:R="urn:ns.example.com:boxschema">
<D:getetag/>
<R:bigbox/>
</D:prop>
</D:sync-collection>
Daboo & Quillaud Standards Track [Page 14]
RFC 6578 WebDAV Sync March 2012
>> Response <<
HTTP/1.1 207 Multi-Status
Content-Type: text/xml; charset="utf-8"
Content-Length: xxxx
<?xml version="1.0" encoding="utf-8" ?>
<D:multistatus xmlns:D="DAV:">
<D:response>
<D:href
>http://webdav.example.com/home/cyrusdaboo/file.xml</D:href>
<D:propstat>
<D:prop>
<D:getetag>"00004-abcd1"</D:getetag>
</D:prop>
<D:status>HTTP/1.1 200 OK</D:status>
</D:propstat>
<D:propstat>
<D:prop>
<R:bigbox xmlns:R="urn:ns.example.com:boxschema"/>
</D:prop>
<D:status>HTTP/1.1 404 Not Found</D:status>
</D:propstat>
</D:response>
<D:response>
<D:href
>http://webdav.example.com/home/cyrusdaboo/vcard.vcf</D:href>
<D:propstat>
<D:prop>
<D:getetag>"00002-abcd2"</D:getetag>
</D:prop>
<D:status>HTTP/1.1 200 OK</D:status>
</D:propstat>
<D:propstat>
<D:prop>
<R:bigbox xmlns:R="urn:ns.example.com:boxschema"/>
</D:prop>
<D:status>HTTP/1.1 404 Not Found</D:status>
</D:propstat>
</D:response>
<D:response>
<D:href
>http://webdav.example.com/home/cyrusdaboo/test.doc</D:href>
<D:status>HTTP/1.1 404 Not Found</D:status>
</D:response>
<D:sync-token>http://example.com/ns/sync/1238</D:sync-token>
</D:multistatus>
Daboo & Quillaud Standards Track [Page 15]
RFC 6578 WebDAV Sync March 2012
3.10. Example: Initial DAV:sync-collection Report with Truncation
In this example, the client is making its first synchronization
request to the server, so the DAV:sync-token element in the request
is empty. It also asks for the DAV:getetag property. The server
responds with the items currently in the targeted collection but
truncated at two items. The synchronization token for the truncated
result set is returned.
>> Request <<
REPORT /home/cyrusdaboo/ HTTP/1.1
Host: webdav.example.com
Depth: 0
Content-Type: text/xml; charset="utf-8"
Content-Length: xxxx
<?xml version="1.0" encoding="utf-8" ?>
<D:sync-collection xmlns:D="DAV:">
<D:sync-token/>
<D:sync-level>1</D:sync-level>
<D:prop>
<D:getetag/>
</D:prop>
</D:sync-collection>
>> Response <<
HTTP/1.1 207 Multi-Status
Content-Type: text/xml; charset="utf-8"
Content-Length: xxxx
<?xml version="1.0" encoding="utf-8" ?>
<D:multistatus xmlns:D="DAV:">
<D:response>
<D:href
>http://webdav.example.com/home/cyrusdaboo/test.doc</D:href>
<D:propstat>
<D:prop>
<D:getetag>"00001-abcd1"</D:getetag>
</D:prop>
<D:status>HTTP/1.1 200 OK</D:status>
</D:propstat>
</D:response>
<D:response>
Daboo & Quillaud Standards Track [Page 16]
RFC 6578 WebDAV Sync March 2012
<D:href
>http://webdav.example.com/home/cyrusdaboo/vcard.vcf</D:href>
<D:propstat>
<D:prop>
<D:getetag>"00002-abcd1"</D:getetag>
</D:prop>
<D:status>HTTP/1.1 200 OK</D:status>
</D:propstat>
</D:response>
<D:response>
<D:href
>http://webdav.example.com/home/cyrusdaboo/</D:href>
<D:status>HTTP/1.1 507 Insufficient Storage</D:status>
<D:error><D:number-of-matches-within-limits/></D:error>
</D:response>
<D:sync-token>http://example.com/ns/sync/1233</D:sync-token>
</D:multistatus>
3.11. Example: Initial DAV:sync-collection Report with Limit
In this example, the client is making its first synchronization
request to the server, so the DAV:sync-token element in the request
is empty. It requests a limit of 1 for the responses returned by the
server. It also asks for the DAV:getetag property. The server
responds with the items currently in the targeted collection, but
truncated at one item. The synchronization token for the truncated
result set is returned.
>> Request <<
REPORT /home/cyrusdaboo/ HTTP/1.1
Host: webdav.example.com
Depth: 0
Content-Type: text/xml; charset="utf-8"
Content-Length: xxxx
<?xml version="1.0" encoding="utf-8" ?>
<D:sync-collection xmlns:D="DAV:">
<D:sync-token/>
<D:sync-level>1</D:sync-level>
<D:limit>
<D:nresults>1</D:nresults>
</D:limit>
<D:prop>
<D:getetag/>
</D:prop>
</D:sync-collection>
Daboo & Quillaud Standards Track [Page 17]
RFC 6578 WebDAV Sync March 2012
>> Response <<
HTTP/1.1 207 Multi-Status
Content-Type: text/xml; charset="utf-8"
Content-Length: xxxx
<?xml version="1.0" encoding="utf-8" ?>
<D:multistatus xmlns:D="DAV:">
<D:response>
<D:href
>http://webdav.example.com/home/cyrusdaboo/test.doc</D:href>
<D:propstat>
<D:prop>
<D:getetag>"00001-abcd1"</D:getetag>
</D:prop>
<D:status>HTTP/1.1 200 OK</D:status>
</D:propstat>
</D:response>
<D:response>
<D:href
>http://webdav.example.com/home/cyrusdaboo/</D:href>
<D:status>HTTP/1.1 507 Insufficient Storage</D:status>
<D:error><D:number-of-matches-within-limits/></D:error>
</D:response>
<D:sync-token>http://example.com/ns/sync/1232</D:sync-token>
</D:multistatus>
3.12. Example: DAV:sync-collection Report with Unsupported Limit
In this example, the client is making a synchronization request to
the server with a valid DAV:sync-token element value. It requests a
limit of 100 for the responses returned by the server. It also asks
for the DAV:getetag property. The server is unable to limit the
results to the maximum specified by the client, so it responds with a
507 status code and appropriate postcondition error code.
>> Request <<
REPORT /home/cyrusdaboo/ HTTP/1.1
Host: webdav.example.com
Depth: 0
Content-Type: text/xml; charset="utf-8"
Content-Length: xxxx
Daboo & Quillaud Standards Track [Page 18]
RFC 6578 WebDAV Sync March 2012
<?xml version="1.0" encoding="utf-8" ?>
<D:sync-collection xmlns:D="DAV:">
<D:sync-token>http://example.com/ns/sync/1232</D:sync-token>
<D:sync-level>1</D:sync-level>
<D:limit>
<D:nresults>100</D:nresults>
</D:limit>
<D:prop>
<D:getetag/>
</D:prop>
</D:sync-collection>
>> Response <<
HTTP/1.1 507 Insufficient Storage
Content-Type: text/xml; charset="utf-8"
Content-Length: xxxx
<?xml version="1.0" encoding="utf-8" ?>
<D:error xmlns:D="DAV:">
<D:number-of-matches-within-limits/>
</D:error>
3.13. Example: DAV:sync-level Set to Infinite, Initial
DAV:sync-collection Report
In this example, the client is making its first synchronization
request to the server, so the DAV:sync-token element in the request
is empty, and it is using DAV:sync-level set to "infinite". It also
asks for the DAV:getetag property and for a proprietary property.
The server responds with the items currently in the targeted
collection. The current synchronization token is also returned.
The collection /home/cyrusdaboo/collection1/ exists and has one child
resource that is also reported. The collection /home/cyrusdaboo/
collection2/ exists but has no child resources. The collection
/home/cyrusdaboo/shared/ is returned with a 403 status indicating
that a collection exists, but it is unable to report on changes
within it in the scope of the current DAV:sync-level "infinite"
report. Instead, the client can try a DAV:sync-collection report
directly on the collection URI.
Daboo & Quillaud Standards Track [Page 19]
RFC 6578 WebDAV Sync March 2012
>> Request <<
REPORT /home/cyrusdaboo/ HTTP/1.1
Host: webdav.example.com
Depth: 0
Content-Type: text/xml; charset="utf-8"
Content-Length: xxxx
<?xml version="1.0" encoding="utf-8" ?>
<D:sync-collection xmlns:D="DAV:">
<D:sync-token/>
<D:sync-level>infinite</D:sync-level>
<D:prop xmlns:R="urn:ns.example.com:boxschema">
<D:getetag/>
<R:bigbox/>
</D:prop>
</D:sync-collection>
>> Response <<
HTTP/1.1 207 Multi-Status
Content-Type: text/xml; charset="utf-8"
Content-Length: xxxx
<?xml version="1.0" encoding="utf-8" ?>
<D:multistatus xmlns:D="DAV:">
<D:response>
<D:href>/home/cyrusdaboo/collection1/</D:href>
<D:propstat>
<D:prop>
<D:getetag>"00001-abcd1"</D:getetag>
<R:bigbox xmlns:R="urn:ns.example.com:boxschema">
<R:BoxType>Box type A</R:BoxType>
</R:bigbox>
</D:prop>
<D:status>HTTP/1.1 200 OK</D:status>
</D:propstat>
</D:response>
<D:response>
<D:href>/home/cyrusdaboo/collection1/test.doc</D:href>
<D:propstat>
<D:prop>
<D:getetag>"00001-abcd1"</D:getetag>
<R:bigbox xmlns:R="urn:ns.example.com:boxschema">
<R:BoxType>Box type A</R:BoxType>
Daboo & Quillaud Standards Track [Page 20]
RFC 6578 WebDAV Sync March 2012
</R:bigbox>
</D:prop>
<D:status>HTTP/1.1 200 OK</D:status>
</D:propstat>
</D:response>
<D:response>
<D:href>/home/cyrusdaboo/collection2/</D:href>
<D:propstat>
<D:prop>
<D:getetag/>
</D:prop>
<D:status>HTTP/1.1 404 Not Found</D:status>
</D:propstat>
<D:propstat>
<D:prop>
<R:bigbox xmlns:R="urn:ns.example.com:boxschema"/>
</D:prop>
<D:status>HTTP/1.1 404 Not Found</D:status>
</D:propstat>
</D:response>
<D:response>
<D:href>/home/cyrusdaboo/calendar.ics</D:href>
<D:propstat>
<D:prop>
<D:getetag>"00003-abcd1"</D:getetag>
</D:prop>
<D:status>HTTP/1.1 200 OK</D:status>
</D:propstat>
<D:propstat>
<D:prop>
<R:bigbox xmlns:R="urn:ns.example.com:boxschema"/>
</D:prop>
<D:status>HTTP/1.1 404 Not Found</D:status>
</D:propstat>
</D:response>
<D:response>
<D:href>/home/cyrusdaboo/shared/</D:href>
<D:status>HTTP/1.1 403 Forbidden</D:status>
<D:error><D:sync-traversal-supported/></D:error>
</D:response>
<D:sync-token>http://example.com/ns/sync/1234</D:sync-token>
</D:multistatus>
Daboo & Quillaud Standards Track [Page 21]
RFC 6578 WebDAV Sync March 2012
4. DAV:sync-token Property
Name: sync-token
Namespace: DAV:
Purpose: Contains the value of the synchronization token as it would
be returned by a DAV:sync-collection report.
Value: Any valid URI.
Protected: MUST be protected because this value is created and
controlled by the server.
COPY/MOVE behavior: This property value is dependent on the final
state of the destination resource, not the value of the property
on the source resource.
Description: The DAV:sync-token property MUST be defined on all
resources that support the DAV:sync-collection report. It
contains the value of the synchronization token as it would be
returned by a DAV:sync-collection report on that resource at the
same point in time. It SHOULD NOT be returned by a PROPFIND
DAV:allprop request (as defined in Section 14.2 of [RFC4918]).
Definition:
<!ELEMENT sync-token #PCDATA>
<!-- Text MUST be a valid URI -->
5. DAV:sync-token Use with If Header
WebDAV provides an If precondition header that allows for "state
tokens" to be used as preconditions on HTTP requests (as defined in
Section 10.4 of [RFC4918]). This specification allows the
DAV:sync-token value to be used as one such token in an If header.
By using this, clients can ensure requests only complete when there
have been no changes to the content of a collection, by virtue of an
unchanged DAV:sync-token value. Servers MUST support use of
DAV:sync-token values in If request headers.
5.1. Example: If Precondition with PUT
In this example, the client has already used the DAV:sync-collection
report to synchronize the collection /home/cyrusdaboo/collection/.
Now it wants to add a new resource to the collection, but only if
there have been no other changes since the last synchronization.
Daboo & Quillaud Standards Track [Page 22]
RFC 6578 WebDAV Sync March 2012
Note that because the DAV:sync-token is defined on the collection and
not on the resource targeted by the request, the If header value
needs to use the "Resource_Tag" construct for the header syntax to
correctly identify that the supplied state token refers to the
collection resource.
>> Request <<
PUT /home/cyrusdaboo/collection/newresource.txt HTTP/1.1
Host: webdav.example.com
If: </home/cyrusdaboo/collection/>
(<http://example.com/ns/sync/12345>)
Content-Type: text/plain; charset="utf-8"
Content-Length: xxxx
Some content here...
>> Response <<
HTTP/1.1 201 Created
5.2. Example: If Precondition with MKCOL
In this example, the client has already used the DAV:sync-collection
report to synchronize the collection /home/cyrusdaboo/collection/.
Now, it wants to add a new collection to the collection, but only if
there have been no other changes since the last synchronization.
Note that because the DAV:sync-token is defined on the collection and
not on the resource targeted by the request, the If header value
needs to use the "Resource_Tag" construct for the header syntax to
correctly identify that the supplied state token refers to the
collection resource. In this case, the request fails as another
change has occurred to the collection corresponding to the supplied
DAV:sync-token.
>> Request <<
MKCOL /home/cyrusdaboo/collection/child/ HTTP/1.1
Host: webdav.example.com
If: </home/cyrusdaboo/collection/>
(<http://example.com/ns/sync/12346>)
Daboo & Quillaud Standards Track [Page 23]
RFC 6578 WebDAV Sync March 2012
>> Response <<
HTTP/1.1 412 Precondition Failed
6. XML Element Definitions
6.1. DAV:sync-collection XML Element
Name: sync-collection
Namespace: DAV:
Purpose: WebDAV report used to synchronize data between client and
server.
Description: See Section 3.
<!ELEMENT sync-collection (sync-token, sync-level, limit?, prop)>
<!-- DAV:limit defined in RFC 5323, Section 5.17 -->
<!-- DAV:prop defined in RFC 4918, Section 14.18 -->
6.2. DAV:sync-token XML Element
Name: sync-token
Namespace: DAV:
Purpose: The synchronization token provided by the server and
returned by the client.
Description: See Section 3.
<!ELEMENT sync-token CDATA>
<!-- Text MUST be a URI -->
6.3. DAV:sync-level XML Element
Name: sync-level
Namespace: DAV:
Purpose: Indicates the "scope" of the synchronization report
request.
Description: See Section 3.3.
Daboo & Quillaud Standards Track [Page 24]
RFC 6578 WebDAV Sync March 2012
<!ELEMENT sync-level CDATA>
<!-- Text MUST be either "1" or "infinite" -->
6.4. DAV:multistatus XML Element
Name: multistatus
Namespace: DAV:
Purpose: Extends the DAV:multistatus element to include
synchronization details.
Description: See Section 3.
<!ELEMENT multistatus (response*, responsedescription?,
sync-token?) >
<!-- DAV:multistatus originally defined in RFC 4918, Section 14.16
but overridden here to add the DAV:sync-token element -->
<!-- DAV:response defined in RFC 4918, Section 14.24 -->
<!-- DAV:responsedescription defined in RFC 4918, Section 14.25 -->
7. Security Considerations
This extension does not introduce any new security concerns beyond
those already described in HTTP and WebDAV.
8. Acknowledgments
The following individuals contributed their ideas and support for
writing this specification: Bernard Desruisseaux, Werner Donne, Mike
Douglass, Ciny Joy, Andrew McMillan, Julian Reschke, and Wilfredo
Sanchez. We would like to thank the Calendaring and Scheduling
Consortium for facilitating interoperability testing for early
implementations of this specification.
9. References
9.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2616] Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext
Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.
Daboo & Quillaud Standards Track [Page 25]
RFC 6578 WebDAV Sync March 2012
[RFC3253] Clemm, G., Amsden, J., Ellison, T., Kaler, C., and J.
Whitehead, "Versioning Extensions to WebDAV
(Web Distributed Authoring and Versioning)", RFC 3253,
March 2002.
[RFC3744] Clemm, G., Reschke, J., Sedlar, E., and J. Whitehead, "Web
Distributed Authoring and Versioning (WebDAV)
Access Control Protocol", RFC 3744, May 2004.
[RFC4918] Dusseault, L., "HTTP Extensions for Web Distributed
Authoring and Versioning (WebDAV)", RFC 4918, June 2007.
[RFC5323] Reschke, J., Reddy, S., Davis, J., and A. Babich, "Web
Distributed Authoring and Versioning (WebDAV) SEARCH",
RFC 5323, November 2008.
[W3C.REC-xml-20081126]
Sperberg-McQueen, C., Yergeau, F., Paoli, J., Maler, E.,
and T. Bray, "Extensible Markup Language (XML) 1.0 (Fifth
Edition)", World Wide Web Consortium
Recommendation REC-xml-20081126, November 2008,
<http://www.w3.org/TR/2008/REC-xml-20081126>.
9.2. Informative References
[RFC4791] Daboo, C., Desruisseaux, B., and L. Dusseault,
"Calendaring Extensions to WebDAV (CalDAV)", RFC 4791,
March 2007.
[RFC5842] Clemm, G., Crawford, J., Reschke, J., and J. Whitehead,
"Binding Extensions to Web Distributed Authoring and
Versioning (WebDAV)", RFC 5842, April 2010.
[RFC6352] Daboo, C., "CardDAV: vCard Extensions to Web Distributed
Authoring and Versioning (WebDAV)", RFC 6352, August 2011.
Daboo & Quillaud Standards Track [Page 26]
RFC 6578 WebDAV Sync March 2012
Appendix A. Backwards-Compatible Handling of Depth
In prior draft versions of this specification, the Depth request
header was used instead of the DAV:sync-level element to indicate the
"scope" of the synchronization request. Servers that wish to be
backwards compatible with clients conforming to the older
specification should do the following: if a DAV:sync-level element is
not present in the request body, use the Depth header value as the
equivalent value for the missing DAV:sync-level element.
Appendix B. Example of a Client Synchronization Approach
This appendix gives an example of how a client might accomplish
collection synchronization using the WebDAV sync report defined in
this specification. Note that this is provided purely as an example,
and is not meant to be treated as a normative "algorithm" for client
synchronization.
This example assumes a WebDAV client interacting with a WebDAV server
supporting the sync report. The client keeps a local cache of
resources in a targeted collection, "/collection/". Local changes
are assumed to not occur. The client is only tracking changes to the
immediate children of the collection resource.
** Initial State **
The client starts out with an empty local cache.
The client starts out with no DAV:sync-token stored for
"/collection/".
** Initial Synchronization **
The client issues a sync report request to the server with an
empty DAV:sync-token element, and DAV:sync-level set to "1". The
request asks for the server to return the DAV:getetag WebDAV
property for each resource it reports.
Daboo & Quillaud Standards Track [Page 27]
RFC 6578 WebDAV Sync March 2012
The server returns a response containing the list of current
resources (with their associated DAV:getetag properties) as well
as a new DAV:sync-token value.
The client associates the new DAV:sync-token value with the
collection.
For each reported resource, the client creates a set of (resource
path, DAV:getetag) tuples.
For each tuple, the client issues an HTTP GET request to the
server to retrieve its content, and updates the (resource path,
DAV:getetag) entry in its local cache for that resource with the
ETag response header value returned in the GET request.
** Routine Synchronization **
The client issues a sync report request to the server with the
DAV:sync-token set to the current cached value from the last sync,
and DAV:sync-level set to "1". The request asks for the server to
return the DAV:getetag WebDAV property for each resource it
reports.
The server returns a response containing the list of changes as
well as a new DAV:sync-token value.
The client associates the new DAV:sync-token value with the
collection.
* Process Removed Resources *
For each resource reported with a 404 response status, the client
removes the corresponding resource from its local cache.
* Process Resources *
For each remaining reported resource, the client creates a new set
of (resource path, DAV:getetag) tuples.
The client then determines which resources are in the new set but
not in the current cache, and which resources are in the new set
and the current cache but have a different DAV:getetag value. For
each of those, the client issues an HTTP GET request to the server
to retrieve the resource content, and updates the (resource path,
DAV:getetag) entry in its local cache for that resource with the
ETag response header value returned in the GET request.
Daboo & Quillaud Standards Track [Page 28]
RFC 6578 WebDAV Sync March 2012
Authors' Addresses
Cyrus Daboo
Apple Inc.
1 Infinite Loop
Cupertino, CA 95014
USA
EMail: cyrus@daboo.name
URI: http://www.apple.com/
Arnaud Quillaud
Oracle Corporation
180, Avenue de l'Europe
Saint Ismier cedex 38334
France
EMail: arnaud.quillaud@oracle.com
URI: http://www.oracle.com/
Daboo & Quillaud Standards Track [Page 29]