Internet Engineering Task Force (IETF) G. Lozano
Request for Comments: 7848 ICANN
Category: Standards Track June 2016
ISSN: 2070-1721
Mark and Signed Mark Objects Mapping
Abstract
Domain Name Registries (DNRs) may operate in special modes for
certain periods of time, enabling trademark holders to protect their
rights during the introduction of a Top-Level Domain (TLD).
One of those special modes of operation is the Sunrise Period. The
Sunrise Period allows trademark holders an advance opportunity to
register domain names corresponding to their trademarks before names
are generally available to the public.
This document describes the format of a mark and a digitally signed
mark used by trademark holders for registering domain names during
the Sunrise Period of generic Top-Level Domains (gTLDs). Three types
of Mark objects are defined in this specification: registered
trademarks, court-validated marks, and marks protected by statue or
treaty.
Status of This Memo
This is an Internet Standards Track document.
This document is a product of the Internet Engineering Task Force
(IETF). It represents the consensus of the IETF community. It has
received public review and has been approved for publication by the
Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 7841.
Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc7848.
Lozano Standards Track [Page 1]
RFC 7848 Mark and Signed Mark June 2016
Copyright Notice
Copyright (c) 2016 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1. Terminology . . . . . . . . . . . . . . . . . . . . . . . 4
2. Object Description . . . . . . . . . . . . . . . . . . . . . 4
2.1. Holder and Contact Objects . . . . . . . . . . . . . . . 5
2.2. Mark . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.3. Signed Mark . . . . . . . . . . . . . . . . . . . . . . . 10
2.4. Encoded Signed Mark . . . . . . . . . . . . . . . . . . . 13
3. Formal Syntax . . . . . . . . . . . . . . . . . . . . . . . . 14
3.1. Signed Mark Schema . . . . . . . . . . . . . . . . . . . 14
3.2. Mark Schema . . . . . . . . . . . . . . . . . . . . . . . 15
4. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 21
5. Security Considerations . . . . . . . . . . . . . . . . . . . 22
6. References . . . . . . . . . . . . . . . . . . . . . . . . . 22
6.1. Normative References . . . . . . . . . . . . . . . . . . 22
6.2. Informative References . . . . . . . . . . . . . . . . . 24
Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . . 24
Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 24
Lozano Standards Track [Page 2]
RFC 7848 Mark and Signed Mark June 2016
1. Introduction
Domain Name Registries (DNRs) may operate in special modes for
certain periods of time enabling trademark holders to protect their
rights during the introduction of a Top-Level Domain (TLD).
One of those special modes of operation is the Sunrise Period. The
Sunrise Period allows trademark holders an advance opportunity to
register domain names corresponding to their trademarks before names
are generally available to the public.
This specification was defined as part of the development of the
ICANN Trademark Clearinghouse (TMCH). The ICANN TMCH is a global
repository for trademark data used by DNRs, registrars, and trademark
holders during the registration process of domain names.
This document describes a mapping of the common elements found in
trademark data. A digitally signed mark format is defined in order
to support digital signatures on the mark. Finally, a mapping for
encoding the signed mark document is defined.
Three types of Mark objects are defined in this specification:
registered trademarks, court-validated marks, and marks protected by
statue or treaty.
This specification is intended to be used in the gTLD space, but
nothing precludes the use of this format by other entities.
The detailed policy regarding the public key infrastructure (PKI),
authorized validators, and other requirements must be defined based
on the local policy of the entities using this specification. In the
case of gTLDs, the detailed policy regarding the use of this
specification is defined in the Rights Protection Mechanism
Requirements document (see [ICANN-TMCH]), and the PKI is defined in
[TMCH]. Implementations will need to implement such a PKI (or an
equivalent) in order for the signatures defined in this document to
have any useful semantics.
The objects specified in this document can be referenced by
application protocols like the Extensible Provisioning Protocol
(EPP), defined in [RFC5730].
Lozano Standards Track [Page 3]
RFC 7848 Mark and Signed Mark June 2016
1.1. Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC 2119 [RFC2119].
XML (EXtensible Markup Language) is case sensitive. Unless stated
otherwise, XML specifications and examples provided in this document
MUST be interpreted in the character case presented in order to
develop a conforming implementation.
"signedMark-1.0" is used as an abbreviation for
"urn:ietf:params:xml:ns:signedMark-1.0". The XML namespace prefix
"smd" is used, but implementations MUST NOT depend on it and instead
employ a proper namespace-aware XML parser and serializer to
interpret and output the XML documents.
"mark-1.0" is used as an abbreviation for
"urn:ietf:params:xml:ns:mark-1.0". The XML namespace prefix "mark"
is used, but implementations MUST NOT depend on it and instead employ
a proper namespace-aware XML parser and serializer to interpret and
output the XML documents.
2. Object Description
This section defines the Mark and Signed Mark objects. Empty complex
element types and abstract elements are defined to support additional
definitions using XML schema substitution groups. Support for
replacement through the XML schema substitution groups is included in
the description of the objects.
This section defines some elements as OPTIONAL. If an element is not
defined as OPTIONAL, then it MUST be included in the object.
The following elements are defined as telephone numbers:
<mark:voice>, <mark:fax>, and <smd:voice>. The representation of
telephone numbers in this specification is derived from structures
defined in [ITU.E164.2005]. Telephone numbers described in this
mapping are character strings that MUST begin with a plus sign ("+",
ASCII value 0x002B), followed by a country code defined in
[ITU.E164.2005], followed by a dot (".", ASCII value 0x002E),
followed by a sequence of digits representing the telephone number.
An optional "x" attribute is provided to note telephone extension
information.
The following elements are defined as email addresses: <mark:email>
and <smd:email>. Email address syntax is defined in [RFC5322].
Lozano Standards Track [Page 4]
RFC 7848 Mark and Signed Mark June 2016
2.1. Holder and Contact Objects
Marks are linked to Holder objects and optionally linked to Contact
objects. This section defines the <mark:holder> and <mark:contact>
objects.
o The child elements of <mark:holder> include:
* A <mark:name> element that contains the name of the individual
holder of the mark. At least one of <mark:name> and <mark:org>
MUST be specified, and <mark:name> is OPTIONAL if <mark:org> is
specified.
* A <mark:org> element that contains the name of the organization
holder of the mark. At least one of <mark:name> and <mark:org>
MUST be specified, and <mark:org> is OPTIONAL if <mark:name> is
specified.
* A <mark:addr> element that contains the address information of
the holder of a mark. A <mark:addr> contains the following
child elements:
+ One, two, or three OPTIONAL <mark:street> elements that
contain the holder's street address.
+ A <mark:city> element that contains the holder's city.
+ An OPTIONAL <mark:sp> element that contains the holder's
state or province.
+ An OPTIONAL <mark:pc> element that contains the holder's
postal code.
+ A <mark:cc> element that contains the holder's country code.
This is a two-character code from [ISO3166-2].
* An OPTIONAL <mark:voice> element that contains the holder's
voice telephone number.
* An OPTIONAL <mark:fax> element that contains the holder's
facsimile telephone number.
* An OPTIONAL <mark:email> element that contains the email
address of the holder.
Lozano Standards Track [Page 5]
RFC 7848 Mark and Signed Mark June 2016
o The child elements of <mark:contact> include:
* A <mark:name> element that contains the name of the responsible
person.
* An OPTIONAL <mark:org> element that contains the name of the
organization of the contact.
* A <mark:addr> element that contains the address information of
the contact. A <mark:addr> contains the following child
elements:
+ One, two, or three OPTIONAL <mark:street> elements that
contain the contact's street address.
+ A <mark:city> element that contains the contact's city.
+ An OPTIONAL <mark:sp> element that contains the contact's
state or province.
+ An OPTIONAL <mark:pc> element that contains the contact's
postal code.
+ A <mark:cc> element that contains the contact's country
code. This is a two-character code from [ISO3166-2].
* A <mark:voice> element that contains the contact's voice
telephone number.
* An OPTIONAL <mark:fax> element that contains the contact's
facsimile telephone number.
* A <mark:email> element that contains the contact's email
address.
2.2. Mark
A <mark:mark> element that describes an applicant's prior right to a
given domain name.
A <mark:mark> element substitutes for the <mark:abstractMark>
abstract element to define a concrete definition of a mark. The
<mark:abstractMark> element can be replaced by other mark definitions
using the XML schema substitution groups feature.
Lozano Standards Track [Page 6]
RFC 7848 Mark and Signed Mark June 2016
The child elements of the <mark:mark> element include:
One or more <mark:trademark>, <mark:treatyOrStatute>, and
<mark:court> elements that contain the detailed information of marks.
o A <mark:trademark> element that contains the following child
elements:
* A <mark:id> that uniquely identifies a mark in relation to a
repository of marks potentially maintained by more than one
issuer. A <mark:id> value is a concatenation of the local
identifier, followed by a hyphen ("-", ASCII value 0x002D),
followed by the issuer identifier.
* A <mark:markName> element that contains the mark text string.
* One or more <mark:holder> elements that contain the information
of the holder of the mark. An "entitlement" attribute is used
to identify the entitlement of the holder; possible values are
"owner", "assignee", and "licensee".
* Zero or more OPTIONAL <mark:contact> elements that contain the
information of the representative of the mark registration. A
"type" attribute is used to identify the type of contact;
possible values are "owner", "agent", or "thirdparty".
* A <mark:jurisdiction> element that contains the two-character
code of the jurisdiction where the trademark was registered.
This is a two-character code from [WIPO.ST3].
* Zero or more OPTIONAL <mark:class> elements that contain the
World Intellectual Property Organization (WIPO) Nice
Classification class numbers of the mark as defined in the WIPO
Nice Classification [WIPO-NICE-CLASSES].
* Zero or more OPTIONAL <mark:label> elements that contain the
A-label form (as defined in [RFC5890]) of the label that
corresponds to the <mark:markName>.
* A <mark:goodsAndServices> element that contains the full
description of the goods and services from the document
certifying the registration of the mark.
* An OPTIONAL <mark:apId> element that contains the trademark
application ID registered in the trademark office.
* An OPTIONAL <mark:apDate> element that contains the date the
trademark was applied for.
Lozano Standards Track [Page 7]
RFC 7848 Mark and Signed Mark June 2016
* A <mark:regNum> element that contains the trademark
registration number registered in the trademark office.
* A <mark:regDate> element that contains the date the trademark
was registered.
* An OPTIONAL <mark:exDate> element that contains the expiration
date of the trademark.
o A <mark:treatyOrStatute> element that contains the following child
elements:
* A <mark:id> element; see definition in the <mark:trademark>
section above.
* A <mark:markName> element; see definition in the
<mark:trademark> section above.
* One or more <mark:holder> elements; see definition in the
<mark:trademark> section above.
* Zero or more OPTIONAL <mark:contact> elements; see definition
in the <mark:trademark> section above.
* One or more <mark:protection> elements that contain the
countries and region of the country where the mark is
protected. The <mark:protection> element contains the
following child elements:
+ A <mark:cc> element that contains the two-character code of
the country in which the mark is protected. This is a two-
character code from [ISO3166-2].
+ An OPTIONAL <mark:region> element that contains the name of
a city, state, province, or other geographic region of
<mark:country> in which the mark is protected.
+ Zero or more OPTIONAL <mark:ruling> elements that contain
the two-character code of the national territory in which
the statute or treaty is applicable. This is a two-
character code from [ISO3166-2].
+ Zero or more OPTIONAL <mark:label> elements; see definition
in the <mark:trademark> section above.
* A <mark:goodsAndServices> element; see definition in the
<mark:trademark> section above.
Lozano Standards Track [Page 8]
RFC 7848 Mark and Signed Mark June 2016
* A <mark:refNum> element that contains the serial number of the
mark.
* A <mark:proDate> element that contains the date of protection
of the mark.
* A <mark:title> element that contains the title of the treaty or
statute.
* A <mark:execDate> element that contains the execution date of
the treaty or statute.
o A <mark:court> element that contains the following child elements:
* A <mark:id> element; see definition in the <mark:trademark>
section above.
* A <mark:markName> element; see definition in the
<mark:trademark> section above.
* One or more <mark:holder> elements; see definition in the
<mark:trademark> section above.
* Zero or more OPTIONAL <mark:contact> elements; see definition
in the <mark:trademark> section above.
* Zero or more OPTIONAL <mark:label> elements; see definition in
the <mark:trademark> section above.
* A <mark:goodsAndServices> element; see definition in the
<mark:trademark> section above.
* A <mark:refNum> element that contains the reference number of
the court's opinion.
* A <mark:proDate> element that contains the date of protection
of the mark.
* A <mark:cc> element that contains the two-character code of the
country where the court is located. This is a two-character
code from [ISO3166-2].
* Zero or more OPTIONAL <mark:region> elements that contain the
name of a city, state, province, or other geographic region of
<mark:cc> in which the mark is protected. In case
<mark:region> is specified, a default-deny approach MUST be
assumed regarding the regions of a country.
Lozano Standards Track [Page 9]
RFC 7848 Mark and Signed Mark June 2016
* A <mark:courtName> element that contains the name of the court.
2.3. Signed Mark
The <smd:signedMark> is a digitally signed XML document using an XML
Signature [XMLDSIG]. The <smd:signedMark> XML document (SMD)
includes a required "id" attribute of type XML Schema Definition
(XSD) ID for use with an IDREF URI from the Signature element. The
SMD might be transmitted as part of a protocol already based on XML;
therefore, exclusive XML canonicalization as defined in [XMLC14N]
MUST be used.
A <smd:signedMark> element substitutes for the
<smd:abstractSignedMark> abstract element to define a concrete
definition of a signed mark. The <smd:abstractSignedMark> element
can be replaced by other signed mark definitions using the XML schema
substitution groups feature.
The child elements of the <smd:signedMark> element include:
o The <smd:id> element that uniquely identifies an SMD in relation
to a repository of SMDs potentially maintained by more than one
issuer. The <smd:id> value is a concatenation of the local
identifier, followed by a hyphen ("-", ASCII value 0x002D),
followed by the issuer identifier.
o A <smd:issuerInfo> element that contains the information of the
issuer of the mark registration. An "issuerID" attribute is used
to specify the issuer identifier. The child elements include:
* A <smd:org> element that contains the organization name of the
issuer.
* A <smd:email> element that contains the issuer customer support
email address.
* An OPTIONAL <smd:url> element that contains the HTTP or HTTPS
URL of the issuer's site.
* An OPTIONAL <smd:voice> element that contains the issuer's
voice telephone number.
o A <smd:notBefore> element that contains the creation date and time
of the SMD.
o A <smd:notAfter> element that contains the expiration date and
time of the SMD.
Lozano Standards Track [Page 10]
RFC 7848 Mark and Signed Mark June 2016
o A <mark:mark> element that contains the mark information as
defined in Section 2.2.
The following is an example of an SMD:
<?xml version="1.0" encoding="UTF-8"?>
<smd:signedMark xmlns:smd="urn:ietf:params:xml:ns:signedMark-1.0"
id="smd1">
<smd:id>0000001751376056503931-65535</smd:id>
<smd:issuerInfo issuerID="65535">
<smd:org>ICANN TMCH TESTING TMV</smd:org>
<smd:email>notavailable@example.com</smd:email>
<smd:url>https://www.example.com</smd:url>
<smd:voice>+32.000000</smd:voice>
</smd:issuerInfo>
<smd:notBefore>2013-08-09T13:55:03.931Z</smd:notBefore>
<smd:notAfter>2017-07-23T22:00:00.000Z</smd:notAfter>
<mark:mark xmlns:mark="urn:ietf:params:xml:ns:mark-1.0">
<mark:trademark>
<mark:id>00052013734689731373468973-65535</mark:id>
<mark:markName>Test & Validate</mark:markName>
<mark:holder entitlement="owner">
<mark:org>Ag corporation</mark:org>
<mark:addr>
<mark:street>1305 Bright Avenue</mark:street>
<mark:city>Arcadia</mark:city>
<mark:sp>CA</mark:sp>
<mark:pc>90028</mark:pc>
<mark:cc>US</mark:cc>
</mark:addr>
</mark:holder>
<mark:contact type="agent">
<mark:name>Tony Holland</mark:name>
<mark:org>Ag corporation</mark:org>
<mark:addr>
<mark:street>1305 Bright Avenue</mark:street>
<mark:city>Arcadia</mark:city>
<mark:sp>CA</mark:sp>
<mark:pc>90028</mark:pc>
<mark:cc>US</mark:cc>
</mark:addr>
<mark:voice>+1.2025562302</mark:voice>
<mark:fax>+1.2025562301</mark:fax>
<mark:email>info@agcorporation.com</mark:email>
</mark:contact>
<mark:jurisdiction>US</mark:jurisdiction>
<mark:class>15</mark:class>
<mark:label>testandvalidate</mark:label>
Lozano Standards Track [Page 11]
RFC 7848 Mark and Signed Mark June 2016
<mark:label>test---validate</mark:label>
<mark:label>testand-validate</mark:label>
<mark:label>test-et-validate</mark:label>
<mark:label>test-validate</mark:label>
<mark:label>test--validate</mark:label>
<mark:label>test-etvalidate</mark:label>
<mark:label>testetvalidate</mark:label>
<mark:label>testvalidate</mark:label>
<mark:label>testet-validate</mark:label>
<mark:goodsAndServices>guitar</mark:goodsAndServices>
<mark:regNum>1234</mark:regNum>
<mark:regDate>2012-12-31T23:00:00.000Z</mark:regDate>
</mark:trademark>
</mark:mark>
<Signature xmlns="http://www.w3.org/2000/09/xmldsig#">
<SignedInfo>
<CanonicalizationMethod
Algorithm="http://www.w3.org/2001/10/xml-exc-c14n#"/>
<SignatureMethod
Algorithm="http://www.w3.org/2001/04/xmldsig-more#rsa-sha256"/>
<Reference URI="#smd1">
<Transforms>
<Transform
Algorithm="http://www.w3.org/2000/09/xmldsig#enveloped-signature"/>
</Transforms>
<DigestMethod
Algorithm="http://www.w3.org/2001/04/xmlenc#sha256"/>
<DigestValue>wgyW3nZPoEfpptlhRILKnOQnbdtU6ArM7ShrAfHgDFg=</DigestValue>
</Reference>
</SignedInfo>
<SignatureValue>
jMu4PfyQGiJBF0GWSEPFCJjmywCEqR2h4LD+ge6XQ+JnmKFFCuCZS/3SLKAx0L1w
QDFO2e0Y69k2G7/LGE37X3vOflobFM1oGwja8+GMVraoto5xAd4/AF7eHukgAymD
o9toxoa2h0yV4A4PmXzsU6S86XtCcUE+S/WM72nyn47zoUCzzPKHZBRyeWehVFQ+
jYRMIAMzM57HHQA+6eaXefRvtPETgUO4aVIVSugc4OUAZZwbYcZrC6wOaQqqqAZi
30aPOBYbAvHMSmWSS+hFkbshomJfHxb97TD2grlYNrQIzqXk7WbHWy2SYdA+sI/Z
ipJsXNa6osTUw1CzA7jfwA==
</SignatureValue>
<KeyInfo>
<X509Data>
<X509Certificate>
MIIESTCCAzGgAwIBAgIBAjANBgkqhkiG9w0BAQsFADBiMQswCQYDVQQGEwJVUzEL
MAkGA1UECBMCQ0ExFDASBgNVBAcTC0xvcyBBbmdlbGVzMRMwEQYDVQQKEwpJQ0FO
TiBUTUNIMRswGQYDVQQDExJJQ0FOTiBUTUNIIFRFU1QgQ0EwHhcNMTMwMjA4MDAw
MDAwWhcNMTgwMjA3MjM1OTU5WjBsMQswCQYDVQQGEwJVUzELMAkGA1UECBMCQ0Ex
FDASBgNVBAcTC0xvcyBBbmdlbGVzMRcwFQYDVQQKEw5WYWxpZGF0b3IgVE1DSDEh
MB8GA1UEAxMYVmFsaWRhdG9yIFRNQ0ggVEVTVCBDRVJUMIIBIjANBgkqhkiG9w0B
AQEFAAOCAQ8AMIIBCgKCAQEAo/cwvXhbVYl0RDWWvoyeZpETVZVVcMCovUVNg/sw
Lozano Standards Track [Page 12]
RFC 7848 Mark and Signed Mark June 2016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</X509Certificate>
</X509Data>
</KeyInfo>
</Signature>
</smd:signedMark>
NOTE: The example shown above includes white space for indentation
purposes. It is RECOMMENDED that SMDs do not include white space
between the XML elements, in order to mitigate risks of invalidating
the digital signature when transferring of SMDs between applications
takes place.
2.4. Encoded Signed Mark
The <smd:encodedSignedMark> element contains an encoded form of an
SMD (described in Section 2.3), with the encoding defined by the
"encoding" attribute with the default "encoding" value of "base64"
[RFC4648].
The following is an example of a <smd:encodedSignedMark> element that
uses the default "base64" for encoding a <smd:signedMark> element.
<smd:encodedSignedMark
xmlns:smd="urn:ietf:params:xml:ns:signedMark-1.0">
PD94bWwgdmVyc2lvbj0iMS4wIiBlbmNvZGluZz0iVVRGLTgiPz4KPHNtZDpzaWduZWRNYXJ
rIHhtbG5zOnNtZD0idXJuOmlldGY6cGFyYW1zOnhtbDpuczpzaWduZWRNYXJrLTEuMCIgaW
... (base64 data elided for brevity) ...
PC9zbWQ6c2lnbmVkTWFyaz4=
</smd:encodedSignedMark>
Lozano Standards Track [Page 13]
RFC 7848 Mark and Signed Mark June 2016
3. Formal Syntax
Two schemas are presented here. The first schema is the schema for
the Signed Mark object. The second schema is the schema for the Mark
object.
The formal syntax presented here is a complete schema representation
of the object mapping suitable for automated validation of EPP XML
instances. The BEGIN and END tags are not part of the schema; they
are used to note the beginning and ending of the schema for URI
registration purposes.
3.1. Signed Mark Schema
BEGIN
<?xml version="1.0" encoding="UTF-8"?>
<schema
targetNamespace="urn:ietf:params:xml:ns:signedMark-1.0"
xmlns:smd="urn:ietf:params:xml:ns:signedMark-1.0"
xmlns:mark="urn:ietf:params:xml:ns:mark-1.0"
xmlns:dsig="http://www.w3.org/2000/09/xmldsig#"
xmlns="http://www.w3.org/2001/XMLSchema"
elementFormDefault="qualified">
<annotation>
<documentation>
Schema for representing a Signed Mark object.
</documentation>
</annotation>
<import namespace="urn:ietf:params:xml:ns:mark-1.0" />
<import namespace="http://www.w3.org/2000/09/xmldsig#" />
<!--
Abstract Signed Mark object for replacement via substitution.
-->
<element name="abstractSignedMark" type="smd:abstractSignedMarkType"
abstract="true"/>
<!--
Empty type for use in extending for a Signed Mark object.
-->
<complexType name="abstractSignedMarkType"/>
<element name="signedMark" type="smd:signedMarkType"
substitutionGroup="smd:abstractSignedMark"/>
<element name="encodedSignedMark" type="smd:encodedSignedMarkType"/>
Lozano Standards Track [Page 14]
RFC 7848 Mark and Signed Mark June 2016
<complexType name="signedMarkType">
<complexContent>
<extension base="smd:abstractSignedMarkType">
<sequence>
<element name="id" type="mark:idType"/>
<element name="issuerInfo" type="smd:issuerInfoType"/>
<element name="notBefore" type="dateTime"/>
<element name="notAfter" type="dateTime"/>
<element ref="mark:abstractMark"/>
<element ref="dsig:Signature"/>
</sequence>
<attribute name="id" type="ID" use="required"/>
</extension>
</complexContent>
</complexType>
<complexType name="issuerInfoType">
<sequence>
<element name="org" type="token"/>
<element name="email" type="mark:minTokenType"/>
<element name="url" type="token" minOccurs="0"/>
<element name="voice" type="mark:e164Type" minOccurs="0"/>
</sequence>
<attribute name="issuerID" type="token" use="required"/>
</complexType>
<complexType name="encodedSignedMarkType">
<simpleContent>
<extension base="token">
<attribute name="encoding" type="token" default="base64"/>
</extension>
</simpleContent>
</complexType>
</schema>
END
3.2. Mark Schema
BEGIN
<?xml version="1.0" encoding="UTF-8"?>
<schema
targetNamespace="urn:ietf:params:xml:ns:mark-1.0"
xmlns:mark="urn:ietf:params:xml:ns:mark-1.0"
xmlns="http://www.w3.org/2001/XMLSchema"
elementFormDefault="qualified">
<annotation>
<documentation>
Lozano Standards Track [Page 15]
RFC 7848 Mark and Signed Mark June 2016
Schema for representing a Trademark, also referred to
as Mark.
</documentation>
</annotation>
<!--
Abstract Mark object for replacement via substitution.
-->
<element name="abstractMark" type="mark:abstractMarkType"
abstract="true"/>
<!--
<mark:mark> element definition
-->
<element name="mark" type="mark:markType"
substitutionGroup="mark:abstractMark"/>
<!--
Empty type for use in extending for a Mark object.
-->
<complexType name="abstractMarkType"/>
<!--
<mark:mark> child elements
-->
<complexType name="markType">
<complexContent>
<extension base="mark:abstractMarkType">
<sequence>
<element name="trademark" type="mark:trademarkType"
minOccurs="0" maxOccurs="unbounded"/>
<element name="treatyOrStatute"
type="mark:treatyOrStatuteType" minOccurs="0"
maxOccurs="unbounded"/>
<element name="court" type="mark:courtType" minOccurs="0"
maxOccurs="unbounded"/>
</sequence>
</extension>
</complexContent>
</complexType>
<complexType name="holderType">
<sequence>
<element name="name" type="token" minOccurs="0"/>
<element name="org" type="token" minOccurs="0"/>
<element name="addr" type="mark:addrType"/>
<element name="voice" type="mark:e164Type" minOccurs="0"/>
<element name="fax" type="mark:e164Type" minOccurs="0"/>
Lozano Standards Track [Page 16]
RFC 7848 Mark and Signed Mark June 2016
<element name="email" type="mark:minTokenType" minOccurs="0"/>
</sequence>
<attribute name="entitlement" type="mark:entitlementType"/>
</complexType>
<complexType name="contactType">
<sequence>
<element name="name" type="token"/>
<element name="org" type="token" minOccurs="0"/>
<element name="addr" type="mark:addrType"/>
<element name="voice" type="mark:e164Type"/>
<element name="fax" type="mark:e164Type" minOccurs="0"/>
<element name="email" type="mark:minTokenType"/>
</sequence>
<attribute name="type" type="mark:contactTypeType"/>
</complexType>
<complexType name="trademarkType">
<sequence>
<element name="id" type="mark:idType"/>
<element name="markName" type="token"/>
<element name="holder" type="mark:holderType"
maxOccurs="unbounded" />
<element name="contact" type="mark:contactType" minOccurs="0"
maxOccurs="unbounded"/>
<element name="jurisdiction" type="mark:ccType"/>
<element name="class" type="integer" minOccurs="0"
maxOccurs="unbounded"/>
<element name="label" type="mark:labelType" minOccurs="0"
maxOccurs="unbounded"/>
<element name="goodsAndServices" type="token" />
<element name="apId" type="token" minOccurs="0"/>
<element name="apDate" type="dateTime" minOccurs="0"/>
<element name="regNum" type="token"/>
<element name="regDate" type="dateTime"/>
<element name="exDate" type="dateTime" minOccurs="0"/>
</sequence>
</complexType>
<complexType name="treatyOrStatuteType">
<sequence>
<element name="id" type="mark:idType"/>
<element name="markName" type="token"/>
<element name="holder" type="mark:holderType"
maxOccurs="unbounded" />
<element name="contact" type="mark:contactType" minOccurs="0"
maxOccurs="unbounded"/>
<element name="protection" type="mark:protectionType"
Lozano Standards Track [Page 17]
RFC 7848 Mark and Signed Mark June 2016
maxOccurs="unbounded"/>
<element name="label" type="mark:labelType" minOccurs="0"
maxOccurs="unbounded"/>
<element name="goodsAndServices" type="token" />
<element name="refNum" type="token"/>
<element name="proDate" type="dateTime"/>
<element name="title" type="token"/>
<element name="execDate" type="dateTime"/>
</sequence>
</complexType>
<complexType name="courtType">
<sequence>
<element name="id" type="mark:idType"/>
<element name="markName" type="token"/>
<element name="holder" type="mark:holderType"
maxOccurs="unbounded" />
<element name="contact" type="mark:contactType" minOccurs="0"
maxOccurs="unbounded"/>
<element name="label" type="mark:labelType" minOccurs="0"
maxOccurs="unbounded"/>
<element name="goodsAndServices" type="token" />
<element name="refNum" type="token"/>
<element name="proDate" type="dateTime"/>
<element name="cc" type="mark:ccType"/>
<element name="region" type="token" minOccurs="0"
maxOccurs="unbounded"/>
<element name="courtName" type="token"/>
</sequence>
</complexType>
<!--
Address (<mark:addr>) child elements
-->
<complexType name="addrType">
<sequence>
<element name="street" type="token" minOccurs="1" maxOccurs="3"/>
<element name="city" type="token"/>
<element name="sp" type="token" minOccurs="0"/>
<element name="pc" type="mark:pcType" minOccurs="0"/>
<element name="cc" type="mark:ccType"/>
</sequence>
</complexType>
<!--
<mark:protection> child elements
-->
<complexType name="protectionType">
Lozano Standards Track [Page 18]
RFC 7848 Mark and Signed Mark June 2016
<sequence>
<element name="cc" type="mark:ccType"/>
<element name="region" type="token" minOccurs="0"/>
<element name="ruling" type="mark:ccType"
minOccurs="0" maxOccurs="unbounded"/>
</sequence>
</complexType>
<!--
Postal code definition
-->
<simpleType name="pcType">
<restriction base="token">
<maxLength value="16"/>
</restriction>
</simpleType>
<!--
Country code definition
-->
<simpleType name="ccType">
<restriction base="token">
<length value="2"/>
</restriction>
</simpleType>
<!--
Phone number with extension definition
-->
<complexType name="e164Type">
<simpleContent>
<extension base="mark:e164StringType">
<attribute name="x" type="token"/>
</extension>
</simpleContent>
</complexType>
<!--
Phone number with extension definition
-->
<simpleType name="e164StringType">
<restriction base="token">
<pattern value="(\+[0-9]{1,3}\.[0-9]{1,14})?"/>
<maxLength value="17"/>
</restriction>
</simpleType>
<!--
Lozano Standards Track [Page 19]
RFC 7848 Mark and Signed Mark June 2016
Id type definition
-->
<simpleType name="idType">
<restriction base="token">
<pattern value="\d+-\d+"/>
</restriction>
</simpleType>
<!--
DNS label type definition
-->
<simpleType name="labelType">
<restriction base="token">
<minLength value="1"/>
<maxLength value="63"/>
<pattern value="[a-zA-Z0-9]([a-zA-Z0-9\-]*[a-zA-Z0-9])?"/>
</restriction>
</simpleType>
<!--
Type used for email addresses
-->
<simpleType name="minTokenType">
<restriction base="token">
<minLength value="1"/>
</restriction>
</simpleType>
<simpleType name="entitlementType">
<restriction base="token">
<enumeration value="owner"/>
<enumeration value="assignee"/>
<enumeration value="licensee"/>
</restriction>
</simpleType>
<simpleType name="contactTypeType">
<restriction base="token">
<enumeration value="owner"/>
<enumeration value="agent"/>
<enumeration value="thirdparty"/>
</restriction>
</simpleType>
</schema>
END
Lozano Standards Track [Page 20]
RFC 7848 Mark and Signed Mark June 2016
4. IANA Considerations
This document uses URNs to describe XML namespaces and XML schemas
conforming to the registry mechanism described in [RFC3688]. IANA
has registered two URI assignments: signed mark (signedMark-1.0) and
mark (mark-1.0).
o The signed mark namespace (signedMark-1.0) has been registered in
the "ns" registry.
URI: urn:ietf:params:xml:ns:signedMark-1.0
Registrant Contact: IESG
XML: None. Namespace URIs do not represent an XML specification.
o The signed mark schema (signedMark-1.0) has been registered in the
"schema" registry.
URI: urn:ietf:params:xml:schema:signedMark-1.0
Registrant Contact: IESG
XML: See the "Formal Syntax" section of this document.
o The mark namespace (mark-1.0) has been registered in the "ns"
registry.
URI: urn:ietf:params:xml:ns:mark-1.0
Registrant Contact: IESG
XML: None. Namespace URIs do not represent an XML specification.
o The mark schema (mark-1.0) has been registered in the "schema"
registry.
URI: urn:ietf:params:xml:schema:mark-1.0
Registrant Contact: IESG
XML: See the "Formal Syntax" section of this document.
Lozano Standards Track [Page 21]
RFC 7848 Mark and Signed Mark June 2016
5. Security Considerations
The security of a Signed Mark object depends on the security of the
underlying XML Digital Signature (DSIG) algorithms. As such, all the
security considerations from [XMLDSIG] apply here as well.
The digital signature algorithm used in Signed Mark objects SHOULD be
RSA-SHA256 [RFC6931]. The size of the RSA key SHOULD be at least
2048 bits. A valid reason for choosing something else would be if
RSA-SHA256 is deemed to not provide sufficient security.
In the case of the ICANN TMCH, Signed Mark objects use the algorithms
for digesting and signing recommended in this document.
Signed Mark objects are used primarily for domain name registrations
in gTLDs during the Sunrise Period, but other third parties might be
using them. A party using Signed Mark objects should verify that the
digital signature is valid based on local policy. In the case of
gTLDs, the Rights Protection Mechanism Requirements document
[ICANN-TMCH] defines such policy, and the PKI is defined in [TMCH].
Implementations will need to implement such a PKI (or an equivalent)
in order for the signatures defined in this document to have any
useful semantics.
6. References
6.1. Normative References
[ICANN-TMCH]
ICANN, "Trademark Clearinghouse; Rights Protection
Mechanism Requirements", 2013,
<http://newgtlds.icann.org/en/about/
trademark-clearinghouse/rpm-requirements-30sep13-en.pdf>.
[ISO3166-2]
ISO, "International Standard for country codes and codes
for their subdivisions", 2006,
<http://www.iso.org/iso/home/standards/country_codes.htm>.
[ITU.E164.2005]
International Telecommunication Union, "The international
public telecommunication numbering plan", ITU-T
Recommendation E.164, November 2010,
<https://www.itu.int/rec/T-REC-E.164-201011-I/en>.
Lozano Standards Track [Page 22]
RFC 7848 Mark and Signed Mark June 2016
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
<http://www.rfc-editor.org/info/rfc2119>.
[RFC3688] Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
DOI 10.17487/RFC3688, January 2004,
<http://www.rfc-editor.org/info/rfc3688>.
[RFC4648] Josefsson, S., "The Base16, Base32, and Base64 Data
Encodings", RFC 4648, DOI 10.17487/RFC4648, October 2006,
<http://www.rfc-editor.org/info/rfc4648>.
[RFC5322] Resnick, P., Ed., "Internet Message Format", RFC 5322,
DOI 10.17487/RFC5322, October 2008,
<http://www.rfc-editor.org/info/rfc5322>.
[RFC5890] Klensin, J., "Internationalized Domain Names for
Applications (IDNA): Definitions and Document Framework",
RFC 5890, DOI 10.17487/RFC5890, August 2010,
<http://www.rfc-editor.org/info/rfc5890>.
[RFC6931] Eastlake 3rd, D., "Additional XML Security Uniform
Resource Identifiers (URIs)", RFC 6931,
DOI 10.17487/RFC6931, April 2013,
<http://www.rfc-editor.org/info/rfc6931>.
[WIPO-NICE-CLASSES]
WIPO, "Nice Classification", January 2016,
<http://www.wipo.int/classifications/nice/en>.
[WIPO.ST3] WIPO, "Recommended standard on two-letter codes for the
representation of states, other entities and
intergovernmental organizations", Standard ST.3, February
2015, <http://www.wipo.int/standards/en/pdf/03-03-01.pdf>.
[XMLC14N] W3C, "Exclusive XML Canonicalization Version 1.0",
W3C Recommendation, July 2002,
<http://www.w3.org/TR/2002/REC-xml-exc-c14n-20020718>.
[XMLDSIG] W3C, "XML Signature Syntax and Processing Version 1.1",
W3C Recommendation, April 2013,
<http://www.w3.org/TR/xmldsig-core1>.
Lozano Standards Track [Page 23]
RFC 7848 Mark and Signed Mark June 2016
6.2. Informative References
[EPP-LAUNCH]
Gould, J., Tan, W., and G. Brown, "Launch Phase Mapping
for the Extensible Provisioning Protocol (EPP)", Work in
Progress, draft-ietf-regext-launchphase-00, April 2016.
[RFC5105] Lendl, O., "ENUM Validation Token Format Definition",
RFC 5105, DOI 10.17487/RFC5105, December 2007,
<http://www.rfc-editor.org/info/rfc5105>.
[RFC5730] Hollenbeck, S., "Extensible Provisioning Protocol (EPP)",
STD 69, RFC 5730, DOI 10.17487/RFC5730, August 2009,
<http://www.rfc-editor.org/info/rfc5730>.
[TMCH] Lozano, G., "ICANN TMCH functional specifications", Work
in Progress, draft-ietf-regext-tmch-func-spec-00, April
2016.
Acknowledgements
Special thanks to Chris Wright for creating the first prototype of an
SMD and to James Gould, Wil Tan, and Gavin Brown for creating the
mark and SMD definitions in "Launch Phase Mapping for the Extensible
Provisioning Protocol (EPP)" [EPP-LAUNCH], on which this document is
based. Portions of the Security Considerations section were
shamefully copied from RFC 5105 [RFC5105]. The author would like to
acknowledge the following individuals for their contributions to this
document: Scott Hollenbeck and Jan Jansen.
Author's Address
Gustavo Lozano
ICANN
12025 Waterfront Drive, Suite 300
Los Angeles, CA 90292
United States
Phone: +1.3103015800
Email: gustavo.lozano@icann.org
Lozano Standards Track [Page 24]